Guide to Clone SSD to NVMe SSD (with Pictures?️)

Whether you're a gamer, coder, or editor, everyone wants their computer to run as fast as possible. SSDs proved to be a significant leap toward this goal thanks to their ridiculous speed compared to HDDs. Among them, NVMe SSDs are incredibly popular because they're the fastest SSDs available to consumers, outpacing SATA SSDs.

If you manage to acquire one for your setup, you should migrate your Windows OS to it for enhanced computer performance using disk cloning software. This article will guide you on how to clone Windows from SSD to NVMe.

Best Tool to Clone Windows from SSD to NVMe Recommended

You'll require a Windows cloning utility to clone Windows from SSD to NVMe. There isn't a built-in disk cloning software in Windows that allows you to clone SSD to NVMe for free. The best tool to clone Windows without any complicated procedures or issues is tools Partition Master. It's a comprehensive toolbox for hard drives and can effortlessly clone SATA SSD or clone one drive to another, including the system drive.

The process to clone Windows from SSD to NVMe is straightforward and quick with this tool. You can download and utilize the Partition Master software for free to clone your Windows.

Key features

• 4K Alignment: Even the fastest NVMe SSDs can accumulate junk data, leading to reduced computer performance. Using Partition Master, you can perform 4K Alignment on NVMe SSDs to restore their speed. This allows the drive to utilize the smallest 4K sector for data storage.

• Cluster Size Adjustment: When using Partition Master, you no longer need to format your NVMe drive to alter the cluster size. It enables you to select the desired cluster size without impacting the data on the drive.

• Wipe Partition: After you've migrated to the new NVMe SSD, you can use tools like Partition Master to securely erase the old SSD. This will permanently remove all data from the drive, ensuring that no one can access your information.

• Clone Partitions: Need to transfer data from one partition to another? With Partition Master, you can easily clone one partition to another with just a few clicks. The process is incredibly fast, and no data will be lost during the operation. Plus, you can clone Windows from an SSD to an NVMe drive for free.

Step-by-Step Guide: How to Clone Windows from SSD to NVMe SSD Easily

As mentioned above, cloning Windows from SSD to NVMe SSD is a straightforward and quick process when using tools like Partition Master. After installing this software and connecting the new NVMe SSD to your system, you can proceed with cloning Windows. Simply follow the steps below to flawlessly clone Windows from an SSD to an NVMe SSD with just a few clicks.

1. Clone Windows from SSD to NVMe SSD

If the NVMe drive is intended for another computer and you wish to clone the Windows operating system and other programs from your old computer, refer to this guide on how to clone a SATA SSD to an NVMe drive. By cloning Windows from your older machine, you can effortlessly transfer all your settings, programs, and the same operating system to the new computer. To clone Windows from an SSD to an NVMe SSD, follow these steps:

Step 1. Launch AOMEI Partition Assistant, go to the Disk Clone tab, select "Clone System Disk" and click "Next".

Select the system disk to clone, and then click Next.

Step 2. Select the target new drive where you wish to clone the OS to, and click "Next".

Select the target drive to clone OS to

Click "Yes" to confirm that you want to proceed with the OS disk cloning process.

Step 3. Review the disk layout, then click "Start" to begin the OS cloning process.

Click "Next" to continue.

Step 4. When the process is done, you'll see a confirmation message asking if you want to boot your computer from the clone target disk.

• Reboot Now means to restart your PC and set the computer to boot the operating system from the new disk immediately.
• Done means you wish to make the changes at a later time.

 

Tip: If you want the option to clone SSD to NVMe for free, you can choose to clone the partition. After the cloning is complete, please repeat the process to ensure all SSD partitions have been successfully cloned.

2. Migrate the operating system from SSD to NVMe

When it comes to copying the Windows OS from an SSD to an NVMe SSD on the same computer, follow the steps outlined in this section.

Transferring your Windows operating system to a faster drive will result in quicker boot times and improved computer responsiveness and performance. Follow these steps to migrate your OS from an SSD to an NVMe drive:

< strong > Steps to migrate OS to HDD/SSD: < /strong > 1. Backup important data: Before starting the migration process, ensure that you have backed up all your essential files and documents to an external storage device or cloud service. 2. Choose a migration tool: Select a reliable disk cloning software such as Clonezilla, Macrium Reflect, or Windows' built-in "Create a system image" feature. 3. Prepare the target drive: If you're using a new HDD or SSD, format it to the appropriate file system (e.g., NTFS for Windows, APFS for macOS). Make sure the target drive has enough space to accommodate the entire operating system and its associated files. 4. Connect the target drive: Connect the new HDD or SSD to your computer. This can be done via an external enclosure, a USB-to-SATA adapter, or directly installed in your computer's drive bay. 5. Launch the migration tool: Run the chosen disk cloning software and follow the on-screen instructions. 6. Select source and destination: In the software, specify the current OS drive (usually C:) as the source and the new HDD/SSD as the destination. 7. Start the cloning process: Initiate the clone operation. The software will copy the entire contents of the source drive, including the operating system, applications, and settings, to the target drive. 8. Wait for completion: This process may take some time, depending on the size of your data and the speed of your drives. Do not interrupt the process. 9. Boot from the new drive: Once the cloning is complete, restart your computer and enter the BIOS/UEFI settings. Change the boot order to prioritize the new HDD/SSD. 10. Verify the migration: Save any unsaved work and reboot your computer. If everything goes well, it should start from the new drive without issues. Check if all your programs, settings, and files are accessible. 11. Remove the old drive (optional): If you're satisfied with the migrated OS, you can safely remove the old drive or use it for additional storage. 12. Update the system: After the successful migration, it's recommended to update the operating system and drivers to ensure compatibility with the new hardware.

1. Launch tools Partition Master and choose "Clone" from the left panel. 2. Check "Migrate OS" and hit "Next". 3. Select the SSD or HDD as the destination disk, then click "Next". 4. Warning: The data and partitions on the target disk will be erased. Make sure you have backed up crucial data beforehand. If not, do so now. 5. Click "Yes" to proceed. 6. Preview the target disk layout, then click "Start" to initiate the OS migration to a new disk.

Click "Reboot Now" or "Done" after this to decide whether you want to restart the computer from the new disk immediately.

"Reboot Now" means to apply the changes immediately, whereas "Done" means you'll need to restart your computer manually at a later time.

Select the boot option after migrating OS to new disk

Important: The OS migration operation will delete and remove existing partitions and data on your target disk if there's insufficient unallocated space. Back up any important data to an external hard drive beforehand if necessary.

3. Make NVMe Bootable

After completing the process of cloning Windows from an SSD to an NVMe SSD, you'll need to set the new drive as the boot drive. This ensures that your computer restarts using the Windows operating system installed on the new NVMe SSD. To make the NVMe drive bootable post-cloning from a SATA SSD, follow these steps to access your computer's BIOS settings:

Step 1: After cloning the Windows OS, restart your computer and press the BIOS key to enter your system's BIOS settings. The BIOS key varies depending on the computer model and could be F10, F12, F1, F2, DEL, or Esc.

Step 2: Use the arrow keys on your keyboard to navigate to the "Boot" section in the BIOS settings. Look for the "Boot Device Priority" option or something similar.

Step 3: Next, use the "+" or "-" keys to assign the highest boot priority to your new NVMe drive. Once that's done, press "F10" to save the changes, exit the BIOS interface, and restart your system.

Set NVMe SSD as boot drive

If you enjoy this tutorial, don't forget to share it with others who might need it.

Is It Worth Cloning Windows from SSD to NVMe? Yeah, it's totally worth cloning your Windows setup from an SSD to an NVMe drive. NVMe drives are way faster when it comes to reading and writing data compared to regular SSDs, meaning you'll get a boost in system performance and a snappier computer experience. Here are some reasons why upgrading to NVMe makes sense: 1. **Faster Boot Ups:** NVMe drives have lower wait times and higher data speeds, so your computer starts up and shuts down quicker. 2. **Better App Performance:** Apps and games load in a jiffy, giving you a smoother, more efficient workflow. 3. **Increased Productivity:** Faster data access means multitasking is buttery smooth, letting you jump between projects without any lag. 4. **Up-to-Date Tech:** NVMe is the newest storage standard, so it works great with newer hardware and keeps your system future-ready. 5. **Easy Transition:** Cloning your current Windows means no need to reinstall programs, drivers, or updates – saving you time and hassle. To clone your system, you can use tools like Clonezilla, Macrium Reflect, or even Microsoft's built-in Disk Management tool. Just remember to back up your important stuff before cloning.

Yes, you should always upgrade to NVMe from an SSD if you can financially manage it and your computer is compatible. An NVMe SSD is roughly 20 times faster than a conventional SSD. It boasts an average read/write speed of 4000 MB/s, in contrast to the 400 MB/s of a regular SSD. This significant speed difference is because a standard SSD employs a SATA or SAS interface, whereas an NVMe SSD utilizes the more advanced PCIe interface.

That's why, if your computer has an NVME SSD, you should clone Windows from SSD to NVMe. This will significantly boost your system's performance and offer numerous additional advantages.

Benefits of Transitioning from SSD to NVMe

Please specify the specific language you would like translated into American English.

Final Verdict

Alright, here's the translation in American English: In short, it's advised to迁移你的Windows操作系统到新的NVMe驱动器. But, this ain't no simple task, and you need a dependable cloning tool. For this job, tools Partition Master is awesome – it lets youquickly clone Windows from SSD to NVMe or use the "Clone Partition" feature to shift SSD to NVMe for free. With this tool, you can clone Windows to a new rig or move the OS within the same computer without a hitch.

Frequently Asked Questions About Cloning Windows from SSD to NVMe

The process of cloning Windows from SSD to NVMe SSD can be perplexing. Here are some frequently asked questions and their answers related to this topic found online:

1. Why doesn't the cloned SSD boot after cloning to an NVMe drive?

The most probable reason for the newly cloned Windows OS on an NVMe SSD not booting is its low boot priority in the system. To resolve this, you need to modify the boot order in your computer's BIOS settings, assigning the NVMe drive the highest priority. This can typically be done by accessing the "Boot" settings within the BIOS menu.

2. How do you transfer the OS from an SSD to an M.2 drive?

You can easily transfer the OS from an SSD to an M2 drive using a tool like Partition Master. It's an amazing OS cloning utility that offers a straightforward method to clone a system from one drive to another. While cloning, ensure that your destination device is equal to or larger in size than the source drive.

3. Can you transfer the operating system from an SSD to an NVMe drive?

Yes, you can transfer the operating system (OS) from an SSD to an NVMe drive. To do this, you'll need a third-party utility such as tools Partition Master. This tool is reliable, secure, and offers a fast and straightforward cloning process. The software is also available for free download and use.