How to Fix Computer Stuck on Restarting | 2024 Hot Ways?

Key Takeaways:

• A Windows PC might get stuck restarting during or after an update.
• Outdated drivers, corrupted system files, and hardware issues can result in a computer taking an eternity to restart.
• This guide will offer over 10 solutions, including utilizing the best Boot repair tool, which is also effective for resolving issues with PCs stuck on "Getting Windows ready."
• Regardless of your computer brand, this guide is applicable, such as when an HP laptop is stuck on the restarting screen in Windows 10.

It can be frustrating to find yourself stuck in a loop with your computer continually restarting, and your PC taking an eternity to restart on Windows 10/11. But fear not, as this article is here to help. By following this user-friendly guide, you can quickly solve the issue of a "computer stuck on restarting."

Tools Software offers straightforward, practical advice for getting your computer back on track without emptying your wallet or encountering complex technical jargon. Whether you're dealing with a boot loop issue during or after a Windows update, this guide provides the relevant solution.

Quick Guide to Fix Computer Stuck on Restarting

Before delving into the root causes and specific solutions for why your computer is stuck in a reboot loop, try troubleshooting with these three quick steps:

1. Disconnect External Devices

Restarting a computer can sometimes be hindered by external devices such as USB drives, printers, or external hard drives. Disconnecting these devices is necessary to resolve the issue of a "computer stuck on restarting."

Step 1. Eject any linked devices, such as USB drives.

Step 2. Turn off the computer.

Step 3. Unplug any external devices and restart your computer.

If you encounter other issues while fixing your computer, such as Windows 11/10 getting stuck on "Diagnosing your PC," click the link below for more information:

How to Fix Windows Stuck on Diagnosing Your PC

Is your computer frozen on the 'Diagnosing Your PC' screen, and you're unsure how to proceed? This guide provides all the solutions for this issue on Windows 10/11.

2. Perform a Hard Reboot

A hard reboot, or a hard reset, is a method of forcefully initiating a fresh startup on your computer by cutting off the power. This can help in restarting your system and breaking the cycle of a stuck restart.

Step 1. Hold the power button for 5-10 seconds to turn off the device.

Step 2. Wait for a few seconds.

Step 3. Turn on your computer and check if it restarts without any issues.

3. Utilize the Boot Repair Tool

The Boot Repair tool proves invaluable when your computer fails to restart. It assists in resolving various hard drive and system boot problems, ensuring your system functions smoothly.

The efficient Partition Master Professional tool boasts an impressive "boot repair" feature. This utility effectively addresses issues such as blue screen errors, black screen problems, and system failures, ensuring that your system is functioning optimally once again.

Begin by downloading the tool Partition Master and follow these steps:

Step 1. Connect the USB drive/external drive to a functional computer, open tools Partition Master (RE), and click "Create Bootable Media."

Step 2. Choose the Boot Toolkits and any other components you require. Then, click "Next."

Step 3. Choose your removable device and click "Go" to create an image on your USB drive/external hard drive. You can also burn the Windows ISO file to the storage media.

Step 4. Acknowledge the warning message and wait for the creation process to finish.

Step 5. Connect the created bootable drive to the problematic computer and restart it while holding down "F2" or "Del" to enter the BIOS. Next, set the WinPE bootable drive as the primary boot device and press "F10" to exit.

Step 6. Next, the computer will enter the WinPE desktop. Open BootRepair, select the system you wish to repair, and click on "Repair."

Step 7. Wait a moment, and you will receive a notification that the system has been successfully repaired. Click "OK" to finish the boot repair process.

It's fantastic if these quick fixes have resolved your issue! However, if the problem continues, don't worry. Explore the comprehensive and advanced solutions listed below to address the problem of your computer getting stuck on the restarting loop. Additionally, the Partition Master tool can assist you in resolving other issues as well.

More Detailed Solutions to Fix Computer Stuck in Restarting Loop

This section will present 9 comprehensive remedies to address computers stuck in a boot loop. If you are aware of the specific issue causing the problem, you can directly proceed to that solution:

1. Method 1: Perform Windows Startup Repair
2. Method 2: Boot in Safe Mode
3. Method 3: Check the File System
4. Method 4: Run SFC and Check Disk Utility
5. Method 5: Run System Restore
6. Method 6: Run Windows Troubleshooter
7. Method 7: Disable Fast Startup
8. Method 8: Roll Back Drivers
9. Method 9: Perform a Clean Boot

If you find these methods useful, feel free to click on the social buttons below to share them with more people who might need them!

Method 1: Perform Windows Startup Repair

Windows provides a Startup Repair feature to assist with resolving simple unbootable issues. However, this method necessitates creating Windows 10 installation media. Follow the steps outlined below:

Step 1. Press and hold F2/F10/Delete to enter BIOS and set the Windows installation media as the first boot option.

Step 2. Boot Windows from USB and set the language, etc.

Step 3. Click on "Repair your computer."

Step 4. Under "Choose an option", click on Startup Repair to begin the automatic repair process.

Further Reading: Windows Boot Manager Not Showing in BIOS

Method 2: Boot in Safe Mode

If the previous approach didn't resolve the issue, here's another strategy for you to consider. To troubleshoot the restart problem, you can try booting your computer in Safe Mode. Follow these steps:

Step 1. When your computer restarts, press the F8 key (or Shift + F8 on some computers) during the startup process.

Step 2. The Advanced Boot Options menu will appear. Select "Safe Mode" to allow your machine to start up with minimal processes.

Method 3: Check the File System

MiniTool Partition Wizard isn't just a Windows boot repair tool. Its "Check File System" feature comes to the rescue once more. The problem of a computer getting stuck in a restart loop is often due to file system issues, and this feature helps you identify and rectify them.

To maximize the utility of this tool, follow these steps to create a bootable USB using Partition Master, and then use that USB drive to detect and repair any file system issues on your computer: 1. Download and install tools Partition Master on your computer. 2. Launch Partition Master and select the "Bootable Media" option from the top menu. 3. Choose "Create a bootable USB drive" and insert the USB flash drive you want to use. 4. Follow the on-screen instructions to complete the creation of the bootable USB. 5. Restart your computer and enter the BIOS settings by pressing the appropriate key (usually F2, F10, or Del, depending on your system). 6. Set your computer to boot from the USB drive in the Boot Priority Order or Boot Device Selection. 7. Save changes and exit the BIOS. Your computer will now boot from the USB drive. 8. Once Partition Master loads, select your hard drive and click on "Check File System" or a similar option to scan for errors. 9. The software will then detect and display any file system issues. Click on "Repair" or a corresponding button to fix the problems. 10. Wait for the repair process to finish, and then restart your computer normally. After following these steps, your computer should have its file system issues resolved.

Guide 1. Create a Bootable USB

Guide 2: Checking Disk Errors

Step 1. Right-click the problematic partition.

Step 2. Select "Advanced" > "Check File System".

Step 3. Confirm whether you want to hide the partition or not.

Step 4. In the Check File System window, select the option "Try to fix errors if found."

Step 5. Click "Start" to scan for errors on your partition.

Other functions of the tool Partition Master include:

Method 4: Run SFC and Check Disk Utility

System stability can be enhanced by utilizing the Check Disk Utility and System File Checker (SFC). These built-in tools may resolve the issue of the computer getting stuck during restart.

Step 1. Access the Command Prompt in WinRE.

Step 2. Type the command: "sfc /scannow /offbootdir=C:\ /offwindir=D:\Windows" and press Enter to start the System File Checker.

Step 3. Likewise, type the command: "chkdsk D: /R" to run the Disk Utility.

Further Reading: SFC SCAN Stuck

Method 5: Perform a System Restore

When your computer keeps restarting, System Restore can be useful. If you have System Restore set up, this method allows you to revert your PC to a point in time when it was functioning without any issues.

Step 1. In WinRE, select System Restore.

Step 2. Choose a restore point and follow the on-screen instructions.

Method 6: Run Windows Troubleshooter

Utilizing Windows Troubleshooter is a method to address the persistent issue of your computer constantly restarting. This feature aids in diagnosing various system maintenance-related problems.

Here's how to proceed:

Step 1. Press Windows + S, then type "Control Panel" and hit Enter.

Step 2. Navigate to "System and Security," then choose "Security," and subsequently "Maintenance."

Step 3. Under "Maintenance," select "Start maintenance" and follow the on-screen instructions.

Method 7: Disable Fast Startup

Fast Startup may reduce the time it takes for your computer to restart after a cold shutdown, but it can also lead to issues. If your computer is stuck in a restart loop, disabling Fast Startup might resolve the problem. Here's how to do it:

Step 1. Access the Control Panel, then choose "Hardware and Sound," followed by "Power Options," and finally "Change what the power buttons do."

Step 2. Select "Change settings that are currently available."

Step 3. Disable "Fast startup (recommended)."

Method 8: Roll Back Drivers

If you encountered restart issues after updating a device driver, you might want to attempt reverting to the previous version. Follow these steps to resolve the "computer stuck on restarting" issue by rolling back the drivers:

Step 1. Right-click the Start button and select "Device Manager."

Step 2. Right-click the device driver (like your video card) and choose "Properties."

Step 3. Under the "Driver" menu, select "Roll Back Driver."

Method 9: Perform a Clean Boot

The "Computer stuck on restarting" issue can be resolved by performing a clean boot, which helps isolate problems caused by conflicts between startup applications and third-party services.

Step 1. Type "services.msc" into the Run box, then click "OK."

Step 2. Check the "Hide all Microsoft services" box, then select "Disable all." Click "OK."

Step 3. To open Task Manager, press "Ctrl + Alt + Esc."

Step 4. Click on the "Startup" tab and disable any processes that are not related to Microsoft.

Step 5. Restart your computer to see if it boots normally. If it does, gradually reactivate startup programs and third-party services to identify the cause of the restarting issue.

Why Does My Computer Get Stuck on Restarting?

Understanding the underlying reasons for this issue is crucial, as it allows you to implement proactive remedies beforehand. This knowledge will help you not only resolve the problem but also prevent it altogether.

Here are some reasons that might cause your computer to continually restart:

• Power Failure or Obsolete Drivers
• Corrupted System Files
• Issues with the Master Boot Record (MBR)
• Safe Boot Disabled
• Hardware Issues
• Incorrect Boot Settings Configuration

Regardless of the issue that causes your Windows PC to get stuck on the restart screen, you can find an appropriate solution in this article. If you are unable to identify the root cause, you can utilize the Boot Repair function of tools like Partition Master.

Conclusion

In conclusion, this tutorial has tackled the persistent issue of a "computer stuck in a restart loop" and offered viable solutions. Equipped with this knowledge, you can now approach this problem with confidence.

Please share this guide with friends who are experiencing similar issues. To ensure your computer runs smoothly, utilize the superb features and tools of Partition Master for a more efficient solution.

Frequently Asked Questions About Computer Stuck on Restarting

If you're seeking additional information or solutions for a computer that won't restart, look no further. Here are some frequently asked questions:

1. Why does my PC take so long to restart?

An excessive number of startup items, background processes, or incomplete updates might result in a delayed restart. You can speed it up by disabling unnecessary startup items, terminating background programs, and keeping your system updates up to date.

< strong >2. What to do if Windows Update is stuck on restarting?

If Windows Update gets stuck while restarting, be patient and manually restart your computer. If you can, update your system in Safe Mode.

3. How to fix Windows 10 getting stuck on the restarting screen?

您可以强制重新启动您的电脑。

Step 1. Press and hold the power button for 5-10 seconds to turn it off, then wait a few seconds.

Step 2. Turn on your computer and check if it restarts normally.