Clone SSD to SSD on Windows 10 with the Best SSD Cloning Software

If your Windows 10 computer came with a small SSD, like a 256 GB SSD, it will eventually slow down over time and fill up. The best solution is to upgrade to a larger SSD rather than buy a new computer.

However, you need to point out how to install Windows 10 after replacing the SSD. Of course, you can do a clean install of Windows 10 on new hard drive from USB. Here comes a better way with tools to show you how to clone SSD to SSD Windows 10. Learn it quickly!

What do you need to clone an SSD to another SSD in Windows 10? To clone a Solid State Drive (SSD) to another SSD in the Windows 10 operating system, you will need the following tools and preparations: 1. **Two SSDs**: The source SSD (containing your current operating system and data) and the target SSD (which will receive a complete clone of the source SSD). 2. **Suitable connectors or adapters**: Ensure both SSDs can connect to your computer. This might involve SATA data cables, M.2 PCIe adapter cards, or external hard drive enclosures with Thunderbolt/USB interfaces. 3. **Disk cloning software**: You can choose from free or paid cloning tools. Some recommended options include: - `Macrium Reflect` - `Clonezilla` - `AOMEI Backupper` - Windows 10's built-in `Disk Management` (with limited functionality) 4. **Enough time**: The cloning process may take several hours, depending on the size of the source SSD and the amount of data. 5. **Backup important data**: Although data usually remains safe during cloning, it's a good idea to back up crucial files before starting. 6. **Bootable media**: If you choose cloning software that doesn't run within Windows, you might need to create a bootable USB or DVD. Here are the basic steps for cloning using Windows 10's built-in tool: 1. **Connect the SSDs**: Ensure both SSDs are correctly connected to your computer. 2. **Open Disk Management**: Press `Win + X` and select "Disk Management." 3. **Identify the SSDs**: Determine the disk numbers for the source SSD and the target SSD. 4. **Create a partition on the target SSD**: If the target SSD is new, create a partition of the same size as the source SSD. 5. **Start the cloning process**: Right-click the source SSD, select "Copy Disk" or "Clone," and follow the wizard's instructions. Note that Windows 10's built-in tool may not offer direct cloning, so third-party software might be needed. 6. **Wait for cloning to complete**: This process could take some time; do not interrupt power or shut down your computer. 7. **Verify the clone**: After cloning, check the data on the target SSD for completeness and accuracy. 8. **Set the new SSD as the boot drive**: In the BIOS/UEFI settings, set the target SSD as the preferred boot device. 9. **Restart your computer**: Your computer should boot from the new SSD, with all programs and data functioning normally. Keep in mind that different cloning software may have unique interfaces and steps, so follow the instructions provided by the chosen tool.

Before cloning an SSD to another SSD on a Windows 10 computer, there are a few preparations to make. If you're unsure what to do, check the following list to ensure a smooth process:

Sufficient storage, in the form of an SSD

To clone an SSD to a new one, you'll need an SSD that's larger than your old SSD. The Samsung 990 Pro, WD Black SN850X, and Crucial P3 are among the best SSDs available. In terms of capacity, a 500GB SSD is sufficient for future OS updates and data storage. If you have specific needs, you could opt for a larger 1TB SSD.

Backup data on the old SSD

Before cloning SSD, it's recommended to backup your SSD first. Though the cloning process is secure, there's still a risk of data loss. For this, you can use professional free backup software - Todo Backup, or the built-in backup program – Backup and Restore (Windows 7) in Windows.

Reliable SSD cloning software

Since Windows doesn't have built-in cloning settings, you'll have to look for third-party cloning utilities. At one time, Macrium Reflect and Clonezilla were among the best free SSD cloning software out there, but things have changed over time. Macrium Reflect is no longer free, and you may run into one issue or another with Clonezilla. Don't worry; you can try the Disk Copy tool, the best alternative to Clonezilla and Macrium Reflect.

⚒️A USB-to-SATA adapter

To clone two SSDs, you'll need to connect the new SSD to your computer. If your laptop only has one slot, you'll need an adapter or a hard drive enclosure to connect them. This isn't the case for desktop computers, which usually have enough space to fit two drives side-by-side. You can install the new SSD right next to your old drive.

Was this article helpful? Share it on your social platform to help others who might encounter similar issues!

How to Clone SSD to New SSD on Windows 11/10/8/7

As mentioned above, cloning SSD to another is the most direct and simplest way compared with performing a clean install of Windows 10 on a new SSD. This is because cloning makes it possible to transfer data from one SSD to another without losing data or reinstalling Windows. In this regard, disk cloning software comes in handy.

As the best SSD cloning software, it enables you to clone SSD to SSD, clone Windows 10 to a smaller SSD, or clone SSD to a larger Windows 10 SSD. It also allows you to clone SSD to a bigger SSD without data loss and clone HDD to SSD.

It also allows you to migrate data from one PC to another and quickly create a new SSD C drive. If you have issues booting your Windows computer, it can help you create a WinPE boot disk to start your PC. Some other notable features include:

As an efficient and reliable disk cloning software, Disk Copy tool enables you to easily clone HDDs/SSDs from different manufacturers. With its user-friendly interface, disk cloning can be done with just a few simple clicks. You can download it for free on your computer to help clone SSD to a new SSD. After downloading, follow these steps:

⭐ For your information: The cloning tool should detect your new SSD even if you haven't initialized it yet.

Advance notice:

• Sector-by-sector copy requires the target disk to be the same size or larger than the source disk. Uncheck this option if you want to clone a large hard drive to a smaller one. • All data on the target disk will be erased. Proceed with caution.

Step 1: To start copying/cloning an entire disk to another, select the disk in Disk Mode, then click Next.

Step 2: Select another disk as the target disk.

Step 3. Check the disk layout of both disks. You can manage the target disk's layout by selecting "Adapt to target size," "Same as source," or "Edit disk layout."

• "Optimize for target disk" makes some default modifications to the disk layout on the target disk so it runs at its best.
• "Copy as is" doesn't change anything on the target disk, and the layout will be identical to the source disk.
• "Edit disk layout" lets you manually adjust/move partitions on the target disk.

Check the “Optimize for SSD” box to ensure optimal performance from your SSD.

A warning appears, telling you that your data will be lost. Confirm this by clicking OK, and then click Next.

Step 4: Click “Proceed” to actually carry out the task.

Here's an article on how to replace your old SSD with a new one. You can read through it to learn how to upgrade your computer's SSD. Please note that the exact steps may vary slightly depending on your computer model and operating system, but the general process is similar: 1. **Backup Data**: Before any hardware swap, ensure you back up all crucial data from your old SSD. You can use an external hard drive or cloud storage service for this. 2. **Purchase New SSD**: Choose a new SSD with the appropriate capacity and interface type (e.g., SATA or NVMe) according to your needs. Make sure it's compatible with your computer. 3. **Shut Down the Computer**: Disconnect power, unplug the power cord, and ensure your computer is completely off. 4. **Access Internal Components**: Open your computer's case. This usually involves removing a few screws from the back. 5. **Remove the Old SSD**: Locate the old SSD, which might be in an M.2 slot on the motherboard or connected via a 2.5-inch SATA interface. Gently remove it as per the manufacturer's instructions. 6. **Install the New SSD**: Insert the new SSD into the same position, ensuring it's securely in place. 7. **Reconnect Power**: Verify that the SSD's power cable is correctly connected. 8. **Close the Case**: Reassemble the case and tighten the screws. 9. **System Setup**: Boot your computer, enter BIOS settings, and set the new SSD as the primary boot device. You'll likely need to reinstall the operating system, or if the new SSD supports cloning, you can use specialized software to copy data from the old SSD to the new one. 10. **Drivers and Updates**: Install all necessary drivers and ensure your operating system is up to date. 11. **Restore Data and Settings**: Recover your files, applications, and personalized settings from your backup. Once these steps are completed, your computer should be configured with the new SSD and ready for use. If you encounter issues, consult your computer or SSD manufacturer's specific guidelines or seek assistance from a professional technician.

Please provide the English content you want translated, and I'll translate it into Chinese for you as soon as possible.

How to Replace an Old SSD with a New SSD on a Windows Laptop/PC

This article discusses how to replace your old SSD with a new one without losing data using the best disk cloning tool. Read More >>

In short

This article explains in detail how to clone SSD to SSD in Windows 10. When your SSD gets low disk space warnings that may slow down its running speed, replacing it with a larger SSD will be your great option. In this regard, it's highly recommended to use a "Disk Clone" tool to clone old SSD to the new larger SSD.

As the best SSD cloning software, it allows you to replace your old small SSD with a new large SSD without reinstalling the OS or losing data in just 4 simple steps. It spares you lots of trouble when cloning OS to new SSD. Download and try it to explore its awesome cloning features!

Frequently Asked Questions About Copying SSD to SSD in Windows 10

How do I clone my SSD to a new SSD (Windows 10)?

To clone old SSD to new SSD on Windows 11/10/8/7, you can use an SSD cloning software tool like Disk Copy to help you migrate data from one SSD to another. You can follow the steps mentioned above to clone SSD to another SSD.

2. Can I clone Windows 10 to SSD without software?

Since Windows 10 doesn't have built-in cloning settings, you can't use official tools to clone your system to an SSD directly. However, you might try using the Windows Media Creation Tool to perform a clean installation of Windows 10 on your new SSD.

How do I clone my Windows 10 disk to a larger one?

To move the Windows 10 hard drive to another/larger disk, you can use a hard drive cloning software like Disk Copy tool, which helps you clone the Windows 10 drive to a larger one, making sure that everything is transferred to the target disk.

4. Is it safe to clone an SSD to another SSD?

Cloning an SSD to another SSD is 100% safe, but you need to find a reliable disk cloning tool to avoid clone failure or boot issues.