Resolve NTFS_FILE_SYSTEM Blue Screen of Death Error in Windows

If your computer runs into a "NTFS_FILE_SYSTEM" Blue Screen of Death (BSOD) error and you haven't tackled it yet, don't stress. You're not the only one. Right here on this page, you can discover reliable ways to fix and get rid of the Windows 10/8 NTFS_FILE_SYSTEM BSOD error on your own: 1. **Restart Your PC**: Occasionally, a straightforward restart can fix temporary system issues. 2. **Inspect Hardware**: Defective hardware, like memory or hard drive, could cause this error. Run a hardware diagnostic tool provided by your computer's manufacturer. 3. **Update Drivers**: Out-of-date or corrupted drivers might trigger BSOD errors. Update all drivers, paying special attention to storage controllers and disk drivers. 4. **System File Checker (SFC) Scan**: Run the SFC command in Command Prompt to scan and mend damaged system files. 5. **DISM Utility**: Utilize the Deployment Imaging and Servicing Management (DISM) tool to correct corruption in the Windows image. 6. **System Restore**: If you've created a system restore point, roll back to a previous working state. 7. **Windows Update**: Make sure your operating system is current with the latest security patches and bug fixes. 8. **Safe Mode Boot**: Booting in safe mode can help identify if a freshly installed software or driver is the culprit. 9. **Windows Memory Diagnostic**: Run the built-in Windows Memory Diagnostic Tool to check for memory problems. 10. **Reinstall Windows**: As a last option, you might need to do a clean installation of Windows, but remember to back up your data first. Follow these steps sequentially, and hopefully, you'll resolve the NTFS_FILE_SYSTEM error. Always create a backup or system image before making significant system alterations.

Tips and Tricks to Resolve NTFS File System Blue Screen of Death (BSOD) Error on Windows

Part 1. Boot Up PC to Fix NTFS_FILE_SYSTEM with Blue Screen of Death (BSOD)

If your computer can boot normally in Safe Mode, you can follow these tips to eliminate the NTFS File System Blue Screen of Death (BSOD) error:

Step 1. Check and Expand Hard Drive Space

As we all know, when a computer lacks sufficient space, it may encounter a blue screen error. You can check whether the disk has enough space to boot the Windows system. If the disk is low on space, you can seek assistance from extending the system partition.

Step 2. Perform Disk Check and System File Checker

Running Disk Check and System File Checker can assist in removing unnecessary fragments on the Windows disk and repairing corrupted system files, which may be causing NTFS BSOD errors on your PC.

1. Press Windows + X and select "Command Prompt (Admin)", then click "Yes" to proceed. 2. Type: chkdsk /f c: and press Enter. (If your system is installed on a different drive, replace 'C' accordingly.) 3. Type: sfc /scannow and press Enter. If the message reads 'Windows Resource Protection found corrupt files but was unable to fix some of them,' you'll need to restart your PC in Safe Mode and run the SFC command again.

Step 3. Update hard drive drivers Update the drivers for your hard drive to ensure optimal performance and compatibility with your system. Here's how to do it: 1. **Identify your hard drive**: First, you need to know which hard drive is installed on your computer. You can find this information by following these steps: - On Windows, press `Windows + X` and choose 'Device Manager'. Look for 'Disk Drives' and expand the category to see the listed drives. - On macOS, open 'About This Mac' from the Apple menu, click 'System Report', then navigate to 'Hardware' > 'Storage'. 2. **Download the latest driver**: Visit the manufacturer's website (e.g., Western Digital, Seagate, Samsung) and locate the support or downloads section. Enter your hard drive model number to find the most recent driver. 3. **Download and install**: Download the appropriate driver for your operating system (Windows, macOS). Save the file to a convenient location on your computer, then follow these steps: - Windows: Double-click the downloaded file, follow the on-screen instructions, and complete the installation process. - macOS: Often, macOS updates drivers automatically, but if needed, you may have to mount the downloaded DMG file, then copy the driver to the 'Library/Extensions' folder in your Mac's root directory. 4. **Reboot your computer**: After installing the updated driver, restart your computer for the changes to take effect. 5. **Verify the update**: To confirm that the driver has been updated successfully, return to the Device Manager in Windows or System Report in macOS and check the driver version under your hard drive entry. Remember that keeping your hard drive drivers up to date can help resolve issues, improve stability, and ensure compatibility with new software.

Try using DriverHandy to update your hard drive drivers. It's an all-in-one Windows driver management tool that can identify outdated and incompatible drivers and update your hard drive drivers to the latest version.

You simply need to allow it to scan your computer for damaged drivers. Once it finds them, click "Update" to resolve the issue.

Part 2: Resolve the NTFS_FILE_SYSTEM Blue Screen Error if the PC fails to boot

If your computer fails to boot entirely with the NTFS_FILE_SYSTEM blue screen error, don't panic. You can resolve this issue by creating a WinPE bootable disk using a tool like partition manager software. Follow these steps to repair file system errors on your Windows computer's hard drive: 1. Download and install the partition manager software on another functioning computer. 2. Launch the software and select the "Create a WinPE bootable media" option. 3. Choose the USB drive or CD/DVD you want to use for the bootable media and follow the software's instructions to create the WinPE disk. 4. Insert the bootable media into the affected computer and restart it. 5. Access the computer's BIOS or UEFI settings during startup (usually by pressing F2, F10, F12, or Del keys, depending on the manufacturer) to change the boot order and prioritize booting from the USB or CD/DVD. 6. Save the changes and exit; your computer should now boot from the WinPE disk. 7. Once in the WinPE environment, launch the partition manager software. 8. Locate the problematic hard drive that's causing the NTFS_FILE_SYSTEM error. 9. Use the software's built-in features to scan and fix file system errors. This may include options like "Check Disk" (chkdsk) or "Repair File System." 10. Wait for the process to complete, and then restart the computer without the bootable media. After following these steps, your computer should be able to boot normally, and the NTFS_FILE_SYSTEM error should be resolved. If the problem persists, consider seeking professional assistance or performing a clean installation of Windows.

1. Create a WinPE bootable disk and restart the PC from it.

1. Create a WinPE bootable disk on a healthy computer that is running the same operating system as yours.
2. Restart your PC from the bootable disk:  

Connect the bootable USB drive or SD card to the PC with the BSOD error and set it to boot from the disk in BIOS. Then, the disk will automatically boot your PC and display the Partition Master tool window.

Now you can proceed with Step 2 to fix and remove file system errors on your system disk.

# 2. Check and repair the NTFS_FILE_SYSTEM blue screen error

You can also utilize the System Optimize feature in the Partition Master tool to eliminate junk files and unnecessary large files that are occupying significant space on the system disk and resulting in a blue screen error with the NTFS file system. Once this is done, restart your computer, and you should be able to run Windows on your PC without encountering any further BSOD (Blue Screen of Death) errors.