BSOD After Installing SSD | Solved Without Losing Data Translation: Blue Screen of Death (BSOD) After Installing SSD | Resolved Without Data Loss

Have you encountered the Windows Blue Screen of Death (BSOD) after installing an SSD? Fear not, as this issue can be swiftly resolved! With its smooth writing, superior reading performance, and low latency, SSDs have become the top pick for PC users to install their operating system. However, users often find themselves frustrated with the BSOD after installing SSD. Potential causes for this BSOD include corrupted system files on the PC, incomplete software program installations, or a failed upgrade.

Ready to learn more about the solutions? First, we'll guide you through software that can help recover data from your BSOD-inflicted PC. Let's begin!

Recover Data with SSD Recovery Software from Your BSOD PC First Firstly, recover data using SSD Recovery Software from your Blue Screen of Death (BSOD) PC.

The Blue Screen of Death (BSOD), also referred to as the STOP Error or BSOD Error, is a warning message displayed by Windows following a critical system failure. Following this incident, the computer may cease functioning and fail to start up, rendering all stored data inaccessible. The three most frequent causes of BSOD are hardware failures, driver issues, and system crashes.

You might wonder if a blue screen appears on your laptop running Windows when it crashes and stops functioning. Incorrect! The blue screen of death is the result of a computer issue. The root cause is a system problem, manifesting as the blue screen.

Although a BSOD doesn't necessarily erase data from your PC, users often worry about potential data loss. When a BSOD occurs, you cannot access the stored data on your computer, but you can use professional recovery software like Recover Data from Crashed SSD to retrieve data from an unbootable SSD. Furthermore, if the BSOD is related to hardware or system issues, your data might be at risk. Hence, it's advisable to first focus on recovering your computer's stored files before addressing the blue screen problem. A powerful data recovery tool called tools Data Recovery Wizard can now restore files from various storage devices, including SSDs, HDDs, external hard drives, USB flash drives, SD cards, and more.

The most useful PC data retrieval tool that facilitates retrieving files from a hard drive that doesn't boot is hard drive recovery software. This tool is effective regardless of whether the data was intentionally deleted, accidentally lost, or for any other reason:

Step 1. Create a bootable disk

Launch the tool Data Recovery Wizard, choose "Crashed PC Recovery" and click "Go to Recover".

选择一个空的USB来创建可引导驱动器，然后点击“创建”。

Warning: When you create a bootable disk, the Data Recovery Wizard tool will erase all data saved on the USB drive. Back up important data beforehand.

Step 2. Boot your computer from the bootable USB drive

Connect the bootable disk to the PC that won't start up, and then alter the boot sequence in BIOS on your computer. For most users, restarting the computer and pressing F2 simultaneously to enter BIOS typically works effectively.

设置从"可移动设备"（可引导USB磁盘）启动，而不是从硬盘驱动器启动。按"F10"保存并退出。

Step 3. Recover Data from a Crashed System/PC

After booting from the Tools Data Recovery Wizard bootable disk, select the drive you wish to scan to find all your lost files. Preview and recover the files you need to a secure location.

Therefore, download this professional portable data recovery software today! If you found the information useful, kindly share this passage with your friends on social media.

Quick Fixes for BSOD After Installing an SSD

If you're ready to learn about the immediate solutions for the BSOD error after installing an SSD, here are the top 4 fixes outlined below:

⏱️Check for compatibility Translation: ⏱️Check compatibility

This BSOD error is caused by a piece of hardware not being compatible with your current Windows version. You should verify that the hardware is listed on the Windows Hardware Compatibility List. If it's not, you'll need to update the firmware for the hardware to resolve the issue.

Check cables and connections Translate the following text into English, focusing only on translation: Inspect cables and connections

如果有任何松动的连接或损坏的电缆，也可能导致蓝屏死机。如果你没有连接到网络，你可以通过进入设置，然后选择网络和互联网来进行连接。

Check power settings This translates to "Check power settings" in English.

A faulty power source can cause your Windows computer to overheat, experience lag, crash, or display the blue screen of death.

Check for malware or viruses Translation: Scan for malware or viruses

A BSOD can also occur if your PC is infected with malware or viruses. Common signs of malware in your system include the PC suddenly slowing down or malfunctioning, as well as being unable to restart or shut down properly.

< a id="3" name="3">Run Disk Check to Repair the Installed SSD Translation: Run Disk Check to repair the installed SSD.

CHKDSK is a prominent built-in disk utility for repairing and scanning disks in the Windows operating system. It can be executed from the Command Prompt to check and fix disk issues. Running a disk check on your installed SSD is safe and does not impact its performance. The steps involved are as follows:

Step 1. Move the pointer to the search box.

Step 2. Type cmd, and press the "Enter" button to open the "Command Prompt".

Step 3. Click "Run as Administrator" and log in as "Administrator".

Step 4. Press the "Enter" key after typing the command chkdsk C: /f /r /x in the Command Prompt. Remember that "C:" is the problematic SSD's drive letter. Make sure to replace it with the correct letter if it's different.

You can also utilize the Check Disk utility in Windows to fix a corrupted SSD. To do this, follow these steps: 1. Press the Windows key + X on your keyboard and select "Command Prompt (Admin)" or "Windows PowerShell (Admin)" from the menu. This will open an elevated command prompt with administrative privileges. 2. In the command prompt, type the following command, replacing "X" with the letter assigned to your SSD drive: ``` chkdsk X: /f /r ``` 3. Press Enter. If prompted, confirm that you want to schedule the check for the next restart. Windows will then scan the SSD for errors during the next boot process. 4. Restart your computer. The system will automatically run the Check Disk utility and attempt to repair any issues it finds on the SSD. 5. Once the process is complete, Windows should have fixed any corruption. Reboot your computer normally and check if the issue persists. Remember that running Check Disk may take some time, especially if your SSD contains a large amount of data. Be patient, and do not interrupt the process.

Step 1. Boot Windows using other bootable disks and open File Explorer.

Step 2. Locate the SSD, right-click on it, and select "Properties."

Step 3. Locate the Tools tab and click the "Check" button. This built-in tool will then automatically scan the SSD for you.

If you find these steps useful, share them with your friends on social media.

For SSD Installation, Enable AHCI Mode to Solve BSOD Issues

Upon successfully installing the Windows operating system, you might encounter a Blue Screen of Death (BSOD) issue when you enable the AHCI settings. Furthermore, when you change from IDE to AHCI mode and attempt to reinstall Windows, the process may become problematic and lead to errors. To resolve the BSOD after installing an SSD, follow these steps to enable AHCI mode:

Step 1. Restart your PC and press "Del" to enter the BIOS interface.

Step 2. Select "Integrated Peripherals," then "SATA RAID/AHCI Mode," and then "IDE." Finally, press "F10" to save your changes and restart your PC.

Step 3. Press the "Windows + R" keys when the PC wakes up to open the "Run" dialog box.

Step 4. Type "regedit" and press either "Enter" or "OK" to open the Registry Editor.

Step 5. Expand the entries in the left-hand panel to navigate to the following path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci

Step 6. To change the Start DWORD value from 3 to 0, double-click on it. Click "OK" to apply the modification.

Step 7. Restart your PC and change the SATA mode to AHCI. Then, press "F10" to save the alterations and restart your PC.

To Conclude

Now that you're aware of how to fix the Windows blue screen issue after installing an SSD, it's crucial to identify the underlying cause and choose the suitable solution from the list provided. These methods also address the blue screen problem that occurs post-SSD installation. The Data Recovery Wizard offers various features that can efficiently assist in retrieving your data.

SSD Installation BSOD Issue FAQs

Browse through the FAQs below to gain a better understanding of the topic:

1. Why does installing an SSD cause a Blue Screen of Death (BSOD)?

Certain parts of the SSD might malfunction due to faulty circuits or chips, which could lead to the blue screen of death on your Windows PC.

2. What is the blue screen of death on a corrupted SSD? The Blue Screen of Death (BSOD) on a corrupted Solid State Drive (SSD) refers to an error screen displayed by the operating system, typically Windows, when it encounters a critical system failure that prevents it from functioning properly. This occurs when the SSD has issues with its firmware, driver compatibility, bad sectors, or other forms of corruption. The BSOD usually displays an error message with a stop code, which can be used to diagnose and troubleshoot the underlying problem. Resolving the issue may involve updating drivers, firmware updates, running diagnostic tools, or in severe cases, replacing the SSD.

When Windows 10 fails to boot, it encounters the Blue Screen of Death (BSOD) error. This issue might occur if Winlogon.exe or Csrss.exe stops functioning properly. Several factors could contribute to the PC displaying corrupt system files as the reason for this error.

3. Can enabling AHCI mode fix the BSOD issue?

The BSOD error might be resolved by switching to AHCI (Advanced Host Controller Interface) mode, which enables more efficient communication between the computer's operating system and storage controller. This might involve altering the system BIOS or updating drivers to seamlessly transition from ATA (Advanced Technology Attachment) mode to AHCI mode.