Acer Laptop Won't Turn On - How to Fix?

Have you encountered any of the following issues with your Acer laptop?

• Your Acer Aspire laptop frequently gets stuck during booting.
• Your Acer notebook was running and powering on without any issues a few minutes ago, but now it won't turn on.
• The blue indicator light on your laptop is lit, but it won't start up.
• You've tried plugging it into power, but it still doesn't function properly.
• It still doesn't work even after holding the power button for 15 seconds and 30 seconds.
• There's no response when you press the power button, except for side lights and beeping sounds when unplugged.
• The fan and other devices fail to turn on as well.

If your Acer laptop is facing any of the above-mentioned issues, read on the article to get assistance from the tool to fix the Acer laptop not starting problem.

How to Fix an Acer Laptop That Won't Turn On - 6 Solutions

Now, let's address the issue of an Acer laptop not turning on:

• Solution 1: Check and Remove Unnecessary Peripherals
• Solution 2: Correct BIOS Misconfiguration
• Solution 3: Use a Boot Repair Tool
• Solution 4: Hard Reboot to Drain Electricity
• Solution 5: Replace Thermal Paste
• Solution 6: Perform Battery Reset

Solution 1: Check and Remove Unnecessary Peripherals Before you begin, make sure all unrelated applications and programs are closed. Next, examine if your device has any unnecessary peripheral devices connected, such as external hard drives, USB devices, printers, or other accessories. These devices can sometimes cause system performance issues or conflicts. 1. Disconnect all non-essential USB devices and external hardware. 2. If you're using a wired network, try switching to a wireless network, or vice versa, to see if the issue persists. 3. Turn off any Bluetooth devices or wirelessly paired devices that might be running. 4. Restart your computer and reconnect the devices one by one to identify which device might be causing the problem. If the issue is resolved after removing certain devices, the problem likely lies with that device. Try updating its driver or contact the manufacturer for support. If the problem remains, proceed with the following solution.

The first thing to try is to unplug all external peripherals, including docks, hubs, and monitors.

Though it shouldn't, sometimes these peripherals are recognized as boot drives. Also, if a USB peripheral or another device is drawing too much power, the laptop might not attempt to start up at all.

Disconnect your notebook from any docks, USB devices, disk drives, or other peripherals. Leave them disconnected while you troubleshoot.

Solution 2: Correct incorrect BIOS settings

Incorrect BIOS settings can prevent your Acer laptop from booting the Windows operating system. Check the BIOS menu for any solutions:

1. To enter the BIOS, restart your Acer laptop and press the `F2` key as soon as the first logo screen appears.

Step 2 In the BIOS menu, confirm that the Boot tab is set to start the computer from the primary hard drive.

Step 3: Also, under the "Main" menu, turn off "Fast Startup."

Step 4. You can also choose Exit > Load Setup Defaults > Yes, or press F9 and Enter together, to return the BIOS to its initial configuration.

Solution 3: Use the Boot Repair tool

The 3rd solution to fix Acer laptop won't turn on is to use a third-party boot repair tool, like Partition Master Professional.

"Partition Master is a versatile disk management tool dedicated to solving all issues related to hard disks, such as conversion and damage. It aids you in addressing any issues concerning the Master Boot Record."

It provides “Rebuild MBR” and “Boot Repair” options that can be used to create a WinPE bootable disk for all Windows OS and fix errors. Therefore, with the Partition Master tool, you can resolve the Acer laptop not starting issue.

Here are the steps to fix the boot problem on Acer laptop with Partition Master as the bootable media:

Step 1: Connect the external hard drive/USB to your PC and launch Partition Master. Click “Bootable Media” and then click “Create Bootable Media.”

Create Bootable Disk from USB

Step 2: Choose the available USB drive or CD/DVD, then click Create. You can also burn the Windows ISO file to the media.

Create Bootable Disk of Partition Master Tools

Step 3. Connect the bootable drive to the new computer and press F2 or Del to enter BIOS. Set the WinPE bootable drive as the boot disk, then press F10 to exit.

Step 4. Restart your computer and enter the WinPE interface. Then, open the "Partition Master" tool and click on "Boot Repair" under "Toolbox".

Step 5: Select the system you want to fix, and click Repair.

Click on Repair your computer:

Step 6: Wait for the message that says the system was successfully repaired. Click "OK" to finish the startup repair process.

If you find your Acer computer stuck on loading screen or unresponsive after startup, this tool will be the best chance to fix the system.

Solution 4: Force a hard reset to drain the battery

Sometimes, a bad battery or charger can cause an Acer laptop to shut down. If this is the case, perform a hard reset to drain the power and check your charger for any issues. Here's how to perform a hard reset to drain the power:

Step 1. Disconnect any external devices, such as a dock, USB devices, printers, scanners, mice, keyboards, and other peripherals, from your computer.

Step 2: Open the laptop's back panel, remove the battery, and take out all the screws from the motherboard with a screwdriver. Also, unplug the AC adapter.

Step 3: Power the computer back on after holding the button down for at least 30 seconds. This will discharge any static electricity built up on the motherboard.

4. Put everything back together, plug in the power, and turn on the laptop to see if it boots normally.

Drain your laptop's battery completely, then insert the battery. Do not plug in the power cord. Try to restart your laptop. If it turns on, your laptop and battery should be working as expected. If it doesn't turn on, the power cord is likely the issue, and you should replace it.

Solution 5: Replace the thermal interface material (thermal paste)

If your Acer laptop won't turn on, it's possible that the thermal interface material (TIM) between the CPU has dried out. This prevents heat from transferring from the chip to the heatsink, causing your Acer laptop to overheat and brick itself, preventing it from turning on for hours.

Thus, replacing the thermal paste might resolve the issue of an Acer laptop not turning on. Here's how to do it:

The first step is to remove the back cover of the laptop.

Step 2: Remove the battery and unplug the power cord.

Step 3 Remove the heatsink and any cables connecting the fan to the motherboard to expose the CPU.

Step 5: Apply new thermal interface material.

Step 6: Put everything back together, and try turning on the computer to see if it boots up.

Solution 6: Perform a battery reset

Before sending it in for service, you may want to try resetting the Acer laptop battery to see if that resolves the issue:

Try resetting your laptop by inserting a paper clip straight into the battery reset hole, and holding it for 4-5 seconds.

Some Acer laptops have a battery reset button on the bottom that looks like a small pinhole. Not all laptops have this feature, however. If your laptop has a removable battery, take it out, clean both the battery and the battery compartment, then put the battery back in to see if the laptop will turn on.

Read more:

Why won't my Acer laptop turn on?

Here are several reasons why your Acer laptop might not turn on:

If you find the solutions to fix an Acer laptop that won't turn on, feel free to share this article on social media to help others out.

Conclusions

In this article, we've covered the reasons behind your Acer laptop not turning on and provided some quick fixes to help you get back up and running as soon as possible. Always remember to back up your important data to a secure location before attempting these troubleshooting steps.

If these troubleshooting steps don't resolve your issue, hardware problems might be present, and you should contact Acer Support for further assistance. In addition, you can always use the Partition Master tool and its advanced features, such as Boot Repair, to address issues with an Acer laptop not turning on.

Frequently Asked Questions on Acer Laptop Not Booting Issues with utf-8 Encoding

If you have more questions about your Acer laptop not turning on, check out this list of common issues and their solutions:

Why won't my Acer laptop turn on, but the blue light is on?

The issue of an Acer laptop screen going black but with the blue light active could potentially be due to damaged, outdated, or missing graphics card drivers. Hence, it is crucial to ensure that your drivers are up to date and properly installed.

If my Acer laptop won't turn on, how can I reset it?

If your Acer laptop won't turn on, you can reset it by force. Press and hold the power button on your Acer laptop for 10 to 30 seconds. Keep holding it until the laptop completely powers off. Now, give your laptop's system a few minutes to refresh. After that, press the power button again to check if your Acer laptop turns on correctly.

3. What is the Acer Battery Reset hole?

If your computer won't turn on, a power reset can help. This will discharge any built-up static electricity that might be preventing your computer from turning on normally. Hold down the reset button on your laptop's battery connector for four seconds to reset the power.