There's no doubt that HP is one of the most popular laptop brands in the world, renowned for its high-quality graphics and advanced features. However, many people encounter a common issue where their HP laptop gets stuck on the loading screen.

Caption: An HP laptop stuck on the loading screen. HP laptop stuck on loading screen

If you've used the brand before, you've likely encountered this issue. Have you ever been in big trouble when this happens? You must have been puzzled when stuck at the HP screen. In this blog, we've got your back. Here, you'll discover the best solutions to tackle this problem.

Related Reading: How to Backup HP Laptop on Windows 11/10/8/7 | Clone HP Hard Drive to SSD

Why Does My HP Laptop Get Stuck on the Loading Screen - Reasons

Many users believe that when their laptop gets stuck on the loading screen, there might be some technical issue. Undoubtedly, your system might be facing a technical glitch, but it's not always the case.

Before delving into the solutions to fix the HP laptop stuck on boot screen issue, let's list the possible reasons:

  • ? The most common reason for this error could be a hardware issue. Your system drive (like a USB drive) might be faulty.
  • ?️ Another reason that could cause your laptop to get stuck on the HP boot screen is an issue with the BIOS. Certain files in the operating system might be causing this error.
  • ☕️ A virus or malware attack can also lead to this specific error, along with various other system issues.
  • ⚡ Conflicts with specific software and files can also result in this error appearing on your system.
  • ?️ Lastly, but not least, driver incompatibility is one of the causes of this issue.

Generally, a HP laptop getting stuck on the loading screen could be due to various reasons, ranging from issues with the operating system to virus infections.

Effective Solutions to Fix HP Laptop Stuck Issues

Now that you have a good understanding of the reasons behind the loading screen errors, let's dive into the solutions to this problem.

  1. Solution 1: Disconnect External Devices
  2. Solution 2: Reinstall/Reset RAM
  3. Solution 3: Boot in Safe Mode
  4. Solution 4: Reset BIOS Settings
  5. Solution 5: Run Startup Repair
  6. Solution 6: Reset Graphics Card Drivers
  7. Solution 7: Attempt Power Cycle Reset
  8. Solution 8: Reinstall Windows

1️⃣ Disconnect External Devices

As mentioned earlier, hardware issues are the most common culprits behind an HP laptop screen freezing. Hence, you should start the troubleshooting process from here. Follow the steps below to inspect and identify the cause:

    1. Shut down your system.
    2. Unplug all external devices, such as flash drives, USBs, keyboard, mouse, etc.
    3. Restart your system and plug in each device one by one.
    4. If the problem is caused by a piece of hardware, you will have isolated it.

Finally, you can replace the component and get your system running smoothly again. If you still have problems, that means something else is to blame.

Fix 2️⃣ Reinstall/Reset RAM

Wrong RAM can also lead to the HP loading screen stuck issue. Hence, you might want to try reseating/resetting it. For this, you only need to locate the RAM, take it out, and reinstall it properly.

Be careful when reseating it, as incompatible RAM can also cause other issues. Also, if the laptop doesn't detect the RAM, it may initiate a system test.

Fix 3️⃣: Start in Safe Mode

Windows offers several features to ensure safety in such situations, and one of those options is the Windows Safe Mode. It can help you identify the issue, resolve it, and keep your data secure. Hence, you should use this option to boot your device. Here are the solution steps you can follow.

    1. Shut down the system.
    2. Press the power button to turn on the computer.
    3. Hold down the F8 key as the computer starts, until the Advanced Boot Options screen appears.

Troubleshooting

    2. Open the Advanced startup options window. 3. Go to Startup Settings.

From the new window, select “Startup Repair.” startup settings

  • Select Safe Mode from the options.
  • Click the Restart button.

reset

That way, you don't have to hunt down and fix errors manually. Windows will find them for you and take care of them quickly.

Fix 4️⃣: Restore BIOS

As you now know, system files can also lead to the HP laptop getting stuck on the loading screen error. This means that by reverting the system back to its previous settings (default settings), you might be able to resolve the issue. To do this, you'll need to reset the BIOS to default settings by following these steps:

  • Shut down the system.
  • While starting your notebook, press a specific key (F8 or Windows + B) to enter the BIOS setup.
  • Use the arrow keys on the keyboard to select File, and then choose the Load Default Settings option.

Restore defaults

  • When the Yes option is displayed on the screen, press the Enter key once

It's the easiest method, as you only need to know the BIOS setup key for your system; the rest of the process happens automatically.

Fix 5️⃣: Run Startup Repair

If the issue persists, you can try this method to resolve it.

  • Hold down the power button until your system takes you to Advanced Startup.
  • Select the Troubleshoot option.

Give the computer some time to rest

  • Look for Advanced options, and click on it.
  • In the new window, select Startup Repair.

Select "Startup Repair" from the new window. stratup repair

The system will shut down. Restart in a few seconds to check if Windows is working normally.

Fix 6️⃣: Reset Graphics Driver

Sometimes, your system might throw up an error due to a graphics driver. This could mean that your drivers are either incompatible or outdated. Therefore, you should reset them following the steps below to see if the issue is resolved.

    Hold down Windows + Ctrl + Shift + B simultaneously. This will trigger a restart of your graphics driver.

Fix 7️⃣: Try a power reset

The issue might be with the power (battery). Thus, you should also try the power reset option to resolve the problem of an HP laptop stuck on the loading screen.

    • Shut down your laptop.
    • Remove the battery.
    • Hold down the power button for 15 seconds.
    • Reinsert the battery.
    • Plug in the AC adapter, if necessary.
    • Power on the computer and check if the problem is resolved.

Fix 8️⃣: Reinstall Windows

If none of the above methods work for you, the only solution left is to perform a Windows reinstall. This might be the only way to fix the HP loading screen error on your laptop. Needless to say, you'll lose the files stored on your system drive.

But you can't fix the problem if you don't try it, so you should reformat your laptop and reinstall Windows, which will run smoothly again.

You may also like to read: HP Stuck in Boot Loop | Boot Device Not Found on HP Laptop

How can such problems be prevented?

Caution should always be exercised when dealing with this issue or any other technical problem in the system, meaning you have to prepare for such errors and take preventive measures to ensure data safety. If you don't know how to proceed, you can rely on the task to a Todo Backup tool.

It is a smart backup tool that will keep all the data on your HP laptop safe in cloud storage. Hence, you don't have to worry about data loss even if your system encounters the HP laptop stuck on loading screen error.

This backup utility possesses features that make it an ideal choice for ensuring data security. Download it and leverage its advanced functionalities to comprehensively protect your devices.

Feature Description
Centralized Backup Todo Backup offers centralized backup capabilities. It allows for quick and efficient backup and recovery of data.
Scheduled Backup No need to worry about manually backing up every day. You can schedule backups for the software to run automatically.
Full Disk Clone You can create a complete disk clone or image, meaning it duplicates the entire disk and saves it to cloud storage.
User-Friendly Interface With its simple interface and easy-to-understand options, anyone can use this software. No specialized knowledge is required.

Please create a System Image following the instructions below. This will allow you to restore your HP laptop to a previous working state in case it encounters issues such as getting stuck on the loading screen.

Step 1. On the main screen, tap "Select Backup Content."

Create System Backup Step 1

Step 2: Click on the Operating System category from the four available options.

Create System Backup Step 2

Step 3. Todo Backup will automatically select your system partition; you just need to choose a backup destination.

Create System Backup Step 3

Step 4. You can choose to save the backup file on your local disk or NAS.

Create System Backup Step 5

5. After the backup is completed, you can check the backup status, restore, open, or delete the backup by right-clicking on the backup task on the left.

Create System Backup Step 5

In short

We hope you now have a good understanding of how to resolve the HP laptop stuck on loading screen issue. By going through this guide, you should have found a solution to tackle the problem.

For your safety, we recommend getting a Todo Backup tool and using cloud storage to keep your data. This will keep you secure in any situation, and if you lose your laptop, you can easily restore your data through your registered account on the platform.

Frequently Asked Questions about HP Laptops Stuck on HP Loading Screen

How do I hard reset a HP laptop?

You can hard reset your HP laptop by removing the battery or holding the power button down for at least 15 seconds.

How do I force restart a frozen HP laptop?

You can thaw an HP laptop to restart it by following these steps:

  • Press Ctrl + Alt + Del simultaneously.
  • This will bring up the list of running background apps.
  • Scan through the list to identify the app that's using 100% CPU.
  • Click on End Task to stop the application.
  • Exit the screen to restart your laptop.

To reset an HP laptop, typically follow these steps instead of pressing a specific key combination: 1. Shut down the laptop: Make sure your laptop is completely turned off. 2. Access the recovery options: While booting up, press F11 continuously (on some models, it might be F9 or F2) to enter the Recovery Environment. If that doesn't work, try holding down the Shift key while clicking the power button, which will initiate the Windows Recovery Environment. 3. System Restore: In the Recovery Environment, select "Troubleshoot" > "Reset this PC." You'll have two options: "Keep my files" (which resets settings only) or "Remove everything" (a full reset). 4. Follow the prompts: After choosing an option, follow the on-screen instructions. This process may take some time, depending on your computer and the type of reset you've chosen. Please note that resetting your computer will delete all personal files, apps, and settings, so back up important data before proceeding. If you have BitLocker or other encryption with a password, you might need to unlock it before resetting.

If you're having trouble starting your HP laptop normally, you can use the F11 key to restart in Safe Mode.