How to Fix a Non-Working Mouse in Windows 10? [Step by Step]

PAGE CONTENT: This refers to the content present on a webpage, which can include text, images, videos, graphics, or any other information displayed for users to view and interact with. The term "page content" encompasses everything that is visible to the reader when they visit a specific webpage. It is the primary means of conveying information and engaging with the audience on a website.

An input device, such as a mouse, functions through your PC's Graphical User Interface, or GUI. There are various types of mice available, which can be categorized into wireless and wired options. The mouse facilitates swift navigation and enables rapid action-taking, which is not as convenient with a keyboard alone. However, issues may arise due to hardware problems, driver issues, system complications, or incorrect configuration, leading to the problem of "mouse not working" on Windows 10.

Computing problems can be incredibly frustrating and annoying, particularly when they arise at critical moments. Additionally, maneuvering through your system without a functioning mouse can be quite challenging. Therefore, we've developed valuable solutions to assist you in resolving this issue. But first, let's understand the possible reasons behind this problem.

Why Isn't My Mouse Working?

There could be various reasons for a missing mouse cursor, along with non-functional buttons. However, it might stem from hardware issues, so it's advisable to start by restarting your PC before attempting any troubleshooting steps. This will refresh the operating system and eliminate any corrupt temporary data that might be causing the problem.

There could be various factors contributing to the issue of mouse failure. Let's examine them below:

• Loss of connectivity or power failure.
• Irreparable hardware damage.
• Software requiring updates.
• Operating system malfunction or incorrect configuration.
• Incompatibility between the workspace area and the mouse.
• The mouse must be connected properly.
• The USB port needs to be functioning correctly with the mouse.
• System freeze.
• Lacking or outdated drivers.

How to Fix Mouse Not Working in Windows 10?

Even if you're uncertain about the issue causing the mouse to stop working on Windows 10, there's no need to worry anymore. We're here to help you with various methods to resolve the problem in your favor.

1. Method 1. Reinstall Mouse Driver
2. Method 2. Fix Mouse Issues With the Hardware Troubleshooter
3. Method 3. Turn Off Mouse Power Management
4. Method 4. Re-plug the USB Cable or USB Receiver
5. Method 5. Check for Hardware Damage
6. Method 6. Restart Laptop
7. Method 7. Change BIOS or UEFI Settings

Method 1: Reinstall Mouse Driver

You can reinstall mouse drivers by utilizing the Device Manager on your Windows computer. For instance, you can automatically install mouse drivers through the Microsoft driver repository.

Steps to Use:

Step 1. Find and open Device Manager. To do this, press the "Windows" key and the "X" button simultaneously.

Step 2. Select "Mice and other pointing devices."接下来，选择 "HID-Compliant Mouse"，然后继续进行卸载。

Step 3. You will be prompted to restart your PC之后. Allow the permission for this. You will then notice that your mouse driver has been installed. After that, you can check if

Method 2: Resolve Mouse Issues with the Hardware Troubleshooter

If you encounter a situation where your mouse is not working in Windows 10 even after plugging it in, try the following:

Steps to Use:

Step 1. Tap on "Control Panel" and open it.

Step 2. Tap on "Troubleshooting."

Step 3. Next, run the troubleshooter by selecting the "Hardware and Devices" option.

Step 4. After the process completes, restart your laptop and check if your mouse is functioning properly again.

Method 3: Disable Mouse Power Management

Sometimes, Windows 10 opts to disable certain features to conserve power. For instance, power management can inadvertently impact your Windows PC or laptop by turning off the wireless mouse adapter, even without your awareness.

Steps to Use:

Step 1. Begin by typing "Device Manager" in the search bar of the start menu and then open it. Next, click on "Universal Serial Bus Controllers" to expand the category.

Step 2. Use the down arrow to navigate to the USB Root Hub that connects USB mice.

Step 3. Use the right arrow to navigate to the Power Management tab.

Step 4. Press the tab to allow the PC to save power by turning off the device.

Step 5. To deselect the option, press Ctrl and Space keys simultaneously. Allowing the PC to turn off this item will conserve energy.

Method 4: Reconnect the USB Cable or USB Receiver

If the issue of the mouse not working on Windows 10 occurs, make sure you have connected it properly. For instance, attempt to use another USB port or unplug and plug it in again.

Steps to Use: 1. Begin by ensuring that you have the necessary information or materials for the task at hand. 2. Carefully read or understand the instructions provided. 3. If applicable, gather any tools or equipment required for the process. 4. Follow each step in the order given, making note of any important details or precautions. 5. If a step involves making a decision, carefully consider your options before proceeding. 6. Complete each action diligently, taking your time to avoid mistakes. 7. Keep track of your progress and make adjustments as needed. 8. Upon finishing a step, verify that it has been done correctly before moving on to the next. 9. If you encounter any difficulties or uncertainties, refer back to the instructions or seek assistance from a knowledgeable source. 10. Once all steps have been successfully completed, review your work to ensure everything is as intended. 11. Finally, clean up any mess or put away tools, leaving the area tidy. Remember to always prioritize safety during the process.

Step 1. Begin by removing the cable or receiver from the port.

Step 2. Take a few minutes for the process to settle down.

Step 3. Attempt to reconnect the cable and check if the mouse is functioning again.

Method 5: Check for Hardware Damage

If none of the previously mentioned methods resolve the issue of the mouse not functioning in Windows 10, it's time to investigate it as a hardware component. This will help determine whether the problem lies with the software or the hardware. Proceed by testing the USB ports on your Windows PC. Check if the mouse works in the current port, and continue switching ports until you find one that yields a positive result. If you discover a functional port, it indicates that the issue was hardware-related, specifically with the USB port.

If the issue persists, inspect the mouse for any signs of damage or malfunction. As a secondary test, try using the mouse on a different computer or swap it with another mouse on the same computer. If the mouse fails to function on another PC, it's likely faulty and should be replaced.

Method 6: Restart Laptop

At times, when you're faced with the issue of a non-functional mouse in Windows 10, attempting to restart your device can be a viable solution. You can also do this after disconnecting the mouse. Once the system has restarted, try using the mouse again to see if it's functioning properly.

Method 7: Change BIOS or UEFI Settings

Lastly, if you encounter a mouse not working issue on Windows 10, you can attempt to modify your UEFI settings or BIOS. It's advisable to consult your motherboard's technical documentation for guidance. Additionally, you need to enable Virtual KBC Support for USB in the BIOS.

Steps to Use:

Step 1. Begin by restarting or turning on your PC.

Step 2. Proceed by pressing F12 to enter BIOS/UEFI.

Step 3. Select Devices, then choose USB setup.

Step 4. Choose the option "Enabled" from the USB Virtual KBC Support Menu.

Step 5. Proceed by saving the BIOS settings, then restart your PC.

Step 6. Test your mouse.

Closing Thoughts

A mouse is designed to respond and function seamlessly under your fingertips. You might require assistance in utilizing features such as convenience, portability, or swift response times while maneuvering through your device. However, occasionally, you may encounter a "mouse not working" error on Windows 10 due to specific circumstances. We hope that the solutions provided above will be of assistance in this critical situation, enabling you to resolve your issue. Therefore, continue trying different solutions until you find the one that best fits your needs.

FAQs (Frequently Asked Questions)

After attempting all possible solutions to address your mouse not functioning issue, you might have specific questions lingering in your mind. Find answers to them here:

1. How do I fix an unresponsive mouse on Windows 10?

You can attempt to use the mouse on a different device, switch the ports, or disconnect it to see if it begins functioning properly. Additionally, you can run a driver troubleshooter or attempt to install a new driver. If you're technically proficient, you can also explore adjusting BIOS settings as a last resort.

2. How do I reinstall my USB mouse? To reinstall your USB mouse, follow these steps: 1. **Unplug the Mouse:** Disconnect your USB mouse from the computer. 2. **Restart your Computer:** Turn off your computer and then turn it back on. This will ensure that any cached drivers or settings related to the mouse are cleared. 3. **Plug in the Mouse:** Connect your USB mouse back to a different USB port on your computer. Using a different port can sometimes resolve issues. 4. **Windows:** If you're using a Windows operating system, wait for the system to detect the new hardware automatically. If it doesn't, follow these steps: - Click on the Start button, search for "Device Manager," and open it. - Locate "Mice and other pointing devices" category, expand it. - Right-click on your USB mouse entry and select "Update driver." - Choose "Search automatically for updated driver software" and let Windows look for the latest driver. 5. **MacOS:** On a Mac, the system should automatically recognize and install the necessary drivers. If not: - Go to "System Preferences" and click on "Bluetooth" (if it's a Bluetooth mouse) or "Mouse" (for a wired USB mouse). - If needed, click the "Plus" sign to add a new mouse, and your USB mouse should appear in the list. Click "Add" to pair it. 6. **Wait for Detection:** Wait for your computer to install the driver or complete the pairing process. This may take a few moments. 7. **Verify Functionality:** After the installation or pairing is complete, test your mouse to ensure it's working correctly. If your mouse still doesn't work, you might need to download and install the latest drivers from the manufacturer's website.

To reinstall your mouse, follow these steps:

Step 1. Launch Device Manager. Press the 'R' key, type 'devmgmt.msc' in the search box, and hit Enter.

Step 2. Press the tab after selecting your PC's name.

Step 3. Navigate by selecting the down arrow next to "Mice and other pointing devices."

Step 4. Expand the option by pressing the "Alt" key in combination with the right arrow key.

Step 5. Navigate using the arrow button on the HID-Compliant mouse.

Step 6. Press and hold the Shift, F10, or Fn, Shift, and F10 keys together.

Step 7. Use the down arrow to select Uninstall, and then press the Enter key.

Step 8. Reinstall the mouse driver once more.