MySQL Workbench Crashes on macOS Sonoma! What Should I Do

Users have reported their negative experience with upgrading to macOS Sonoma, where MySQL Workbench consistently crashes after running a query or stored procedure for the second or third time.

If you encounter the error message "MySQL Workbench crashes on macOS Monterey", it means that the MySQLWorkbench.app cannot be launched because Apple is unable to verify it for malicious software. However, there's no need to worry. This issue can be resolved using four practical methods. Let's explore them!

• Fix 1: Recover MySQL Workbench Data Using Software
• Fix 2: Check System Preferences to Address MySQL Workbench Crashes
• Fix 3: Update MySQL Workbench on Your Mac
• Fix 4: Downgrade from macOS Monterey to Ventura

This article will guide you through the potential reasons for MySQL Workbench crashing on macOS Monterey and the remedies. Let's dive in!

MySQL Workbench Crashes on macOS Monterey: Potential Reasons

If you've been experiencing frequent MySQL Workbench crashes on macOS Sonoma, you should check if you have any Subversion plugins installed, such as SCFinderPlugin or SCToolbarButton.

They become obsolete and don't function efficiently in the latest macOS version, like Sonoma, leading to other innocent applications freezing, which is one of the primary reasons for apps not working on Sonoma. Another potential cause for MySQL Workbench crashes on macOS Sonoma is insufficient system resources.

如何解决macOS Sonoma上MySQL Workbench崩溃的问题

Here are the top 4 solutions if you've experienced MySQL Workbench crashes on macOS Monterey. Check them out!

Solution 1: Recover MySQL Workbench Data with Software

An unexpected crash while using MySQL Workbench can result in sudden data loss. However, with the assistance of professional data recovery software, you can effortlessly retrieve all your data. The software recommended is none other than tools Data Recovery Wizard for Mac Pro.

Typically, MySQL database files have the extensions FRM, MYD, or MYI. The table descriptions are located in the *.frm files. The MyISAM index files have the extension *.myi. The table data is stored in the *.myd files.

Similar to various types of data, you risk losing your MySQL files if a system crash, virus attack, accidental formatting, partition loss, or unintentional deletion leads to the loss of a partition.

The agony of data loss persists despite your most diligent efforts to prevent it. Hence, a professional data recovery tool can promptly restore lost or unsaved MySQL Workbench data. Moreover, these tools offer software support for:

• Recovering unsaved Excel files on Mac
• Recovering permanently deleted files on Mac
• Mac PDF file recovery
• Recovering unsaved Word documents on Mac
• Recovering deleted email data on Mac
• ... ...

Many Apple users have utilized the tool Data Recovery Wizard for Mac Pro to recover deleted files from Mac without relying on Time Machine backups. This software is capable of addressing various challenging data loss scenarios. Hence, you should install it on your Mac to recover your lost MySQL Workbench data first! Follow these steps:

Step 1. Search for missing files

Choose the disk location to search for missing files (it can be an internal HDD/SSD or an external storage device) on macOS Sierra, High Sierra, Mojave, Catalina, Big Sur, Monterey, Ventura, and the latest Sonoma. Click the "Search for lost files" button.

Note: Before data recovery, it's recommended to click "Disk Backup" from the left panel to create a backup of your Mac to prevent further data loss. Once backed up, the software can retrieve data from the Mac backup, and your computer can then write new data again.

Step 2. Review the scanning results

Data Recovery Wizard for Mac will immediately scan your selected disk volume and display the scanning results.

Step 3. Select the file(s) and recover Select the files you wish to recover by checking the boxes next to them. Once you've made your selections, click on the "Recover" button to initiate the recovery process. The recovered files will be saved to a location of your choice.

In the scan results, select the file(s) you wish to preview and click the "Recover" button to retrieve them.

Share this article on social media to help others learn more about how to resolve MySQL Workbench crashes on macOS Monterey.

Solution 2: Check System Preferences to Resolve MySQL Workbench Crashes

If the MySQL program crashes due to a setup error or lack of disk space, you can promptly address the issue by closing other applications to free up memory and processing resources. To investigate if there's a setup error, follow these steps:

Step 1. Open "System Preferences > Security & Privacy".

Step 2. A notification with the title "Allow apps downloaded from" will appear, stating that macOS cannot open MySQL Workbench because it was not obtained from an approved source.

Click the "Open Anyway" option.

Step 3. You need to click on the "Open Anyway" button and attempt to launch MySQL Workbench again.

Furthermore, you must ensure that you have adequate free disk space for MySQL Workbench to function correctly. Alternatively, removing the MySQL Workbench plugins might help resolve the error in the affected application.

Suppose your deleted files on Mac still occupy space; no need to worry! This article will instruct you on how to permanently remove files from your Mac's storage space.

Could you please provide the text that needs to be translated into English?

How to Permanently Delete Files on Mac, MacBook Air, iMac

This article presents 4 effective methods to permanently erase files from your Mac. Read more >>

Solution 3: Update MySQL Workbench on Your Mac

Although macOS comes with its own version of MySQL, updating it using standard methods can be challenging. Moreover, since your server is utilizing an isolated instance, the process resembles updating MySQL on a Linux system. MacOS includes SSH within its operating system, which means you will need to run the commands through the terminal.

It can be assumed that you're using Homebrew as a superior package manager, given that it's one of the most convenient methods to install and upgrade MySQL Workbench on a Mac. If you didn't initially use Homebrew to install MySQL, you should not attempt to update it through this channel.

Step 1. Launch the "Terminal" program and log in using the SSH command.

Step 2. These are the primary commands to run using Homebrew:

The command should be automatically installed on version 8.0 and update existing installations. If you encounter any issues, you can try uninstalling the most recent version of MySQL first. Here are the commands to execute:

之后，你可以尝试再次运行更新和安装命令。

Step 3. Make sure you manually restart the MySQL server.

Solution 4: Downgrade from macOS Sonoma to Ventura

You can downgrade from macOS Sonoma to Ventura using Recovery Mode, which comes in handy if you don't have a Time Machine backup or prefer an alternative approach. This method employs built-in system utilities but necessitates erasing your current installation and requires a stable internet connection.

You should proceed to "Disk Utility" to erase your Mac's disk, but make sure to backup your crucial data before doing so. Afterwards, you can reinstall macOS from the macOS Utilities.

Translate into English

Reinstall macOS Not Working: 4 Proven Solutions

This article explores several effective methods to resolve the problem of reinstall macOS not functioning properly. Read more >>

Conclusion

Your endeavors to manage your databases might be hindered if MySQL Workbench fails to launch on your Mac. Owing to enhanced security measures in macOS, applications sourced from outside the authorized App Store are prevented from opening, and MySQL Workbench falls under this category.

Remember to update the software, search for any discrepancies, and if needed, reset the settings. If all else fails, exploring alternative MySQL management applications can provide a solution.

With a bit of time and the right approach, you can overcome this challenge and continue using MySQL databases on your Mac productively. Data loss is quite common during macOS upgrades or when unexpected crashes occur. Therefore, make sure to install the Data Recovery Wizard for Mac Pro today to safeguard against such situations!

FAQs: MySQL Workbench Crashes on macOS Sonoma 1. What is MySQL Workbench? MySQL Workbench is a visual database design tool that integrates SQL development, database administration, and data modeling for MySQL databases. 2. Why does MySQL Workbench crash on macOS Sonoma? Crashes on macOS Sonoma can be due to various reasons, such as compatibility issues with the new operating system, outdated software, conflicting system resources, or missing dependencies. 3. Is MySQL Workbench officially supported on macOS Sonoma? It's essential to check the official system requirements to see if MySQL Workbench is compatible with macOS Sonoma. If not, crashes might occur. 4. How do I update MySQL Workbench to the latest version? Visit the official MySQL website to download the most recent version of MySQL Workbench and follow the installation instructions. 5. Can I run MySQL Workbench in compatibility mode? macOS generally doesn't have a compatibility mode like Windows. However, you can try running it using Rosetta 2, which translates apps designed for Intel processors to run on Apple silicon. 6. Are there any known bugs or issues with MySQL Workbench on macOS Sonoma? Check the MySQL Workbench forums or official release notes for known issues and bug reports related to macOS Sonoma. 7. Should I report the crash to MySQL? If the issue persists after updating or trying troubleshooting steps, it's recommended to report the crash to the MySQL support team with detailed information, including error messages and logs. 8. Can I use an alternative to MySQL Workbench on macOS Sonoma? Yes, there are alternative database management tools available, such as DBeaver, Sequel Pro, or DataGrip, which may work better on macOS Sonoma. 9. Are there any system requirements to run MySQL Workbench smoothly on macOS? Make sure your system meets the minimum hardware and software requirements, including sufficient RAM, storage, and an up-to-date version of Java (if required). 10. What troubleshooting steps can I take before seeking further assistance? - Restart your computer - Disable any third-party plugins or add-ons - Check for conflicting applications or processes - Run the app in safe mode - Verify your MySQL server connection settings - Clear the application's cache and preferences - Install any available macOS updates Remember to backup your data before attempting any troubleshooting steps.

Here are the most informative FAQs to help you better comprehend the subject:

1. Why does my MySQL Workbench keep crashing after an update? After updating MySQL Workbench, it's possible that the application is crashing due to various reasons. Here are some common troubleshooting steps you can try: 1. **Reinstall MySQL Workbench**: Sometimes, a fresh installation can fix issues caused by a problematic update. Uninstall the current version, restart your computer, and then download the latest version from the official MySQL website. 2. **Check for compatibility**: Ensure that your operating system supports the version of MySQL Workbench you're using. Check the system requirements on the MySQL website and make sure your OS meets them. 3. **Update other software components**: Update your graphics card drivers and any other relevant software, as outdated components might cause conflicts with MySQL Workbench. 4. **Disable Add-ons or Plugins**: If you have any third-party add-ons or plugins installed, disable them temporarily to see if they are causing the issue. Sometimes, incompatible plugins can lead to crashes. 5. **Run in Compatibility Mode**: Try running MySQL Workbench in compatibility mode for a previous version of Windows (if applicable). Right-click the MySQL Workbench shortcut, select "Properties," go to the "Compatibility" tab, and choose the appropriate mode. 6. **Check for conflicting processes**: Close other applications that may be using the same resources or causing conflicts. You can use Task Manager to monitor running processes. 7. **Temporarily disable Antivirus or Firewall**: Sometimes, security software can interfere with the proper functioning of MySQL Workbench. Disable your antivirus or firewall temporarily and check if the issue persists. 8. **Review Error Logs**: Look for error messages in the MySQL Workbench log files, usually located in your user folder (e.g., `C:\Users\\AppData\Roaming\MySQL\Workbench\logs`). These logs might provide clues about the cause of the crash. 9. **Contact Support**: If none of the above steps resolve the issue, consider reaching out to the MySQL support team or posting on their forums for further assistance. Remember to always backup your important data before making significant changes to your system.

A corrupted User Snippets file can lead to issues with MySQL Workbench while connecting to databases. If you modify the file outside of Workbench, it might become compromised. Upon the next attempt to connect to a database, MySQL Workbench will need to create a new snippet file if it is deleted, which can disrupt the normal functioning.

2. How to resolve MySQL Workbench crashing on macOS Monterey?

If MySQL Workbench crashes upon startup, you can try removing its settings. The Workbench configuration files are located in the `/Library/Application Support/MySQL/Workbench` folder. To do this, simply delete or rename these files. This will reset the configurations, potentially resolving the crashing issue on macOS Sonoma.

3. Does MySQL Workbench work on Mac?

MySQL Workbench is not only accessible for Mac users but also on Linux and Windows platforms. You can download MySQL Workbench from the following link: .