User Manual | Clone NVMe SSD to NVMe SSD

NVMe is an SSD protocol designed specifically to connect storage over a PCI Express (PCIe) slot to the system CPU. NVMe SSDs have significant advantages over SATA SSDs, HDDs, USB flash drives, and so on.

To summarize the key differences between NVMe SSD and regular SSD, the NVMe protocol excels in connectivity, speed, and efficiency compared to traditional SSDs. This article, brought to you by Tool, will show you how to clone NVMe SSD to NVMe SSD.

Before diving into the details of this subject, let's first look at what you need to prepare.

Click here to download this excellent disk cloning software.

Why Clone NVMe to NVMe SSD?

An NVMe SSD is a type of solid-state drive that revolutionizes storage technology by delivering significantly faster data transfer speeds and overall performance compared to SATA SSDs and traditional HDDs.

You might be wondering: Can I clone NVMe to NVMe SSD? Or, since NVMe SSDs come in various sizes, can I clone the original NVMe SSD to a larger NVMe SSD? The answer is yes. You can clone NVMe SSDs of different sizes.

One of the main reasons users clone an SSD is to increase storage capacity. NVMe SSDs come in various sizes. In many cases, users might require more storage space to achieve optimal performance.

Another reason is that cloning an NVMe SSD to another, larger NVMe SSD drive means backing up files or transferring data to another drive. NVMe SSD cloning is an excellent way to protect vital data and operating systems and a fast way to transfer files.

If you need to clone an NVMe or M.2 SSD on a laptop with only one slot, you may refer to the following article for assistance.

Please provide the English content you want to translate, and I'll translate it into Chinese for you as soon as possible.

How to Clone M.2 SSD with Only One Slot Available

Most laptops nowadays come with an M.2 slot for SSDs. If you want to clone one M.2 SSD to another, you'll need two M.2 slots. Here we'll show you how to clone an M.2 SSD with only one slot available. Read More >>

What is required for an NVMe-to-NVMe clone?

Since an NVMe SSD is a new type of SSD different from a SATA SSD, some extra work is required before cloning can be successfully performed. Here's what you need to prepare.

● A new computer with hardware that supports Skylake or a later chipset (though NVMe is compatible with older machines)
● An M.2 PCI-E x4 slot
● UEFI firmware and a UEFI boot mode

If you've already run an operating system on an NVMe SSD, you can skip the prerequisites and pay attention only to these two points:

• An NVMe M.2 slot. If you have only one NVMe M.2 slot, you have two SSD migration options: clone to a second drive using an M.2 to PCIe adapter, then use backup and restore for the migration. • NVMe SSD cloning software. The software should be an all-in-one tool with features for different cloning scenarios.

The most important tool you need is an NVMe SSD cloning software because Windows doesn't come with built-in cloning functionality. We recommend AOMEI Backupper Standard to clone your NVMe SSD. Since Windows doesn't have a built-in cloning feature, relying on third-party software to clone an SSD is crucial.

Disk Copy has a clean and straightforward interface that users can easily understand after installation. It enables you to clone Windows from an HDD to an SSD or SSD to SSD, as well as from an HDD to an M.2 SSD. Moreover, it allows you to reinstall Windows after changing the hard drive.

Cloning an NVMe SSD is similar to cloning a computer hard drive to a target NVMe SSD. The entire process lets you retain Windows without reinstallation and keeps your data safe.

If you enjoyed this article, please share it on your social media platforms to help more people see it.

How to clone from one NVMe to another NVMe SSD using Disk Copy tool? To clone data from one NVMe solid-state drive (NVMe SSD) to another using a Disk Copy tool, follow these steps: 1. **Prepare tools and devices**: - Two NVMe SSDs: the source SSD (with data) and the target SSD (for cloning). - A computer or motherboard that supports NVMe, along with necessary connection cables. - Choose a reliable disk cloning software like Clonezilla, Acronis True Image, or macOS's Disk Utility. 2. **Backup important data**: Before starting, ensure you've backed up all crucial data on the source NVMe SSD in case of any unforeseen issues. 3. **Connect the NVMe SSDs**: Insert both NVMe SSDs into your computer's M.2 slots or connect them via adapters to PCIe slots. Make sure your computer recognizes both drives. 4. **Launch the cloning software**: Depending on the software you choose, start the respective program. Here's an example using Clonezilla: - Download and create a Clonezilla Live USB/DVD. - Boot your computer into the Clonezilla Live environment. 5. **Select source and target disks**: In the Clonezilla interface, follow the prompts to choose the source disk (the data-containing NVMe SSD) and the target disk (the empty NVMe SSD). 6. **Begin the cloning process**: Choose the cloning mode, typically "device-device." Confirm the order of the source and target disks and initiate the cloning process. 7. **Wait for the cloning to complete**: The cloning may take some time, depending on the size and speed of the source SSD. Be patient and do not interrupt power during the process. 8. **Verify the clone**: After cloning is done, reboot your computer and check if the target SSD reads data correctly. Use a disk verification tool to ensure all files and the system are fully copied. 9. **Replace the original SSD**: If the target SSD is meant as a replacement, once you confirm it works properly, safely remove the source NVMe SSD from your computer. Note that the interfaces and options may vary between different cloning software, so adjust accordingly based on the specific software you use. Always back up essential data before operations and follow official software guides.

It's time to clone your NVMe SSD. Download the Disk Copy utility from the button below, and follow the wizard to clone the NVMe drive to your target disk.

Note: Use Disk Utility for smooth disk copying or cloning operations.

Step 1: Download, install, and run the Disk Copy tool on your computer. Click on the Disk Mode, select the source disk that you want to copy or clone, and then click Next to proceed.

Note: If you want to copy or clone the source disk sector by sector, the target disk should be the same size as, or larger than, the source disk.

Step 2: Select the target disk to which you want to clone/copy your old hard drive, then click "Next" to proceed.
If prompted to erase data on the target disk, click "OK" to confirm.

Step 3. Review and edit the disk layout, selecting either "Resize partitions automatically," "Match source," or "Customize disk layout." It is recommended to select "Resize partitions automatically."

The "Copy Source" option copies the partition layout from the source disk to the target disk.
The "Edit Disk Layout" allows you to manually adjust or move the partition layout on the target disk.

If your target disk is an SSD, check the “If the target is an SSD, please check this option” box.

Click Continue to start the disk cloning or disk duplication process immediately.

How to Move Operating System to Another Drive Without Reinstalling Windows?

This article will show you how to transfer operating system to new hard drive with a reliable cloning software - Disk Copy Tool, saving your time of installation and trouble.

The bottom line?

There you go! Now you know how to < strong>clone NVMe SSD to NVMe SSD</strong>. The improvements that SSDs bring benefit users in multiple ways. You can pick an NVMe SSD without having to work around any hassle. The throughput speed and low latency features of NVMe SSD make it a better choice than a standard SATA SSD. Plus, you can clone the entire contents of a storage device to a new target disk.

A hard drive cloning tool offers a straightforward process and a clean interface, providing a unique experience for cloning. If your original NVMe drive is the system drive, you can boot from the cloned SSD after the clone. The software also allows you to back up your data before initiating the cloning process.

Frequently Asked Questions About Cloning NVMe SSD to NVMe SSD

1. Will the cloned hard drive boot?

Yes, cloning your hard drive will make it bootable. Cloning a hard drive means creating an exact replica of the original disk, including the operating system, programs, and settings.

How to Migrate Windows 10 from NVMe to Another NVMe? To migrate your system from one NVMe SSD to another in Windows 10, follow these steps: 1. Backup Data: Before any migration, ensure you back up all crucial files and data to prevent accidental loss. 2. Purchase a New NVMe SSD: Buy an NVMe SSD compatible with your computer. 3. Install the New SSD: Shut down your PC, open the case, locate a PCIe slot, and install the new NVMe SSD. 4. Connect the Old SSD: Attach your old NVMe SSD to an available SATA port or use an USB-to-NVMe adapter to connect it to your computer's USB port. 5. Boot into BIOS/UEFI: Restart your computer and enter the BIOS/UEFI settings by pressing Delete, F2, F10, or another key depending on your manufacturer. 6. Set Boot Order: In the BIOS, configure the newly installed NVMe SSD as the primary boot device. 7. Install Drivers: Windows 10 might require drivers for the new NVMe SSD. Insert a USB drive containing the drivers or visit the manufacturer's website to download and install the latest drivers. 8. Use a Cloning Tool: Download and install a reliable cloning software like AOMEI Backupper, Acronis True Image, or Clonezilla. Follow the software instructions to clone the contents of the old NVMe SSD to the new SSD. 9. Verify the Clone: After cloning, disconnect the old SSD, set the new SSD as the preferred boot device in the BIOS, and restart your computer. If successful, Windows 10 should boot up and run normally. 10. Update the System: Upon booting Windows 10 on the new SSD, go to "Settings" > "Update & Security" > "Recovery," click "Reset this PC," and choose "Keep my files" to ensure the system is updated for the new hardware. Note that these steps may vary slightly depending on your computer brand and model. Refer to your computer and hardware manufacturer's documentation for specific guidance.

If you want to migrate Windows 10 from NVMe to another disk, you can use professional disk cloning software, such as the Disk Copy tool, to assist you. It allows you to move the system from one SSD to another without having to reinstall Windows.

Yeah, you absolutely can迁移data from one M.2 SSD to another M.2 SSD. Typically, folks use data transfer software or cloning tools for this. Or, if you're really tech-savvy, you can disassemble the drives and swap the storage chips, but that requires special tools and expertise. For an easy and safer method to ensure all your data moves over correctly without any losses, I'd recommend using cloning software.

Yes, you can clone from one M.2 SSD to another SATA SSD using cloning software like Disk Copy. However, you'll need to use specialist disk cloning software because Windows doesn't provide a tool to help you with this task.