PS5 SSD Temperature Test: Do You Need A Heatsink?

Are you looking for ways to test the temperature of your PS5 SSD? With modern games taking up considerable space, users often opt for an internal SSD to expand their storage. When playing continuously, the SSD can get quite hot. You might wonder about your PS5 SSD's temperature and consider whether you need a PS5 cooler.

Worry not. The tool will help you monitor and check the PS5 SSD temperature before analyzing the need for a PS5 cooler.

What is PS5 SSD temperature?

Understanding the temperature range of the PS5 SSD will help us monitor the health of the SSD:

• The normal operating temperature range for a solid-state drive (SSD) is typically between 86°F to 149°F or 30°C to 65°C.
• However, during gaming, SSDs can run hotter. Many gaming SSDs are designed to handle this and can usually withstand higher temperatures, with some rated up to as high as 70°C (158°F).
• Some PS5 SSDs, without a heatsink and with the cover on, may reach temperatures of over 71°C. Such high temperatures over time could potentially damage the SSD.
• If the PS5's SSD is not in use, its normal temperature should be no more than 40-50 degrees Celsius.

The temperature range for the PS5 and PC SSD might be the same with only slight variations. Next, we'll test the PS5 SSD's temperature on a PC and analyze if you need a PS5 cooler.

How to Run a PS5 SSD Temperature Test

Now that we know the normal temperature range for the PS5 SSD, let's learn how to test the PS5 SSD temperature. To accurately measure the temperature of the SSD both while in use and idle, we'll show you how to test the PS5 SSD temperature on a computer.

Tool Partition Master Free offers the most comprehensive SSD temperature testing tool. It provides a disk health feature that helps you check the health, temperature, performance, lifespan, and many other SMART statuses of your SSD. It will also alert you when the SSD temperature goes beyond the normal range, helping you prevent SSD failure beforehand.

Download this tool and follow these steps to check your PS5 SSD temperature:

Step 1. Launch Partition Master and click the blue arrow to activate the “Disk Health” feature in the “Discovery” section.

Step 2. Select the target disk and click “Refresh” button. Then you can view the hard drive's health status.

Select the target disk

Plus, this powerful tool is also one of the best for running an SSD performance test. If you need a PS host, click on the link below for more information.

After testing the PS5 SSD's temperatures, we can refer to the temperature range list to check if it's operating within normal limits during both usage and idle states. Next, we'll analyze whether you actually need an SSD cooler for your PS5. Keep reading for more details.

Additional tip: Does the PS5 SSD need a cooler?

The quick answer is: **Yes, the PS5 SSD requires a heatsink.**

Whether a PS5 SSD needs a heatsink depends on whether its temperature changes with or without a cooler.

performed quick travel and save load sequences on ten specific PS games, measuring temperatures with and without the cooler installed. They used a K-type thermocouple thermometer and a FLIR thermal camera to gauge temperatures at the rear of the PS5, taking readings at different times. Here's a rough idea of the results:

Radiator installed:

No heatsink installation required.

From this, you can conclude that your PS5 needs a cooler. Under the same conditions, the PS5 cooler can lower the SSD temperature by about 10-15 degrees Celsius. A cooler transfers heat generated by electronic or mechanical equipment to a fluid medium, which is then dissipated from the device.

If you don't have a heatsink, you'll also need to remove the expansion slot cover, as while the PS5 won't cool through this fixed cover, it will prevent hot air from escaping.

For more information on heatsinks, see: Do I need a heatsink for my M.2 SSD?

Conclusions

This article will discuss the temperature of the PS5's Solid State Drive (SSD). It's important to understand that the normal operating temperature range for the PS5 is between 30°C to 65°C. When the SSD's temperature exceeds 70°C, it's advisable to take preventive measures. While the PS5 has an efficient cooling design, additional散热 solutions are beneficial to ensure its optimal performance. You can opt for an SSD that comes with a heatsink or purchase one separately and install it yourself.

In addition, we need to monitor the temperature and health status of the PS5 SSD, which has a similar impact on both PC and PS. To get a more accurate understanding of the PS5 SSD, we recommend using the Partition Master tool to test the PS5 SSD temperature on a PC.

You may also like:

Frequently Asked Questions About PS5 SSD Temperature

There are a few more topics related to PS5 SSD temperatures in this section, so feel free to keep reading if you're interested.

How to Fix PS5 SSD Overheating Issues?

If your PS5™ console's SSD gets too hot, you might receive a temperature warning. Follow these steps to address an SSD overheating issue:

• Clean the console.
• Power off the game and PS5, remove the metal cover from the docking station, and let it cool down.
• Install a cooler made for the PS5, like the Sabrent M.2 NVMe cooler.
• Provide adequate open space around the PS5 console to aid with ventilation.

2. What is the optimal temperature for the PS5 SSD?

A normal SSD temperature ranges between 30-65 degrees Celsius. In the worst-case scenario, without a heatsink and with the PS5 SSD covered, its temperature can rise up to 71 degrees Celsius. High temperatures can affect the SSD's lifespan, so it's advisable to have a heatsink installed.

3. Do SSDs need to be cooled?

Of course, an SSD also needs cooling when it overheats. High temperatures can affect the performance and longevity of an SSD. Thus, it's crucial to keep your SSD within normal temperature ranges to protect its data and integrity.