Resolved: Dell Boot Loop Error on Windows 10 - With Images

While Dell computers are known for their high performance, users do encounter issues with them, such as an endless cycle of Dell laptop restarts. Noticing that many users have experienced this problem and are seeking solutions, here's a real-life scenario.

To solve this, we've gathered data and performed tests. So, if you're experiencing the Dell boot loop problem, you're in the right place. First, let's find out the reasons why your Dell computer or laptop is stuck in a boot loop.

Why is your Dell computer stuck in a boot loop?

Does your Dell laptop often restart by itself or get stuck on the Dell logo screen? This section will introduce several common causes for this issue. Read on for more details.

• Operating system corruption: Corruption of the operating system means that some critical system files are missing or damaged (this can happen if the computer shut down unexpectedly during an update, or froze while in hibernation mode). This can cause your entire machine to behave abnormally.
• Malware infection: Certain forms of malware can affect your ability to use your computer, causing your Dell laptop or PC to get stuck on the startup screen.
• Battery or charger failure: Your laptop battery may be worn out and unable to provide enough power to the computer.
• Memory failure: Your laptop's RAM could be faulty, causing your computer to crash.
• Hard drive failure: If a hard drive failure leads to a boot error, you might see messages like "No boot sector found" or "Windows boot failure."

You can help by clicking on the buttons to share this article and raise awareness of these issues.

As mentioned above, a Dell laptop or computer stuck in a boot loop error can be caused by various reasons, such as hardware interference, malware infection, software conflict, corrupted system files, and so on. These reasons might lead to the Windows 10/11 getting stuck at the loading/boot screen. So, how should we fix the Dell boot loop issue?

How to Fix Dell Boot Loop Error on Windows 10 – 5 Solutions

This article will provide you with four effective methods to resolve the Dell boot loop issue. Before we begin, try this quick fix first.

1. Press the FN key (Function key) at startup.
2. Hold the FN key and tap the Windows key to bypass the issue. This should display the login screen.

If the previous steps do not resolve the issue, there are three additional Dell boot loop repair solutions.

Solution 1: Apply Startup Repair using the tool "Partition Master"

In the first part, we learned several possible causes of the Dell boot loop error, but it's hard to tell which one affects your computer. Therefore, a powerful "Boot Repair" feature from Partition Master Professional will be your perfect solution. This tool can effectively fix various boot fail errors and get your computer started.

Fix Dell Boot Loop Error with the Comprehensive Guide:

Step 1: Connect the external hard drive/USB to the PC, launch AOMEI Partition Assistant, and click "Make Bootable Media".

Step 2: Select the available USB drive or CD/DVD, and click "Create." You can also burn the Windows ISO image file to media.

Create Bootable Disk of Partition Master Tools

Step 3. Connect the bootable drive to the new computer and press F2/Del to enter BIOS. Then, set the WinPE bootable drive as the boot disk and press F10 to exit.

Step 4. Restart your computer and enter the WinPE interface. Then open the tool “Partition Master,” and click on “Boot Repair” under “Toolbox.”

Step 5: Select the system you want to fix, then click “Repair.”

Step 6: Wait a moment, and you'll receive a message that the repair was successful. Click “OK” to finish the Startup Repair process.

In addition to fixing the Dell boot loop error, the Partition Master tool can also be applied to resolve startup issues like blue screen/black screen/white screen/yellow screen, etc.:

Solution 2: Perform a hard reset

A hardware component on your Dell computer might be interfering with the normal Windows startup process. To perform a hard reset on your Dell laptop or desktop, follow this guide to fix the Dell boot loop issue:

Step 1. < strong > Unplug all devices from your Dell laptop/computer</strong> including printer, scanner, SD card, USB cable, card reader, USB flash drive, CD, DVD, etc. If you are using a desktop, you should only keep the monitor, mouse and keyboard connected.

Step two: Remove the power cord, take out the laptop battery (if you can), and hold down the power button for about 15 seconds.

Step three: Plug it back in, and try turning it on again.

Read more: Fix Windows 10 Boot Loop

Fix 3: Clean Boot Troubleshooting

Software conflicts might occur during the installation or update/running of programs in Windows 10, which can lead to Dell boot loop error. We can identify the specific conflict causing the issue by performing a clean boot. Please follow the steps below to troubleshoot the Dell boot loop issue:

Step 1: Boot in Safe Mode

• Turn your laptop/computer on and off three times. On the third try, your Dell laptop/computer will automatically boot into the Windows Recovery Environment (WinRE).
• Click “Troubleshoot” > “Advanced options” > “Advanced startup options” > “Startup settings” > “Restart.”
• Your Dell laptop/computer will restart and enter the Startup Settings menu. Press the number 4 to select “Enable Safe Mode.”

Step 2: Perform a clean boot:

1. Click on the search box at the bottom of the screen, type "msconfig," and then select "System Configuration" from the search results. 2. In the "System Configuration" dialog box, under the "Services" tab, check the box that says "Hide all Microsoft services," and then click "Disable all."

5. On that same page, click Open Task Manager.

2. In the Task Manager's Startup tab, select each startup item and click Disable. When you're done, close the Task Manager.

4. Return to the System Configuration dialog box's Startup tab, click OK, and then reboot.

The third step is to identify where the problem lies.

If the startup cycle error does not occur in a clean boot environment, you can determine the specific startup application/service that is causing the startup cycle error by enabling and disabling startup applications/services one at a time in the System Configuration dialog box, and then restarting the computer.

If you find a problematic item, contact the program manufacturer to see if they can fix the issue. Or, you can try running Windows without that item enabled.

Step 4. Return the Dell computer to Normal Boot:

1. Follow the above steps to access the System Configuration. 2. On the "General" tab, click on "Normal Startup." 3. On the "Services" tab, uncheck "Hide all Microsoft services," and then click "Enable All." 4. On the "Startup" tab, click "Open Task Manager," and then enable all startup programs. Close Task Manager and click "OK" on the Startup tab in the System Configuration dialog box. 5. Restart your computer as prompted.

This method is quite time-consuming and requires several taps from the user, so follow the tutorial closely to avoid any other errors.

Fix 4: Repair the Boot Sector

A damaged or missing Boot Sector or BCD file can also cause a Dell laptop to get stuck in a boot loop. Partition Master Professional is a professional tool for repairing the Boot Sector. It can help you create a Windows installation disc and fix the Boot Sector and BCD files. It can quickly and easily help resolve the Dell laptop boot loop error without losing your data in the process. It performed very well in our tests. Install it on your Dell laptop and start fixing this error.

Step 1: Create a bootable WinPE disk

• Launch Partition Master, and click on “Bootable Media” from the toolbar. Choose “Create Bootable Media”. • Click “Next” to finish the process.

Create a Bootable Disk

Step 2. Boot into Partition Master Live USB

• Connect the bootable USB or CD/DVD to your computer.
• Restart your computer and press F2 or Del to enter BIOS. Set it to boot from "Removable Device" or "CD-ROM Drive." The Partition Master tool will run automatically.

Step 3: Repair the MBR

Click on “Toolbox,” and then select “Rebuild MBR.”

Select the disk and MBR type, then click “Rebuild”.

You'll then see "The MBR for Disk X has been successfully rebuilt."

In addition, this utility can also rebuild MBR, create bootable USB, and help you manage hard drive when the operating system fails to start normally.

Fix 5: Reset your operating system

Corrupted system files can also cause the Dell boot loop. You can reset Windows 10, which will reinstall these files without damaging your data. Reset Windows 10 using the guide below:

After three failed attempts, Windows 10 automatically starts into the Windows Recovery Environment (WinRE).

Step 2: Go to Troubleshoot > Reset this PC > Keep my files.

Step 3: Select your user account and enter your password when prompted.

Step 4: Choose “Reset.” Windows will begin the reset process.

You can also check the following article for more solutions to fix Windows 10 won't start issue.

Windows 10 Won't Boot? 8 Ways to Fix Your Computer

Boot issues with Windows 10 are quite common among users. If you're unsure of the cause and how to fix it, read on. We'll provide you with 8 solutions to the "Windows 10 won't boot" problem.

The bottom line is that Europe's leaders must recognize that the status quo is unsustainable.

This article provides 5 effective solutions to help you fix the Dell boot loop issue on Windows 10: FN key, repair boot sector, hard reset, clean boot troubleshooting, and Windows Reset. Hopefully, these methods will solve your problem. These methods have been tested and proven effective in resolving the issue. I recommend backing up your computer data, especially important files, timely to avoid data loss in case of such errors. The following links are related to boot errors; click on them for more detailed information.

Dell Boot Loop FAQ

In this section, I'll list more related issues. If you have other questions about the Dell boot loop, keep reading to find the answers.

**1. How do I fix the Dell boot loop error?**

A Dell boot loop error can be caused by various issues, such as hardware interference, malware infection, software conflict, or corrupted system files. You can resolve this error by pressing the FN key, performing a hard reset, resetting Windows, or repairing the boot sector.

**Why does my Dell laptop always boot to BIOS?**

If your Dell computer repeatedly boots into BIOS, it might be due to an incorrect boot order. You need to check in the BIOS if you have the correct boot device set. You should set the hard drive as the first boot option. If you cannot find your hard drive in the "Boot Devices" list in BIOS, you might need to consider replacing the hard drive.

What should you do if your Dell computer is stuck on the loading screen?

A Dell computer might get stuck in an endless loop while loading Windows. You can usually fix this by holding down the FN key, turning on your computer, and tapping the Windows key quickly. This should usually bring up the login screen.