How Do I Fix Windows 10 BSOD: Blue Screen of Death Error? Here Is The Guide

Work towards resolving the Windows 10 blue screen issue while gaming, during OS updates, or while using applications.

How can I resolve a blue screen issue on Windows 10? Is your computer consistently displaying a blank blue screen, or does it show the message "Your PC Ran Into a Problem and Needs to Restart" accompanied by a blue screen?

Here's a comprehensive guide for you to completely resolve this issue and restore your computer's normal functioning. Let's begin!

Error: Windows 10 BSOD | What Is the Blue Screen of Death Error

Definition: Windows 10 BSOD is an error that blocks access to the operating system, displaying a blue screen with various stop error codes, such as CRITICAL_PROCESS_DIED, VIDEO_TDR_TIMEOUT_DETECTED, etc.

Symptoms: Normally, if your computer is experiencing any of the issues listed below, you are encountering a BSOD error on the computer.

1. #1. Computers displaying a persistent Blue Screen of Death with no ability to boot into the operating system or access any files on the Windows drive.
2. #2. The blue screen is accompanied by a stop error code.

List of Common Blue Screen of Death Error Codes: 这是蓝屏死机（BSOD）常见错误代码列表：

• CRITICAL_PROCESS_DIED
• SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
• IRQL_NOT_LESS_OR_EQUAL
• VIDEO_TDR_TIMEOUT_DETECTED
• PAGE_FAULT_IN_NONPAGED_AREA
• SYSTEM_SERVICE_EXCEPTION
• DPC_WATCHDOG_VIOLATION

So, how do I fix the BSOD error on my own? Follow the subsequent section, examine the potential causes, and implement the corresponding solutions to restore your computer's normal booting and functioning.

How to Fix Unexpected Store Exception in Windows 10/11

If you've encountered unexpected or exception errors in Windows 10, try the quick solutions in this guide to resolve unexpected store exception BSOD issues.

How to Fix BSOD in Windows 10? Solutions Are Right Here

Many reasons can lead to BSOD errors. It could be any one of the listed causes:

• Defective device drivers
• BIOS misconfiguration
• Bugs in the Windows 10 update
• Outdated Windows operating system
• Hard disk corruption or insufficient space on the system disk
• Inaccurate entries in the system's registry
• Application conflict or App compatibility issue

So, how do I fix this error? Take note of the blue screen message on your computer and follow the appropriate solutions to消除这个错误立即:

Quick Fix for BSOD in Windows 10: Restart the computer > Wait for the computer to start up and check if the BSOD error disappears.

• If yes, congratulations and you can stop here.
• If not, proceed with the appropriate solutions below to promptly eliminate the BSOD from your computer.

#1. Resolve Windows 10 Blue Screen of Death During or After a Windows 10 Update

If the BSOD error occurs during installation or after a Windows 10 update, you can first boot your computer into Safe Mode and then proceed with the appropriate solutions to eliminate this error from your PC.

First, Restart Windows 10 Into Safe Mode

Step 1. Restart your device multiple times to enter the Windows Recovery Environment.

1. Press the power button for 10 seconds to shut down Windows 10.
2. Press the power button again to turn on the computer, then hold the power button for 10 seconds to turn it off.
3. Press the power button once more to turn on the computer.
4. When Windows starts, press and hold the Power button for another 10 seconds to shut it down.
5. Try to power on your computer repeatedly until Windows fully restarts and enters the Windows Recovery Environment (WinRE).

Step 2. On the Choose an option screen, follow the instructions to restart the computer:

Click "Troubleshoot" > "Advanced options" > "Startup Settings" > "Restart".

Read Also: Blue Screen of Death Error 0x000000C5

Next, fix the Windows 10 Blue Screen of Death (BSOD) in Safe Mode - 4 methods.

Once your computer starts up and enters Safe Mode, you're ready to proceed with the solutions below to fix the Windows 10 BSOD error on your own:

Fix 1: Uninstall the Recent or Latest Windows 10 Update

Step 1. Open Control Panel.

Press the Windows key + R, type "control panel" in the search box, and select "Control Panel".

Step 2. Click "Programs" > "Default Programs" > "Programs and Features".

Step 3. Click "View installed updates" on the left pane.

Step 4. Under the "Microsoft Windows" section, locate the latest Windows update, right-click on it, and select "Uninstall."

Step 5. Click "Yes" to confirm.

Step 6. Click "Restart Now" to complete the uninstallation of the Windows update.

Fix 2: Uninstall Device Drivers to Eliminate BSOD in Windows 10

Step 1. Press Windows + S, type "device manager", and select "Device Manager".

Step 2. Expand the problematic device (primarily the OS disk, etc.) that caused the BSOD error. Right-click on it and select "Uninstall" or "Uninstall device."

请注意，修复方法1和修复方法2都需要您重启计算机并进入退出安全模式以保存更改并让修改生效。

以下是退出安全模式的步骤：

Step 1. Press the Windows + R keys, type msconfig, and press Enter.

Step 2. Select "Boot tab" > "Boot options" > Uncheck the "Safe boot" box.

Step 3. Click "OK" > "Apply" to save the changes.

接下来，重新启动Windows 10计算机。

Fix 3: Extend System Drive & Perform a Clean Install of Windows 10 Update

Occasionally, the Blue Screen of Death error might be due to insufficient device storage, preventing you from installing Windows updates. To resolve this issue, you should first expand the system drive using professional partition manager software - tools Partition Master. Afterward, perform a clean installation of the Windows 10 update.

First, Extend the System Drive

Option 1. Extend the System C drive with unallocated space

1. 1. Right-click on the System C: drive and choose "Resize/Move."
2. 2. Drag the end of the system partition into the unallocated space to add it to the C: drive, then click "OK."
3. 3. Click "Execute Task" and "Apply" to perform the operations and expand the C drive.

Option 2. Extend System C drive without unallocated space This option refers to expanding the System C drive even when there is no unallocated space available. In this scenario, you would need to resize or move other partitions to make room for the extension of the C drive. This can typically be done using disk management tools or third-party software.

1. Right-click on a large partition with sufficient free space on the system disk, and select "Allocate Space." 2. At the "Allocate Space From (*) To" section, select the system drive, and drag the end of the System C drive into the unallocated space. Click "OK" to confirm. 3. Click "Execute Task." It will display the pending operations. Click "Apply" to save the changes and extend the C drive.

0:00-0:26 Extend the System Drive with Unallocated Space; 0:27-0:58 Extend the System Drive without Unallocated Space.

Next, perform a clean install or reinstall Windows 10.

请注意，清洁安装Windows会覆盖系统C驱动器和桌面上的数据。因此，如果您有宝贵的数据，请记得提前备份数据。

You can refer to Backup Utility to Back Up Data without Booting into Windows for assistance. Alternatively, if you don't mind losing the files, proceed with the steps below to install Windows 10 immediately:

Step 1. Download and install the Windows 10 installation media on an 8GB or larger USB drive.

Step 2. Connect the Windows installation media USB to your PC and restart your PC from the USB.

Press F2/F8/Del to enter BIOS > Navigate to the Boot Section > Set USB as the Boot Device.

Step 3. Once the computer starts from USB, select "Install now".

Step 4. Choose your language settings and other preferences.

Step 5. Skip entering the product key and choose "Install Windows only." Select the target device on which you want to install Windows 10.

Step 6. Follow the on-screen process to complete the Windows 10 installation.

Step 7. Re-enter the BIOS Boot menu and set the Windows 10 OS drive as the boot drive, then restart the computer.

Now, you have a freshly installed Windows OS that will run and boot normally on your computer. The Windows 10 BSOD error has been resolved.

Fix 4: Perform System Restore to Resolve BSOD in Windows 10

If you created a Windows 10 restore point before the Windows 10 update, you can also fix the BSOD error by reverting Windows 10 to its previous state via System Restore.

Here are the steps in English: 1. Identify the language to be translated. 2. Utilize a translation tool or software, such as Google Translate or DeepL. 3. Input the text that needs to be translated. 4. Select the target language, which in this case is English. 5. Review the translation provided by the tool. 6. If necessary, proofread and adjust the translation for accuracy and fluency. 7. Ensure that the translated text conveys the original meaning and context. 8. Finalize the translation. Remember, machine translations may not always be perfect, so human review is crucial for quality assurance.

Step 1. Press "Windows + R" keys and type rstrui.exe in the Run box. Hit Enter to open System Restore.

Step 2. Select "Choose a different restore point" and click "Next".

Step 3. Choose the latest Windows backup before you installed the new Windows 10 update, and click "Scan for affected programs".

This is an image link, and its content cannot be translated directly. The text within the alt attribute reads "Select Windows restore point," which describes the image. The image likely shows a step in the process of selecting a system restore point in Windows 7, where users might lose files after the restoration.

Step 4. Click "Finish" on the Confirm your restore point window.

Step 5. Finally, click "Yes" and wait for the process to finish.

All you need to do is wait for the process to complete, and then you'll have your previous version of Windows 10 back. The blue screen should no longer appear.

#2. Solve the Blue Screen of Death in Windows 10 When Running an App or Device

When you encounter the BSOD error while opening or using an application on your computer, there are three fixes you can attempt.

Fix 1: Uninstall Incompatible Apps

Step 1. Press the Windows + S keys, type 'control panel,' and select it to open.

Step 2. Click "Programs and Features", find the incompatible app, right-click it, and select "Uninstall".

Uninstall problematic programs that caused BSOD error

Step 3. Click "Yes" or "Uninstall" on the pop-up window to confirm the uninstallation.

接下来，重启电脑。

Fix 2: Update or Uninstall Device Drivers

To Update Device Drivers:

Step 1. Press the Windows + S keys, type "device manager," and then click on "Device Manager."

Step 2. Expand the Disk drives category, right-click on your OS disk drive, and select "Update Driver Software".

Step 3. Select "Search automatically for updated driver software" in the pop-up window.

Next, wait for the computer to search and install the latest driver software.

To Uninstall Device Driver:

Step 1. Open Device Manager, expand the disk drives category, right-click on the problematic disk, and choose "Uninstall".

Step 2. Wait for the process to complete, then restart your computer.

The system will automatically reinstall an updated device driver for your disk.

Fix 3: Unplug Incompatible Peripherals

The Blue Screen of Death (BSOD) error might occur when an incompatible device is connected to your computer. If you encounter the BSOD error after connecting an external hard drive, unplug it to消除这个错误.

Step 1. Plug in the connected external hard drive or USB.

Step 2. Restart your Windows 10 computer.

这个重启过程可能需要更长的时间，你只需要耐心等待即可。

Although the Windows 10 BSOD is complex, follow this guide, and you can fix it!

On this page, we explained what a Windows 10 Blue Screen of Death error is and provided a straightforward guide on what to do when the BSOD error appears in various scenarios.

Please note that the process might be slightly complex. As long as you adhere to the steps outlined above sequentially, you should successfully eliminate this error. Follow this guide to restore your computer's normal functioning.

You can even follow this video tutorial to eliminate the Windows 10 BSOD error: