How to Disable Write Protection on Kingston DT50 [Complete Guide]

Have you encountered the "disk is write protected" issue when trying to modify or save any data on the Kingston DT50 USB drive? Here is a real case from a tech forum:

If the answer is yes, then you've come to the right place. In this article, our tool will provide you with four reliable methods to help you remove write protection and regain full control over your USB drive's read and write functions. Plus, we'll explain the reasons behind write protection and read-only issues so that you can avoid them next time.

How to Disable Write Protection on Kingston DT50 - 4 Ways

Most USB flash drives have a physical lock switch on either side that turns the write protection feature on or off. To make your USB read and write again, you can flip the physical switch to the “off” position. However, the Kingston DT50 doesn't have a write protect switch, so we've gathered some other effective methods. Here's an overview of all the solutions that work to disable write protection on a Kingston DT50:

• Solution 1: Use a Write Protection Removal Tool
• Solution 2: Run Command Prompt
• Solution 3: Perform an Antivirus Scan
• Solution 4: Utilize the Registry Editor

Note: Back up your files before attempting this process, in case something goes wrong.

If the mentioned solutions successfully disabled the write protection on your Kingston DT50, please share this guide on social media:

Method 1: Using a Write Protection Removal Tool

Utilize the Partition Master Tool to remove write protection from your Kingston DT50 USB and give yourself a fresh start. With its free "Write Protection" tool, you can easily disable write protection on all external storage devices with ease. Furthermore, the software offers reliable technical support to help users maintain optimal hard drive performance.

Follow a simple guide to remove write protection from Kingston DT50 USB:

Step 1: Download and install Partition Master, then go to the “Toolbox” section and click on “Write Protection.”

Click on «Remove Write Protection»:

Step 2: Select your read-only USB, external hard drive, or SD card, and click Disable.

Click on «Remove Write Protection»

"The Multifunctionality of Partition Master Tool"

• Resize partitions without data loss.
• Combine partitions for free in Windows 10.
• Migrate data to a new disk or create backups with ease.
• Detect and fix bad sectors on your hard drive.

Install this all-in-one disk manager to enhance your computer experience.

Method 2: Open the Command Prompt

If your hard drive is write-protected or set to read-only, you can use the Diskpart command-line utility to remove the read-only status and make it writable. Be careful when running these commands since mistaking them could harm your hard drive or the data on it.

Step 1: Connect the Kingston DT50 USB to your computer first.

Step 2. Press the “Windows + R” keys, type cmd in the Run dialog box, and click “OK”.

Step 3: Type diskpart and press "Enter" to launch the program.

Step 4. Enter each of the following commands, pressing Enter after each one:

• **list disk** • **select disk **$** **($ represents the number of the Kingston DT50 USB flash drive you want to remove write protection from.) • **attributes disk clear readonly** • **exit** (Exit the Diskpart utility.)

Once done, plug in the Kingston DT50 USB drive to your computer and check if it's now writable. For further reading, we've also prepared some additional articles for you:

Method 3: Run an Antivirus Program

If your USB flash drive gets attacked by some unknown virus or malware, it might trigger the write protection to protect the data. Hence, you can download some effective antivirus software to fix the USB drive and disable the write protection.

Here are the quick steps:

Step 1: Download and install antivirus software from the vendor's official website onto your computer.

Step 2. Insert the read-only USB into your computer.

Step 3: Run an antivirus scan on the USB device to eliminate any viruses.

Method 4: Using the Registry Editor

The Registry Editor is an advanced program that can fix read-only and write-protected errors on USB, SD cards, or internal/external hard drives. However, the complexity increases if you use the Registry Editor to remove write protection. If you're unsure of what you're doing, you can use the user-friendly software tool Partition Master.

Plug in the read-only USB to your computer and proceed with the following guide:

Step 1. Press “Windows + R,” then type “regedit” into the Run dialog to open the Registry Editor.

Click the "Start" button, then type "regedit" into the search field and press "Enter" to open the Registry Editor.

Step 2: Type HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies, and then go to that location.

Step 3: Change the DWORD value to 0, and then check the Storage Device Policies. Click OK.

Finally, exit the Registry Editor and restart your computer to see if write protection on your Kingston DT50 USB drive has been successfully disabled.

Why is my Kingston DT50 write-protected?

The Write Protect feature on a USB Flash drive is usually used to prevent data from being accidentally deleted or modified on the drive. Below are the main reasons why a Kingston DT50 may become write protected:

Physical write protect switch: Some USB drives have a physical switch that can be moved to enable or disable write protection. If the switch is in the locked position, the drive will be set to read-only.

Malware or virus infection: Many malware or viruses enable the write protection feature on USB drives to prevent users from losing data.

File system error: An error in the file system of your USB drive can cause it to become read-only. This could be due to improper ejection, a sudden power outage, or a software bug.

Registry policy settings: In some cases, write protection can be enabled or disabled by modifying the Windows Registry Editor. An ordinary user or an administrator might deliberately use this method to restrict write access to USB drives.

Conclusions

This beginner's guide delves into the reasons behind the Kingston DT50 becoming read-only and offers four practical solutions to help users resolve this issue. Among these methods, the Partition Master tool stands out as it enables users to effortlessly disable write protection on hard drives, USB flash drives, SD cards, and more. Additionally, it boasts an user-friendly interface and other excellent features. Therefore, we highly recommend downloading this tool for a better solution:

Frequently Asked Questions on How to Disable Write Protection on Kingston DT50 USB Drive

For additional information about disabling write protection on the Kingston DT50, browse this FAQ section for the relevant content.

< strong > How do I disable the write protection on my SSD? < /strong >

There can be various reasons for the SSD write protection, so you need a versatile tool to help you remove it. AOMEI Partition Assistant can perfectly solve your problem:

Step 1: Download and install Partition Master, go to the “Tools” section, and click on “Write Protection.”

Step 2: Select the USB flash drive, external hard drive, or SD card that you want to remove the write protection from and click “Disable.”

2. How do I unlock a read-only USB flash drive?

Most USB flash drives have a physical switch that enables or disables write protection. The simplest solution is to slide the switch to the locked position. Then, reconnect the USB to your PC and check if the data is writable.

3. Can I format a read-only USB?

You can still format the read-only USB and delete its data. Here's a tutorial on how to format a write-protected USB flash drive.

Step 1. Open File Explorer, and right-click on "This PC."

Step 2. Right-click on your USB drive and select it.

Step 3: Select “Format” from the menu. Wait for the process to complete.