Searching for Alternatives to Macrium Reflect for Cloning HDD and SSD or Migrating OS

Linda Updated on October 29, 2021 to Disk/Partition Clone | How-to Guides

Macrium Reflect primarily offers disk backup services, aiming to protect computer systems, applications, data, and hard drives by creating backup images. Additionally, it is also one of the best disk cloning software, allowing users to copy, clone, and replicate entire hard disks or selected partitions with just a few clicks.

When using MariaDB Reflect to clone a disk, users might encounter common error messages. Some of these errors come with explanations, while others do not. The following are known cloning failure errors so far.

• Macrium Reflect clone failed, disk not found
• Macrium Reflect clone failed, error 0, partition mismatch
• Macrium Reflect clone failed, unable to boot
• Macrium Reflect clone failed, error 8, write failure 55
• Macrium Reflect clone failed, error 9, cyclic redundancy check

There can be multiple reasons for the "Macrium Reflect clone failure." Here are some possible explanations: 1. Hardware issues: The target hard drive might be faulty or incompatible, causing the cloning process to fail. 2. Insufficient disk space: Both the source and target disks may not have enough available space to complete the cloning. 3. Driver or software conflicts: Other installed software or drivers might conflict with Macrium Reflect, affecting the cloning operation. 4. File system errors: The file system of the source disk could have issues, preventing proper cloning. 5. Permission problems: The user might not have sufficient permissions to perform the cloning operation. 6. Process interruption: An interruption during the cloning process, such as a power outage or forced shutdown, can lead to failure. 7. Macrium Reflect version issues: The version of Macrium Reflect you're using might have bugs or may not support specific cloning features. To address this issue, try updating Macrium Reflect to the latest version, check hardware compatibility and disk space, ensure no software conflicts exist, and attempt cloning in Safe Mode. If the problem persists, it's advisable to contact Macrium Reflect's technical support for professional assistance.

A Macrium Reflect clone failed error, usually accompanied by error 0, 6, 8, or 9, seems to be a common issue among its users. The causes for this cloning failure can be boiled down to the following:

• Loose/bad connection between two hard drives
• Too many bad sectors on the hard drive
• Antivirus interference

How to Fix Macrium Reflect Clone Failure Error

If you're a legitimate user of Macrium Reflect, try reaching out to their customer support for assistance. Make sure you're using a verified copy of Macrium Reflect and not a pirated version, or the professionals at Macrium might decline your request. However, if you're interested in troubleshooting manually, you can attempt to [1] disable all antivirus services on your computer, [2] check if your hard drive connections are loose or if your USB ports are functioning correctly, and [3] scan and repair bad sectors on your hard drive.

Despite this, one of the most effective solutions to fix the Macrium Reflect clone failure error is to use its alternative – AOMEI Backupper Standard, which offers the smoothest cloning experience for users. As the name implies, Disk Clone is specifically designed to copy a hard drive bit-by-bit, sector-by-sector, along with all its data, systems, games, apps, settings, and configurations. It has gained many positive reviews from authoritative IT websites and real users.

How to Use Macrium Reflect Alternative for Disk Cloning

Aside from looking for ways to fix Macrium Reflect cloning issues, the Disk Copy utility should always be your go-to in situations like these.

• Upgrade your hard drive to a larger or faster SSD
• Replace a failed hard drive without losing data
• Migrate the Windows operating system from one computer to another without a clean install
• Clone a hard drive for backup purposes

Advance Notice:

• Sector-by-sector clone requires the target disk to be the same size or larger than the source disk. Uncheck this option if you want to clone a larger disk to a smaller one. • All data on the target disk will be erased. Proceed with caution.

Step 1: To start copying/ cloning an entire disk to another, select the disk in Disk Mode and click Next.

Step 2. Select another disk as the target disk.

A warning message will appear, telling you that you will lose your data. Confirm this by clicking OK, then click Next.

Step 3: Check the disk layout of both source and target disks. You can choose to “Resize automatically to fit the disk,” “Keep the same as source,” or “Edit disk layout” to customize the layout of the target disk.

• "Fit to disk" adjusts the target disk layout by default for optimal performance. • "Copy from source disk" does not change anything on the target disk and the layout will be the same as the source disk. • "Edit disk layout" allows you to manually adjust/move partitions on the target disk.

Select the “Perform a check if target is SSD” option for optimal performance of your SSD.

Step 4: Click “Proceed” to actually perform the task.