Fix SSD SMART Status Error [Simple Guide for 2024]

Computing devices have incorporated various mechanisms to optimize processes. Systems include different indicators and material adjustments to enhance the overall performance of a computer. SMART (Self-Monitoring, Analysis, and Reporting Technology) is a system related to computer storage devices. This article will delve into the "SMART Status Bad SSD" error.

While this is directly related to a specific SMART system, many users find themselves baffled while dealing with its operations. Let's delve into the error in detail and the solutions that this article will provide for the identified issue for the users.

Solution: SMART Status Bad, Backup and Replace Needed

When your Sony, HP, or Dell computer detects a SMART failure error and needs resetting or fixing, why not opt for automatic SMART error repair with free software?

What should I do if the SSD's SMART status is reported as bad?

After getting the basic idea about the SSD bad SMART status error, let's discuss the measures that you can take after identifying the issue. Check out the solutions that you may consider when you get the SSD with bad SMART status error on your computer.

1. Disable SMART tests in the BIOS

Disabling SMART testing in the BIOS is the first thing to consider to prevent recurring error messages. This particular error might occur randomly, causing confusion for users. Hence, it's advisable to turn off this service since it could have significant implications for overall system operations. Here's how to disable the SMART system in the BIOS: 1. Restart your computer and enter the BIOS: - Typically, press F2, Delete, or a specific key (depending on the manufacturer) during startup to access the BIOS settings. 2. Locate the SMART-related option: - Browse through different categories in the BIOS menu, such as "Storage," "Devices," "Hardware Health," or "Advanced," to find a setting related to SMART (Self-Monitoring, Analysis, and Reporting Technology). 3. Disable SMART monitoring: - Look for an option like "SMART Status" or "SMART Test" and set it to "Disabled" or "Off." - If given the choice between "Enabled" and "Disabled," select "Disabled." 4. Save changes and exit: - Follow on-screen instructions (usually by pressing F10) to save the changes and confirm exiting the BIOS setup. Your computer will restart. 5. Verify that the change took effect: - After restarting, check if you still receive SMART error warnings. If SMART is disabled, these alerts should no longer appear. Please note that disabling SMART testing may prevent you from detecting potential hard drive issues early on. The SMART system is designed to serve as an early warning system, helping users back up their data before a hard drive failure. Therefore, if you encounter SMART errors frequently, it's better to investigate the underlying cause rather than simply disabling the feature.

Step 1: Try restarting your computer and accessing the BIOS by pressing “F2” or any specific key that helps you access it during the reboot process.

Step 2: In the BIOS settings, access the “Advanced” tab and then select “SMART Settings.” Use the appropriate buttons to navigate and set the “SMART Self-Test” option to “Disabled.” Exit the BIOS mode and reboot your computer normally.

If the SMART status error persists, you will need to refer to the following guide to find the correct way of resolving it.

2. Check the SSD SMART status

A SMART Status Bad SSD error might occur and require an adequate authoritative solution to fix it. In this case, utilizing a third-party tool is the perfect pick for detecting potential issues with your storage device.

Partition Manager tool is the best choice to check and fix the SMART status of your SSD. Its Disk Health feature serves as a reliable source for managing SMART tests on your SSD. For those looking to address HDD drive issues in one go, it's recommended to download and run this software to test the SMART status of your SSD.

How to use Partition Master Tool to check SSD SMART status

We will try to understand all the steps involved in checking the SSD SMART status, with the main tool used being Partition Master:

Step 1. Launch AOMEI Partition Assistant, and click the blue arrow to activate the "Disk Health" feature in the "Discovery" section.

Step 2. Select the target disk and click on “Refresh”. Then, you will be able to view the hard drive's health status.

Select the target disk

How should the results be interpreted?

One major issue with using this third-party tool is the misinterpretation of status. If the status is not read correctly, users might end up causing severe and unprecedented consequences. Therefore, it's crucial to understand the key information provided below, which will aid in interpreting the various dynamics within the results, helping you determine the state of your storage device.

• Status: Displays the status of the storage device, which can be one of "Good," "Warning," "Failed," or "Unknown."

• Temperature: For this metric, there will be two thresholds: "good" if it's "below 60 degrees" and "bad" if it's "above 60 degrees."

• Light color: Users will receive a specific light color based on their SMART status, with “green” indicating a good result and “red” indicating a poor one.

For users who pass the test with flying colors and have a healthy SMART status, you can continue using your drive. However, if the tests fail and the SMART status is bad, it's time to replace your SSD. Proceed to the next section to successfully replace your device.

If the above tips help you to check your SSD SMART status, please feel free to share this guide to help more online friends monitor their SSD health.

3. Back up the data on the SSD and replace it with an updated and healthy hard drive.

If your storage device has issues, the SMART system might have detected a threat, and the immediate solution is data migration and disk replacement. When backing up SSD data, Todo Backup is the best tool for the job, making data backup easy and facilitating the transfer of all sorts of data from one computer to another.

After backing up your data, you'll need to proceed with replacing the old hard drive with the new one. To learn how to do this, please follow the instructions in this article:

Step 1: First, locate the M.2 slot on your computer's motherboard. This will help you determine what type of SSD you can and should connect to your computer. Also, take note of where your current hard drive or SSD is located on your computer.

Step 2: Once you've located it, remove the SSD heat sink from the logic board.

Slide the new SSD into the slot at a 45-degree angle. Inserting it straight on could damage the SSD.

Step 4: Press down on the other end of the SSD that's connected to the slot. Secure the heatsink with its screws, and you're done with the hard drive replacement.

That's it! The process for fixing the SSD S.M.A.R.T. status bad error is complete. To help others solve this problem, feel free to share this page on your social network:

"SMART Status Bad Error" 的意思是 "SMART状态错误"。SMART是Self-Monitoring, Analysis, and Reporting Technology的缩写，是一种硬盘自我监测、分析和报告的技术。当出现这个错误时，通常表示硬盘存在潜在的故障或性能问题，建议尽快备份数据并检查硬盘。

Our discussion will start with understanding the “SMART Failure Predicted on SSD” error. This particular indicator is for the SMART system that is directly connected to a computer's storage device. HDD (Hard Disk Drive) or SSD (Solid State Drive) are the direct affiliated devices of the SMART system. This specific error appears on display if a hard drive failure is detected or a problem is sensed.

SMART (Self-Monitoring, Analysis, and Reporting Technology) is a system designed in computers to allow users to assess the health and performance of their storage devices. When it detects an issue, it flags potential warnings with the connected device in your computer. One question many users might have is, what do these errors mean?

The SMART Status Bad SSD error is an early warning for any storage device connected to the system. It indicates that a particular device is about to fail, which may lead to data loss and instability in computer operations. The purpose of this error might be to safeguard the performance of your computer.

Read also: How to Bypass SSD Smart Failure.

Preventing alerts for SSD SMART status issues

Now that you know how unhealthy SMART status on an SSD works and how to fix it, let's learn some tips to prevent the issue from happening. Follow these recommendations to improve your SSD's SMART health:

<li>You should prioritize firmware updates for your SSD. These can fix performance issues with the drive.</li>

• HDD temperature is an important factor. Try to keep your computer in a cool environment or ensure good air circulation while using it to prevent overheating.

* Avoid subjecting the connected SSD drive to physical shock. This kind of damage can cause immediate data loss or damage to the drive.

• Don't power down your computer frequently to save electricity, since power fluctuations can be especially hard on SSDs.

Connected SSDs should not be overloaded with data. When they are, they automatically slow down, which can cause such issues.

Conclusions

The entire SMART system in computing devices has been thoroughly discussed above. While it is crucial for determining the health of HDDs, you might encounter an issue with SMART status bad SSD.

Thus, this article discusses all the major methods to fix various issues that occur in SSD. Besides, using Disk Health, Partition Master is considered the best way to fix issues and monitor the disk's health.

Frequently Asked Questions (FAQ) on SSD SMART Status Issues

We also outline some key considerations when dealing with a “SMART status bad SSD” issue.

1. What can cause an SSD's SMART status to become degraded?

There can be multiple reasons for an SSD drive to show a SMART status bad, including overloading of the hard disk drive, power interruptions and voltage fluctuations while the computer is running, or physical damage that can lead to fatal consequences for your SSD.

How to fix HDD S.M.A.R.T. errors?

The best way to fix an HDD SMART error on your computer is to disable the setting in your BIOS. Restart your computer and enter “Advanced Settings.” Find the “SMART Settings,” then disable “SMART Self-test.”

3. What is the SMART status of my SSD?

SMART, which stands for Self-Monitoring, Analysis, and Reporting Technology status, defines the state of a hard drive connected to a computer. It assesses the condition of the hard drive through various indicators.