Your storage device has become RAW, thus making your important data inaccessible. You need to use a file system converter to change the file system to NTFS, FAT32, EXT2, or EXT3.

Are you looking for ways to convert the file system of your hard drive, partition, USB flash drive, or memory SD card? How can you access a storage device when its file system turns RAW? Do you need to convert the file system of your hard drive to a specific format to install a new game on your PC but don't want to lose any data? Relax! All your problems can now be resolved.

There are simple and effective ways to help you convert and change the file system of your storage device. Now, you can alter or switch the file system using any of these five methods.

## Method 1: Convert Without Losing Data to NTFS/FAT32/EXT2/EXT3

The most effective way to convert file system to FAT32/NTFS/EXT2/EXT3 is to use tools Partition Master Free, a free disk partition software running on Windows. It can convert NTFS partition to FAT32 without losing data, or convert FAT32 to NTFS as well.

    • Applicability: Windows 10/8/7
    • Supported File Systems: NTFS/FAT32
    • User Friendliness: Extremely easy for all users
    • Highlight: Data loss prevention

Here is an example of converting FAT32 to NTFS:

Step 1: Right-click on the partition of the target device and select "Advanced" > "Convert to FAT."

Step 2: Once the scan is over, click on “Start” to begin the actual conversion from NTFS to FAT32.

Step 3: Click “Apply” to save all changes.

Method 2: Format the file system to NTFS/FAT32/EXT2/EXT3

If you don't mind losing data on the partition or hard drive, you can format the disk to the file system you want, such as NTFS/FAT32/EXT2/EXT3. AOMEI Partition Assistant, a free partition manager, fully supports all Windows systems. You can use its "Format" feature to convert RAW to NTFS, NTFS to FAT32, FAT32 to EXT2, EXT3 to NTFS, exFAT to NTFS, and so on.

    • Applicability: Windows 10/8/7
    • Supported File Systems: NTFS/EXT4/EXT3/EXT2/FAT32/FAT16/FAT12/ReFS
    • User Friendliness: Very simple
    • Highlights: Supports almost all file systems

Step 1: Launch AOMEI Partition Assistant, right click the partition which you want to format and choose "Format Partition".

Step 2: In the new window, type a label for the partition, select the FAT32/EXT2/EXT3/EXT4 file system, set the cluster size as needed, and click OK.

Step 3: You'll see a warning; click “Yes” to proceed.

Hit the “Execute 1 Task(s)” button on the top left to view the changes, and then hit “Apply” to begin formatting the partition to FAT32/EXT2/EXT3/EXT4.

This is an HTML code for embedding a YouTube video. When displayed on a webpage, it will show a video player 700 pixels wide and 410 pixels tall, with the ability to play in full-screen mode. It also allows various device functionalities such as accelerometer, autoplay, clipboard write, encrypted media, gyroscope, and picture-in-picture. The video ID is "yZnBRU8hszw".

Method 3: Change file system to NTFS/FAT32/EXT2/EXT3 with Disk Management

A disk management tool allows users to format storage devices to NTFS/FAT32. If you're using an external drive, connect it to your computer.

    • Applies to: Windows 10 (steps may vary for different versions of the Windows operating system; the following applies specifically to Windows 10)
    • Supported file systems: NTFS/FAT32/exFAT
    • Difficulty level: Simple
    • Key feature: It's a built-in tool

Now you can proceed to convert the file system to NTFS/FAT32:

Step 1. Right-click on "This PC" or "My Computer" and select "Manage".

Step 2. Go to Device Manager and click on Disk Management.

Step 3. Open Disk Management, right-click on the target device, and select "Format."

Step 4: Choose the file system as “NTFS/FAT32/exFAT” for your selected device, check the “Quick Format” box, and then click “OK” to proceed.

"Convert ext3 to ntfs using disk management"

Method 4: Convert the File System Using Windows Explorer

    • Applicability: Windows 10/8/7
    • Supported File Systems: NTFS/FAT32/exFAT
    • Simplicity: Simple
    • Highlights: Extremely easy and convenient

Please format your partition to NTFS/FAT32/exFAT following these steps:

Step 1. Connect your external storage device to your computer and open File Explorer.

Step 2. Right-click on the target device and select "Format."

Step 3: Check the “Quick Format” option, set the File system to “NTFS,” and then click the “Start” button to begin the formatting process.

File System Converter - File Manager

Method 5: Convert the File System Using CMD (Command Prompt)

    • Applies to: Windows 10/8/7
    • Supported file systems: NTFS/FAT32/exFAT
    • Usability: Somewhat difficult
    • Highlight: Convenient for specific users

If you're using a USB flash drive or an SD card, plug it into your computer and follow these steps:

1. Right-click the Windows logo and select **Search**. Type **cmd**.

Step 2. Right-click on it and Run as administrator. Type diskpart and hit Enter.

Step 3. Type each of the following commands and press Enter after each one:

List disks\nSelect disk 2 (replace 2 with the number of your USB disk)\nList volumes\nSelect volume 10 (replace 10 with the volume number of the USB drive you want to format)\nQuick format fs=fat32

Convert to FAT32 using CMD

When DiskPart reports that it has successfully formatted the volume, type exit and press Enter to close it.

Other tip: Export or back up your data from the storage device first.

To avoid any potential loss of data during the file system conversion, we strongly recommend that all users back up or copy important files to a secure location or partition beforehand.

You can choose to copy your files one by one to the new disk or drive. Or, if you need to transfer a large amount of data, a professional backup program would be your best choice. Here we recommend trying the Todo Backup tool, which can back up target data directly to a compressed image format in just four steps.

Step 1: If you are backing up files for the first time with Todo Backup, click Create Backup on the main interface, and then hit the big question-mark button to choose What to backup.

Backup Step 1

Step 2. Since you're backing up files and folders on your computer, choose the "Files" backup mode. You can select images, videos, documents, and other types of files to back up.

Backup Step 2

Step 3: Browse and select the files, folders, or directories you want to back up. Click OK when done.

Backup files step 3

Step 4: Next, you need to choose a backup location to save and store the backup.

Backup Step 3

Step 5: Todo Backup allows users to save backup files to any convenient device, such as a local hard drive, external USB drive, SD card, network drive, or NAS drive, as well as to the vendor's branded cloud drive. We recommend saving important backups to a cloud drive for accessibility, flexibility, and security reasons.

Backup Step 5

To use the Tool Cloud, you just need to register with an email account and log in.

Backup files to the cloud

Step 6: If you want to set up an automatic and intelligent backup schedule for your next file backup task, proceed with the Options settings. Here, you can encrypt your sensitive file backups, compress the backup image size, or customize the backup plan to specify when the software should start the next backup.

Create an advanced and automated backup task right here:

Backup plan

Step 7. Click on "Backup Now" to start the backup process. When finished, the backup will appear as a card in the left-hand pane.

Backup file step 6

Conclusions

After getting to know the 5 ways, you'll find it the best choice to change file system with a free third-party disk partition tool. If you have the same problem, try Partition Master Free. It can convert file system to NTFS/FAT32/EXT2/EXT3, and also can convert MBR to GPT, GPT to MBR, dynamic disk to basic disk, and basic disk to dynamic disk without data loss. Install the software to explore more great features.

Frequently Asked Questions about Converting File Systems to NTFS/FAT32/EXT2/EXT3

For more questions regarding file system converters or converting to NTFS, FAT32, EXT3, or EXT4, refer to the frequently asked questions below and find the answer you're looking for:

1. What is a file system conversion?

File system conversion refers to the process of changing the file system format of a storage device, such as converting from NTFS to FAT32, between different file system formats. On a Windows computer, you can use reliable file system conversion tools like Partition Master to seamlessly switch between file systems like NTFS, FAT32, exFAT, EXT2, EXT3, and EXT4.

2. How can I convert my file system to NTFS?

    Press "Windows + E" to open File Explorer, right-click on the target storage device you want to convert to NTFS file system. Select "Format," then set the File System to NTFS, and check "Quick Format." Click "Start" and "OK" to confirm the operation.

3. How to Convert FAT32 to NTFS for Free?

    • Launch AOMEI Partition Assistant, right-click the target FAT32 volume in the "Partition Management" section. • Select "Advanced" and then choose "Convert to NTFS". • Click "OK", then "Execute Task", and finally "Apply".

Copyright © 2004 - 2024. All rights reserved.