Fixed: Windows 10 Startup Repair not working?

Have you ever wondered why Windows 10 Startup Repair is not working? Don't worry. This article from Tool will uncover some reasons behind the unresponsiveness of Windows 10 Automatic Repair and guide you through some quick and effective solutions to fix the issue. Read on to find out more.

Why isn't Windows 10 Automatic Repair working?

Windows 10 Automatic Repair is a built-in utility that addresses any issues with the system files needed to start the operating system.

First, you need to enter the Windows 10 Startup Repair. It scans for damaged, corrupted, or incorrectly configured Windows files. After detecting issues, it replaces those files so that Windows loads and boots up smoothly. However, sometimes the automatic repair gets stuck. This can be a major issue since your system won't start, and you can't do any work.

There are two main scenarios where Windows 10's automatic repair might not work as expected.

Scenario 1: Windows 10/11 Boot Repair Loop

The Windows 10/11 Boot Repair Loop, also referred to as the Startup Repair loop, is a situation where Windows repeatedly boots into Startup Repair without being able to progress further. This creates an infinite loop that prevents the operating system from starting up normally.

Case 2: Windows 10/11 Automatic Repair Fails

The primary objective of Automatic Repair is to fix all problematic files, but there might be instances where it fails to do so. In such cases, a message appears stating, "Automatic Repair couldn't repair your PC." After displaying this message, the system prompts the user to proceed to Advanced Options. This could happen due to corrupted BCD settings, a damaged boot partition, or a Blue Screen of Death (BSOD) on restart.

How to Fix Windows 10 Startup Repair Not Working

So far, we've discussed the issues that can cause Automatic Repair to fail. Let's see how to fix the Boot Repair in Windows 10 with 8 different methods, plus an extra tip on how to back up system files.

1. Solution 1: Disable Automatic Restart
2. Solution 2: Run the CHKDSK Command
3. Solution 3: Boot into Safe Mode and Run Command Prompt
4. Solution 4: Repair MBR and Rebuild BCD
5. Solution 5: Run the Sfc/Scannow Command
6. Solution 6: Disable Early Launch Antimalware Protection
7. Solution 7: Delete Problematic Files
8. Solution 8: Perform a Reset

Solution 1: Disable Automatic Restart

Typically, automatic restarts are designed to reboot the computer in case of errors or malware encounters. However, sometimes this feature can lead to an infinite loop issue, preventing the system from starting up properly.

So, when you have a boot problem, you want to disable auto-rebooting in this way.

Step 1: Restart your system, and you'll see a screen titled “Choose an option.”

Step 2: From this list, choose Troubleshoot > Advanced options > Startup Settings.

Step 3: The setup menu will display nine options. Press or simply the number 9 to select “Disable automatic restart on system failure.”

Step 4: Now, wait for your PC to restart and check if the Windows 10 boot issue is fixed.

Read more:

Fix 2: Run the CHKDSK command

If the boot sector is damaged, a boot repair may not work as expected. Therefore, you must run the CHKDSK command to diagnose and fix all hard drive issues on Windows 10.

Step 1: Restart your PC, and on the Choose an option screen, select Troubleshoot.

2. Click on Troubleshoot > Advanced options > Command Prompt to open the Command Prompt window.

Step 3: Type chkdsk C: / f /r in the Command Prompt window, and press Enter.

Step 4: The system looks for corrupt, damaged, or broken files and tries to repair them.

Fix 3: Boot into Safe Mode and open Command Prompt

Safe Mode starts up your system with basic settings so you can identify and fix the main problems affecting your boot-up. While in Safe Mode, your screen might look a little bland, some of your installed apps won't run, and your computer will operate a bit slower overall. However, once you've fixed the boot-up issue, you can switch back to normal mode at any time.

Here's how to start in Safe Mode using the Command Prompt: 1. First, turn on or restart your computer by pressing the power button. 2. As your computer boots up, repeatedly press the F8 key. This will open the "Advanced Boot Options" menu. 3. Use the arrow keys to select "Safe Mode," then press the Enter key. 4. If your computer has password protection, you may need to enter your login credentials. 5. Once in Safe Mode, click the "Start" button and type "cmd" into the search bar. 6. Right-click on the "Command Prompt" result and choose "Run as administrator." 7. In the Command Prompt window, you can enter commands to diagnose and fix issues. For instance, to scan for viruses, type "sfc /scannow" and press the Enter key. Please note that this method applies to Windows operating systems. Different operating systems may have different steps to enter Safe Mode and use the Command Prompt.

Step one: Restart the system and get to the “Troubleshoot” menu.

2. Select “Troubleshoot” > “Advanced options” > “Command Prompt”; this will open a Command Prompt window.

<b>Step 3:</b> In the Command Prompt window, type <b>bcdedit /set {current} safeboot minimal</b> and press <b>Enter</b>.

Step four: Now reboot the system, and it will come up in Safe Mode.

Step 5: If you need to access the internet on your computer, type in "bcdedit /set {current} safeboot network" and press Enter to start in Safe Mode with Networking.

In addition, you can learn how to enter Safe Mode using other methods in this article:

Repair the MBR and rebuild the BCD.

If Windows 10 is missing, damaged, or has deleted its "Master Boot Record" (MBR) or "Boot Configuration Data," the system won't be able to start. In this case, the easiest way to fix it is by restoring its original settings. This will solve any issues related to the boot sector.

Step 1: Select “Command Prompt” from the System Recovery Options and launch it.

Step 2. Type each of the following commands, pressing the Enter key after you type each one, to fix the startup problem:

These are commands used in the Windows operating system to repair the boot records: 1. bootrec /fixmbr: This command is used to fix the Master Boot Record (MBR). The MBR is a small program on the hard disk that is responsible for loading the operating system's boot information. 2. bootrec /fixboot: This command repairs the boot sector. If the boot sector is corrupted, the system might not start up properly. It writes a new Windows Boot Manager into the boot sector of the system partition. 3. bootrec /rebuildbcd: This command is used to rebuild the Boot Configuration Data (BCD). BCD stores information about all available operating systems, and if this data is damaged or missing, the system may fail to recognize how to boot. This command scans all disk partitions to find bootable Windows installations and allows you to select which ones to add to the BCD store.

Step 3: The system will reboot without incident.

If Command Prompt alerts you with an Access is Denied error, rest assured that you can effectively resolve this issue by following the troubleshooting guide in this tutorial:

Got a 'Bootrec /Fixboot Access is Denied' Error? Solutions Here

What to do when you receive the "bootrec /fixboot access is denied" error message in CMD? This post offers all possible solutions to fix the [bootrec /fixboot access is denied] issue in Windows 10/8/7.

Fix 5: Run the Sfc /scannow command

This command repairs all system files to allow for a clean boot, and is most commonly used when you see a message that the System Restore failed on the screen.

Step 1: Restart your computer and open the Command Prompt from the Advanced Options menu.

Type bcdedit at the Command Prompt, and press Enter to find the partition where Windows is installed.

Step 3: Type in sfc /scannow /offbootdir=d:\ /offwindir=d:\windows and press Enter to repair corrupted files. Make sure to replace "d:" with the letter of your drive that contains the Windows system.

When you restart your computer, the operating system should load smoothly with no pauses.

Fix 6: Disable Early Launch Anti-Malware Protection

People often use anti-malware software like Total AV to protect their data from malicious attacks. However, sometimes this software can trigger an automatic startup repair loop, causing the system to restart continuously without being able to run properly. In such a situation, you should disable Early Startup Malware Protection following these steps:

Step 1: Restart the system.

Step 2: Select Troubleshoot > Advanced options > Startup Settings.

Step 3: Press 8 or F8 to choose “Disable early launch anti-malware protection” from the available options.

<B>Step 4:</B> Restart your computer.

If you'd like to use Total AV to scan for malware or viruses, you can download it here.

Please provide the English content you want translated, and I'll translate it into Chinese for you as soon as possible.

TOTALAV

TotalAV is an award-winning antivirus and security software that provides real-time protection against viruses, malware, and online threats.

 Get Protected Now

Enable Antivirus Protection

Fix 7: Delete the problematic file

During the boot process, a problematic file is one that fails to execute the required commands. These files might be corrupted due to flaws in their creation or a virus. In any case, they prevent the boot repair feature from running.

Here's how to delete those files.

Step one: Open the Command Prompt and type cd C:\Windows\System32\LogFiles\Srt and SrtTrail.txt.

Step 2: You will see that the boot critical file c:\windows\system32\drivers\tmel.sys is corrupted.

Step 3: Type “cd c: \windows\system32\drivers” and then “del vsock.sys.” The file will be deleted.

Step 4: Restart the system and see what happens.

Fix 8: Perform a Reset

You can use System Restore to fix any boot issues. This will return your device to its factory settings, without any damaged files or malware problems. Here's how:

Step 1: Go to "Advanced options" and choose "System Restore".

Step 2: Choose a restore point and click Next.

Step Three: When that's done, restart your computer again.

Restart your computer again.

However, when it does this, the system removes files, apps, updates, and drivers installed on the device. So, you should always back up important files and applications before choosing to restore. This way, you can add and install your data again on the same device.

Additional Tip: How to Backup Your Computer to Prevent Data Loss

While going through the content on initializing repair solutions, you might have noticed that all these issues are caused by corrupted files, malware attacks, and viruses. We must acknowledge that digital data is vulnerable to such malicious strikes. To prevent this, it's always advisable to have a backup to revert your data to its original state.

There are many backup software options available, but when it comes to speed and accuracy in data recovery, Todo Backup stands out. This backup software has been used by over 20 million people across 160 countries for its one-click backup feature and instant recovery options. It is compatible with Windows 11/10/8/7.

Todo Backup Home is a versatile backup and recovery tool for Windows 11/10/8/7. It enables you to back up your files, system, disks, and partitions, and also create a system image of Windows 10 on an external hard drive for restoration purposes. Additionally, it allows you to create ISO image files of your operating system as well as create an image of an SD card.

Main features of the Todo Backup tool:

You might want to download and run the Todo Backup tool to eliminate worries about data loss.

Here are the steps to back up your computer:

Step 1: Launch Todo Backup on your computer and click “Create Backup” on the main interface, then hit the big question mark to select what you need to back up.

Step 2: To back up the Windows operating system, click "OS" to start the backup job.

Step 3: Windows will automatically select the operating system, along with all system-related files and partitions, so you don't need to make any manual selections here. Next, click on the area highlighted in the image below to choose where you want to save your System Image Backup.

System Backup

Step 4: The backup location can be another local drive on your computer, an external hard drive, a network, the cloud, or a NAS. We generally recommend using an external physical drive or the cloud to store your system image files.

Step 5: If you want, click on Options to customize settings like scheduling automatic backups (daily, weekly, monthly, or event-based), and incremental and differential backups. Then hit "Back up Now" and the Windows system backup will start. The completed task will be displayed as a card on the left side.

In summary

That's all about how to fix the Windows 10 Startup Repair not working issue. Windows Automatic Startup is a crucial feature that addresses any problems related to OS booting. However, sometimes the repair function may fail to work, preventing your system from starting up. This could be due to corrupted, deleted, or misconfigured files, or as a result of a malware attack or virus. While the issue persists, you won't be able to access or use your system.

This blog will walk you through 8 quick fixes for the Windows 10 Startup Repair issue. Each fix is detailed with step-by-step instructions and screenshots. Read on and try these methods, and you'll never dread Startup Repair again.

To keep your computer safe and ensure the security of your data, you can use the Todo Backup tool for backup. It's a practical backup solution suitable for all computer users. Download and try it out to discover more options.

You can share this message on social media to help others understand how to fix the issue with Windows 10 Startup Repair not working.

Frequently Asked Questions about Windows 10 Startup Repair not working

Why won't my Windows 10 start?

There can be multiple reasons why Windows 10 fails to start, including incorrect boot order in the BIOS, corruption of the operating system, damage to the system disk, deleted files, a malware attack, or a system crash.

2. Will a clean install delete all files?

Yes, a clean install will remove everything except the operating system. Any files, applications, or drivers that were previously installed will be erased during the process of formatting the hard drive. Therefore, it's essential to back up your data before proceeding with a clean install to prevent loss.

How do I know if my Windows 10 operating system is corrupted?

To do this, open the Command Prompt window and type in sfc /scannow, then press Enter. The built-in System File Checker utility will scan your Windows system files for integrity and fix them if needed. When done, restart your system.

What if Automatic Repair can't fix your PC?

If the automatic repair doesn't work, you can try disabling auto-restart, running the chkdsk command, starting in Safe Mode, rebuilding BCD, running the sfc /scannow command, disabling Early Launch Anti-Malware Protection, and resetting your system. We've provided steps for all these methods.