How to Check SSD Health on Windows 10 [Safe & Efficient Guide]

Knowing how to check SSD health is crucial for safeguarding your data. With their enhanced speed and reliability, SSDs (Solid State Drives) are increasingly replacing traditional hard drives. However, SSDs aren't invulnerable to damage or corruption. This article will steer you through the process of checking SSD health on Windows 10, ensuring the protection of both your SSD and the data it stores.

How to Check SSD Health on Windows 10 - 5 Safe and Efficient Methods

This section provides five methods to help you check SSD health on Windows 10. You can opt for third-party software or built-in tools, depending on your requirements. Among these methods, the utility Partition Master Professional is recommended if you have limited knowledge about computing. Let's proceed to learn how to use it to check SSD health on Windows 10.

Method 1: Check SSD Health on Windows 10 with Tool - Partition Master

tools Partition Master is user-friendly, thanks to its straightforward interface. It allows you to easily check SSD health with just a few clicks, accommodates all Windows versions, and boasts wide compatibility. Upon checking, the SSD's health status, temperature, total host writes, total host reads, and more will be displayed. This enables you to gain a clear understanding of your SSD's health condition. Download the tool now and follow the instructions to give it a try.

• System Supported: Windows 11/10, Windows 8.1/7, Windows XP/Vista
• Interface: Intuitive
• Operation Difficulty: Low
• Target Users: Beginners and Experienced Users

Step 1. Launch AOMEI Partition Assistant and click the blue arrow to activate the "Disk Health" feature under the "Discovery" section.

Step 2. Choose the target disk and click the "Refresh" button. You'll then see the disk's health status.

Then, you finish checking your disk with the help of tools Partition Master, and now, let's learn more features of it.

Key features of Partition Master tools:

Translate the following into English:
• Check SD card health
• Perform USB health check
• Check the health of HDD/SSD
• Split or merge partitions on SSD
• Check SSD temperature on Windows 10
• Check hard drive health on Windows 7
• Resize/delete/create/format partitions on SSD

If you're experiencing issues related to disk partitions, download it for assistance.

Method 2: Check SSD Health on Windows 10 via Command Prompt

The Command Prompt allows you to check your SSD for read and write errors, percentage, temperature, wear leveling, and various other significant details, and alerts you before your SSD experiences substantial data loss. Here's how to check SSD health on Windows 10 using CMD:

Step 1. To open a Command Prompt window, press the Windows icon key + R, type "cmd," and then press "Enter."

Step 2. Type "wmic" and press "Enter" in the new window.

Step 3. Type "diskdrive get status" and press the Enter key.

Step 4. Next, the CMD will display each drive, followed by one of two statuses:

OK - Your SSD is performing well.

Pred Fail - Your drive might fail soon.

If the status is Pred Fail, you should back up your data or clone the SSD immediately to prevent data loss.

CMD requires basic computer knowledge; therefore, use tools like Partition Master if you lack experience.

You can click the link below to check the health status of your external hard drive.

How to Check External Hard Drive Health on Windows 10/11 [Step-by-Step Guide]

How can we minimize data loss in such situations? The solution is to regularly check the health of your external hard drive. But how do you go about checking the health of an external hard drive?

Method 3: Check SSD Health on Windows 10 using PowerShell

PowerShell can retrieve all physical disks visible to any storage management provider and display the details of your SSD. To use PowerShell to check the health of your SSD, follow these steps:

Step 1. Type PowerShell in the Windows 10 search box and open it with administrator privileges.

Step 2. Next, enter the following command: Get-PhysicalDisk

Step 3. The status of your SSD will be displayed.

By the way, PowerShell is a built-in tool in Windows with numerous features. If you're interested, click here to learn more about formatting disk with PowerShell.

Method 4: Check SSD Health on Windows 10 via Windows Settings

Another easy way to check the health of your SSD is through Windows settings. However, using this method, you'll only be able to track the estimated remaining life, available spares, and temperatures.

Step 1. Press the Windows icon + I to open the Windows Settings.

Step 2. Choose Storage > Advanced storage settings > Disks & Volumes.

Step 3. Click on Properties, and you'll see the estimated remaining life, available spare capacity, and temperature details under Drive Health.

Click Properties.

How do you prefer to check SSD health on Windows 10? We'll keep providing more methods to monitor SSD status. Don't forget to share and discuss with your friends using the social buttons!

Method 5: Check SSD Health on Windows 10 using Defragment and Optimize Drives

Defragment and Optimize Drives can show the status of your SSD. It organizes the data on your SSD to help with the SSD's speed. Let's see how this works.

Step 1. Go to Instant Search from the Windows taskbar.

Step 2. Search for Defragment and Optimize Drives and open the tool.

Step 3. Under the status section, you can check the Current Status column for the SSD.

Check hard disk

Step 4. If the status says "OK," that's great. If not, click the "Optimize" button to fix it.

Here are some other links related to SSD. Click on them if you're experiencing similar issues:

Why Check SSD Health on Windows 10

Hard disk drives are progressively being supplanted by SSDs (Solid State Drives) due to their near-silent operation (no moving parts, hence no noise), significantly faster performance compared to HDDs (Hard Disk Drives), and reduced vulnerability to damage. However, SSDs have a finite lifespan, which can vary based on usage patterns. Consequently, it's crucial to monitor their health consistently. There are several reasons for conducting SSD health checks:

Here are the translations for the provided text in English:
• Check SSD health status: Checking the SSD's health status will show you its current condition, detect any bad sectors, and provide an overall assessment of its status.
• Protection from SSD failure: Conducting an SSD health check on Windows 10 should help identify the cause of the SSD failure, allowing you to address the issue.
• Optimize SSD performance: You can carry out "garbage collection" and adjust other settings to enhance the SSD's performance.
• Test SSD speed (transfer speed): An SSD health check typically includes measuring the SSD/disk transfer speed. You might uncover a problem with "slow write speed on SSD".

We recommend that you regularly check the health of your SSD, but there are certain instances when you should specifically verify the status of your SSD:

1. Saving files takes a long time 2. Your PC crashes for no reason 3. Your SSD is becoming slow 4. Most file systems are not working correctly 5. You dropped your SSD, or you spilled water on it 6. Encounter unexpected bad blocks and read-only errors

You May Also Like:

Still, the question remains: how can you perform an SSD health check on Windows 10? Don't worry; we'll present five methods in the upcoming section.

Conclusion

It's highly essential to perform a disk check for the sake of your storage device's health, which in turn helps minimize or avoid data loss and financial losses. We've emphasized the significance of regularly checking your SSD's health and presented five methods to assist you with that. You can refer to the detailed steps mentioned above to examine the health status of your SSD.

The tool Partition Master can be very helpful if you're not very experienced with computing. It can show the health status of your SSD without needing any specific commands. Download it to assist you.

"Check SSD Health on Windows 10" FAQs

The health of an SSD is crucial for everyday usage. Here, we've compiled a list of frequently asked questions regarding checking SSD health on Windows 10. Browse through the answers below for assistance.

1. How can I tell if my SSD is failing in Windows 10?

The common signs of SSD failure include:

Here are the translations of the provided phrases into English: 1. Slow running speed. 2. SSD becomes read-only. 3. Frequent blue/black screen freeze errors. 4. The application frequently freezes or crashes. 5. Your computer fails to boot, showing a "No bootable device" or "No bootable medium" error on Windows, or a flashing question mark on a Mac.

2. How do I check the speed and health of my SSD?

To check the speed and health of an SSD, follow the guide below:

Step 1. Download and launch Partition Master.

Step 2. Look for "Disk Health" under the "Discovery" section.

Step 3. Select the target disk that you wish to check.

Step 4. The verification results will display immediately.

3. How do I perform an SSD test on Windows 10?

There are various ways to test an SSD. Here are the steps you can follow:

Step 1. Press the Windows icon + I to open the Windows Settings.

Step 2. Click Storage > Advanced storage settings > Disks & Volumes.

Step 3. Click Properties, and you can see its estimated remaining life, available spare, and temperature details.