How to Fix Windows 10 if It Crashes in Safe Mode

Safe Mode is the cornerstone of Windows troubleshooting. When your system is acting up, it's the first diagnostic tool you turn to. But what if Safe Mode itself suddenly crashes and becomes part of the problem? You might feel stuck in an annoying dilemma.

If you can relate, you're not alone! Don't worry, though. These tools will help you identify the possible causes of a Windows 10 Safe Mode crash and offer simple, workable fixes. Think of this as your troubleshooting handbook for getting back access to Safe Mode and rebooting your system. Let's get started!

Why Does Windows Crash in Safe Mode?

The irony of a Safe Mode crash is not lost on anyone. Why would your Safe Mode fail? It could be due to several factors. While corrupted Windows system files are the most likely culprit, other possibilities include hardware issues, driver problems, or a hidden infection. Let's delve into the specifics of such occurrences:

• Damaged system files: Windows relies on certain critical files to run; issues can arise if they become corrupted.
• Driver conflicts: Outdated or incompatible drivers can cause problems with your system, including this one.
• Virus or malware: Malicious software can interfere with your system and even prevent access to Safe Mode.
• Hardware issues: Unstable behavior, such as crashes in Safe Mode, can be caused by faulty hardware components like RAM or the hard drive.

Here is one possible solution. Please click on and share this article:

How to Fix Safe Mode Crash or Freeze Issues in Windows 11/10

1. Method 1: Use the Boot Repair Tool
2. Method 2: Check Your Hard Drive
3. Method 3: Perform a Windows Restore
4. Method 4: Repair Corrupted System Files
5. Method 5: Run an Antivirus Scan
6. Method 6: Repair Windows with Installation Media
7. Method 7: Update Drivers
8. Method 8: Update the Windows Operating System

To save your time, I'll provide you with an immediate solution to fix this issue. Here are the steps to boot into Safe Mode: 1. **Windows 10/11:** - Press the `Windows` key + `I` to open Settings. - Click on `Update & Security` and then select `Recovery` from the left pane. - Under the `Advanced startup` section, click on `Restart now`. - Once your PC restarts, choose `Troubleshoot` > `Advanced options` > `Startup Settings` > `Restart`. - After another restart, press the `F4` key for Safe Mode or `F5` for Safe Mode with Networking. 2. **Windows 8/8.1:** - Press `Shift` + `Refresh` on the login screen. - Click on `Troubleshoot` > `Advanced options` > `Startup Settings` > `Restart`. - On the next screen, press `F4` for Safe Mode or `F5` for Safe Mode with Networking. 3. **Windows 7/Vista/XP:** - Restart your computer and immediately press `F8` repeatedly until you see the Advanced Boot Options menu. - Select `Safe Mode` or `Safe Mode with Networking` using the arrow keys and press `Enter`. Once in Safe Mode, try to uninstall the problematic software or perform a system restore to a point before the issue occurred. If the problem persists, please let me know, and I'll be glad to assist further.

Method 1: Using Boot Repair

Corrupted boot files can cause Windows to crash frequently or not start at all. tools Partition Master Professional is a great choice for users of all skill levels, as it simplifies what can be a difficult boot repair process.

This powerful disk and partition manager does much more than simple fixes. It offers a streamlined interface and easy tools that make complicated tasks faster and less intimidating than manual troubleshooting.

Here are the steps to fix the Windows Safe Mode crash:

Step 1: Connect the external hard drive/USB to the computer, launch AOMEI Partition Assistant, select "Make Bootable Media", and then click "Create Bootable Media".

Create a Bootable Disk Wizard

Step 2. Select the available USB drive or CD/DVD, then click Create. You can also burn the Windows ISO file to the media.

Step 3. Connect the USB drive to the new computer and press F2 or Del to enter BIOS. Set the WinPE boot drive as the boot disk, then hit F10 to exit.

Step 4. Restart your computer and enter the WinPE interface. Then, open the “Partition Master” tool and click “Boot Repair” under “Toolbox”.

Step 5: Select the system you want to fix, then click Repair.

Click the "Repair your computer" button.

Step 6: Wait for a moment, and you'll receive a notification that the repair was successful. Click "OK" to finish the startup repair process.

Main features of Partition Master:

• Solving the "Your PC/Device Needs to be Repaired" issue
• Fixing failed Windows Recovery Environment services
• Resolving RunDLL errors at startup
• Addressing the issue where Windows 11 Startup Repair does not work

In addition, it provides comprehensive disk and partition management for Windows users:

Method 2: Check Your Hard Drive

If a standard disk check doesn't cut it, Partition Master offers powerful backup tools. While helpful, CHKDSK can occasionally run into issues with write protection, take too long to run, or simply fail.

AOMEI Partition Assistant Professional delivers comprehensive disk partition management and health checks. It can not only fix file system damage and effectively scan for problematic areas, but also offers practical features such as:

< strong > Step 1. < /strong> Launch Partition Master. Right-click the disk that you want to check, and then click "Surface Test."

Step 2: The operation will begin immediately, and any bad sectors will be marked in red.

Method 3: Perform a Windows Restore

If you have installed any updates recently, try running Windows Recovery. It will undo all the recent changes and revert your system to an earlier state, which might help to start the Safe Mode correctly. Let's proceed with the following instructions:

Step 1: Press the "Win + R" keys to open the Run dialog box.

Step 2: Click on the "Search box," type in rstrui, and press "Enter."

Step 3: The System Restore Wizard will appear. Click Next to continue.

Step 4: Check the box next to "Show more restore points."

Show more options

Step 5: Select an earlier restore point and revert your system to a state prior to the Safe Mode crash.

Step 6: Click "Next" to continue, and then click "Finish" to confirm your actions.

Step 7: Follow the on-screen instructions, and then restart your system.

Try to boot into Safe Mode.

Method 4: Repair Corrupted System Files

System files might be the culprit behind a Windows computer booting into Safe Mode. There are two ways to fix these files:

Option 1: Use Partition Master - The Easiest Way

If you're new and need to gain experience by working with complex CMD commands, then this is a good way. As mentioned above, the utility of Partition Master also comes in handy for fixing system files. Using its advanced features is easy – you won't have to go through a cumbersome manual process.

Step 1: Right-click the problematic target partition.

Step 2: Select Tools > Check File System.

Step 3. Choose whether to hide the partition.

Click "Start" to check for disk partition errors.

Option 2: Run the DISM and Scannow commands

To fix this, run the System File Checker and DISM commands. Here's how:

Step 1: Search for “Command Prompt.”

Step 2: Right-click the Command Prompt app and select Run as administrator.

Step 3: In the CMD window, type the following command and press Enter.

The command sfc /scannow translates to "Scan and repair system files with System File Checker." It is an inbuilt command in the Windows operating system used to verify and fix the integrity of system files.

This process may take some time; please be patient. When it's done, proceed to the next step.

Step 4: It's now time to run the DISM commands to fix system files. Type each command one at a time, and hit “Enter” after each one.

These are commands used in the Windows operating system to check and repair system images: 1. DISM /Online /Cleanup-Image /CheckHealth - This command checks the integrity of the system image and reports any potential issues. 2. DISM /Online /Cleanup-Image /ScanHealth - This command performs a more thorough scan of the system image, looking for and diagnosing damaged components. 3. DISM /Online /Cleanup-Image /RestoreHealth - If issues are detected, this command attempts to repair the system image, typically using Windows Update or system repair resources to restore it to a healthy state.

These commands will repair system files and restart your computer. Check if this has fixed the issue with Safe Mode crashing.

Method 5: Run an antivirus tool

Malware infections can sometimes lead to system crashes and other issues. It's advisable to run an antivirus scan if there is any suspicion of infection.

Option 1: Scan with the built-in antivirus software in Windows

Step 1: Search for and open Windows Security in the search bar.

"Step 2: Go to the 'Virus & threat protection' tab and run a full scan on your computer."

Option 2: Specialist Anti-Virus Tools

Please provide the English content you want translated, and I'll do my best to translate it into Chinese.

TOTALAV

TotalAV is an award-winning antivirus and security software that provides real-time protection against viruses, malware, and online threats.

 Get Protection Now

Activate Antivirus Protection

Step 1: Download the TotalAV antivirus from the official website.

Step 2: Launch your antivirus program and look for the scan option. You may see something like "Deep Scan" or "Full Scan."

Step 3: Run the scan and wait for it to finish. This may take some time, depending on the size of your hard drive.

If malware is detected during the scan, follow the instructions provided by your antivirus program to remove or quarantine it.

Method 6: Repair Windows with Media Creation Tool

Using the installation media to repair Windows is an effective way to fix the issue, if it persists. Let's proceed with the steps:

Step 1: Plug in the USB drive with the Windows installation files.

Step 2: Restart your system using the installation disc and press the appropriate key to boot from it.

Step 3: Follow the on-screen instructions, and select the "Install Now" option.

Step 4: Choose the "Repair Your Computer" option.

Step 5: Click on “Repair your computer,” then choose “Advanced options.”

Step 6: Click “Troubleshoot” and then select “Advanced options.”

Step 7: Select "Startup Repair" to begin the automatic repair process.

Method 7: Update the drivers

A Safe Mode crash might be caused by outdated or incompatible drivers. To resolve this issue, you can update your device drivers to their latest versions. Here's how:

Step 1: Search for "Device Manager" in the Windows search bar, and open the first result.

Step 2: Check each device to see if its driver needs updating.

Step 3: Right-click on it and select “Update driver.”

Step 4: Choose the option to search for the driver automatically, and Windows will look for the latest version.

If no updates are found, you're likely using the latest version. If an update is needed, visit the manufacturer's website to download the driver manually.

After updating all the drivers, restart your computer and see if the issue is resolved.

Method 8: Update Windows

In Windows 10, known issues can sometimes lead to crashes in Safe Mode. Typically, these errors can be fixed by installing the latest Windows updates. Let's see how to do that:

Step 1: Open the "Settings" menu and select "Update & Security" from the left side.

Step 2: Select the "Check for Updates" option to run the scan. The operating system will check for available updates.

Check for Windows updates

Install the available updates, and then restart the system.

Conclusion

While a Safe Mode crash can be frustrating, these solutions should help you get back on track. All the mentioned solutions are viable, but your choice depends on your preference. If you have basic computer skills or prefer a manual approach, any method will do. However, if you're new to this or want an automated solution, the Partition Master tool is a great option. It offers excellent reliability and adaptability. Additionally, if you continue to experience issues, seeking professional assistance is advisable.

Common questions about failing to start in Safe Mode.

Is there still confusion about this? Let's try to be clear:

**Why isn't Safe Mode working on my Windows 11?**

A system crash indicates a serious issue, since Safe Mode only loads the most basic components. This is like a car not being able to start at all, even in neutral, suggesting a problem with damaged files, hardware failure, or driver conflicts.

How do I switch from Windows Safe Mode to Normal Mode?

Usually, you can exit Safe Mode by simply restarting your computer. If this doesn't work, you may need to manually change your boot settings using the System Configuration tool.

How do I fix the issue of Windows not starting in Safe Mode?

This is challenging because it suggests the issue might be widespread. To address the root cause, you could try scanning for malware, restoring system data, or verifying your hardware components. If you're stuck, consulting a tech specialist might be your best option.