[Too Slow!] How to Resolve USB 3.0 Transfer Speed Issues

If you have a slow USB 3.0 drive, follow the methods to speed up your device.

Could you please provide the text that needs to be translated into English?

USB 3.0 is Slow on Windows 10

Case 1. "I recently purchased a new USB 3.0 flash drive, but I've observed that its read/write speeds are surprisingly slow. A brand new USB 3.0 drive should ideally have a write speed of at least 15-20 MB per second. However, mine is only managing around 50KB per second."

Case 2. "I usually copy a lot of data to my Kingston USB 3.0 flash drive to play on the media player in the living room. After upgrading to Windows 10, I'm experiencing a very slow transfer rate. Previously, with Windows 7, I would get around 20-30 MB/s, but now the drive has an extremely slow transfer speed on Windows 10! The copy speed is almost 0 bytes!"

Method One: Optimize USB 3.0 Using Device Manager

1. Right-click on the Windows icon and select "Device Manager."

2. Expand "Disk Drives" in Device Manager and locate your USB device. Right-click on it or your hard drive and select "Properties."

3. Navigate to the "Policies" tab and select "Better performance," then click "OK" to confirm that you want to optimize and enhance your USB transfer speed. You might be prompted to restart your computer. After doing so, you should notice significantly faster transfer speeds!

Method Two: Convert USB 3.0 from FAT32 to NTFS

If the file system on your storage device is FAT32, you can convert it to NTFS to enhance the speed of the USB 3.0 drive. Follow these two steps to proceed: 1. Backup your data: Before making any changes, ensure that you have backed up all important files from the USB drive to prevent any potential data loss. 2. Convert the file system: Connect the USB drive to your computer and follow these steps: - Windows: Right-click on the USB drive in File Explorer, select "Format," choose "NTFS" as the file system, and then click "Start." Make sure to uncheck "Quick Format" for a complete conversion. - macOS: Use the Terminal application and type the following command, replacing `/dev/diskX` with the actual disk identifier for your USB drive (you can find this in Disk Utility): `sudo mkfs.ntfs -f /dev/diskX` - Linux: Open a terminal and use the following command, replacing `/dev/sdY` with the appropriate drive letter: `mkfs.ntfs -f /dev/sdY` After the conversion, your USB 3.0 drive should operate faster due to the more efficient NTFS file system.

Part 1: Export and Restore Your Data from USB In this section, we will guide you through the process of exporting and restoring your data from a USB drive. 1. **Exporting Data:** a. Connect your USB drive to your computer's USB port. b. Open File Explorer (Windows) or Finder (Mac). c. Locate the USB drive, usually labeled with its name or capacity in the left pane. d. Select the files or folders you wish to export by clicking on them while holding down the Ctrl key (Windows) or Command key (Mac) for multiple selections. e. Right-click on the selected items and choose "Copy" or press Ctrl+C (Windows) or Command+C (Mac). f. Navigate to the location where you want to save the exported files, such as your desktop or another folder. g. Right-click in the destination folder and select "Paste" or press Ctrl+V (Windows) or Command+V (Mac). The files will now be copied from the USB drive to your chosen location. 2. **Restoring Data:** a. Ensure that your USB drive is still connected to your computer. b. Navigate to the location where you saved the exported files. c. Select the files or folders you want to restore to the USB drive, using the same method as before (Ctrl or Command key for multiple selections). d. Right-click on the selected items and choose "Cut" or press Ctrl+X (Windows) or Command+X (Mac). e. Switch back to the File Explorer or Finder window with your USB drive open. f. Find an appropriate location within the USB drive to restore the files (e.g., the root directory or an existing folder). g. Right-click in the desired location on the USB drive and select "Paste" or press Ctrl+V (Windows) or Command+V (Mac). The files will now be moved from your computer back to the USB drive. Once the restoration process is complete, make sure to safely eject the USB drive from your computer to prevent any data loss.

Before converting your USB 3.0 to NTFS, it's advisable to back up your USB data to a new device to prevent any potential data loss. We recommend trying a reliable data recovery software - Data Recovery Wizard. This tool allows you to comprehensively scan your USB for all existing and even deleted files, and then easily recover them to a secure location with just a few clicks:

Step 1. Launch the Data Recovery Wizard tool. Select the drive where you lost your files and initiate the scanning process. This software enables you to recover lost data from a wide range of devices, including HDD, SSD, USB drive, SD card, pen drive, camera, and so on.

This HTML code represents an image container with a class "img_box_pop" and a pop-up image class "pop_img". The image has an alternative text "select a location to scan," a height of 466 pixels, a width of 700 pixels, and its source is dynamically loaded from "/images/en/data-recovery/drw-pro/screenshots/recover-lost-data-step1.png".

Step 2. Browse the complete scan results. You can select the file type you need by clicking on the file type filter. The data recovery software supports over 1000 file types, including photos, videos, documents, emails, audio files, and many more.

Step 3. Select the files you wish to preview. Click "Recover" and specify a location to save the retrieved data.

Part 2: Convert USB from FAT32 to NTFS

< a href="/partition-manager/epm-free.html">Tools Partition Master Free< /a> offers USB owners a swift and seamless feature 'Convert to NTFS' to change the file system of storage devices without the need for formatting or risking any data loss.

Step 1. Launch the Data Recovery Wizard tool. Select the drive where you lost your files and initiate the scanning process. This software enables you to recover lost data from various devices, such as HDD, SSD, USB drive, SD card, pen drive, camera, and so on.

This HTML code represents an image container with a class "img_box_pop" and a pop-up image class "pop_img". The image has an alternative text "select a location to scan," a height of 466 pixels, a width of 700 pixels, and its source is dynamically set with the data attribute "data-src" pointing to "/images/en/data-recovery/drw-pro/screenshots/recover-lost-data-step1.png".

Step 2. Browse the complete scan results. You can select the file type you need by clicking on the file type filter. The data recovery software supports over 1000 file types, including photos, videos, documents, emails, audio files, and many more.

Step 3. Select the files you wish to preview. Click "Recover" and choose a storage location to save the retrieved data.

Upon completion of the process, you can inspect your USB drive and utilize it for file transfers to observe the changes. If this method does not yield satisfactory results, you can also employ tools like Partition Master as the best USB format tool to format your USB anew for efficient file transfer. Always记得 to back up your USB content to prevent unintended data loss.