3 Tips | Fix USB Error Code 43 in Windows 10 and Recover Data

How to fix the Code 43 error and get my storage device working again? On this page, we will provide you with a complete guide to effectively solving the USB flash drive Code 43 issue without losing any data.

Fix Error Code 43 for USB/External Hard Drive in Windows 10

Here are three quick tips to resolve Error 43:

1. 1. Reconnect the device - Unplug and replug the device, or try a different USB port.
2. 2. Try a different cable - If the cable is damaged, replace it with a new one, then reconnect the device to your computer.
3. 3. Restart your computer - Disconnect the problematic device, then restart your computer. After the restart, reconnect the device and check for any improvements.

After that, open Disk Management to see if your drive is detected. If it is, proceed to recover all your precious data with a reliable data recovery software as shown in the article on data recovery software.

If error code 43 still appears on your USB device or other device, try the four effective methods below:

Please provide the English content you would like translated, and I will do my best to translate it into Chinese.

Error: Unknown Device - Windows has stopped this device because it has reported problems. (Code 43)

If your USB flash drive or external USB drive is not recognized due to error code 43, don't worry.

"What does 'Error Code 43' mean?"

Error Code 43 is an error code in Device Manager indicating that "Windows has stopped this device because it has reported problems. (Code 43)."

What happens if you see error code 43 on your device?

When you see error code 43 with your USB device or other hardware, your device might become:

• Unable to read • Operating system reports hard drive failure • Computer fails to recognize the device • Files inaccessible, etc.

So, how to fix this error and get your drive back to work normally? In the next part, we will guide you to solve this issue effectively.

Method 1: Update Device Drivers to Fix Code 43 Unrecognized Device

If your USB device has a hardware issue, or its driver or device software is malfunctioning, try installing the latest driver for your USB drive. It's very likely that updating the device's driver will fix the Code 43 error.

Option 1: Update USB/Device Drivers

Step 1: Click on Search, type Device Manager, and then select Device Manager from the search results.

Step 2: Right-click on the troublesome device and select "Properties."

Step 3: Click on “Driver” and then select “Update Driver.”

Step 4: Click “Search automatically for updated driver software.”

Solution 2: Roll back the USB driver

If you updated the device driver before error 43 occurred, rolling back the device driver might be an option to fix the problem.

Step 1: Open Device Manager.

Step 2: Right-click the device driver, and select Properties.

Step 3: Click on “Driver” and then “Roll Back Driver.”

Method 2: Fix Code 43 Error by Reinstalling the Device Driver

Some users also reported that reinstalling the device driver fixed Error 43 in Windows 10. Try uninstalling and reinstalling your USB driver:

Step 1: Press the Windows + S keys, search for “Device Manager,” and click to open it.

Step 2: Extend the volume, right-click the failing device, and click Uninstall.

When warned that you are uninstalling a device from your system, click OK.

Step 3: In Device Manager, right-click your computer name, and then click Scan for hardware changes.

The Device Manager will scan your system and reinstall the device automatically.

Step 4. Right-click on the device and select Properties.

Step 5: In the Device Properties dialog box, on the General tab, under Device Status, you should see the message This device is working properly.

Method 3: Re-enable the Device to Fix Error Code 43

If you followed Method 2, you should be pretty familiar with Device Manager by now. To re-enable your USB, just:

< strong > Step 1. < /strong> Open Device Manager and expand Disk Drives.

Step 2. Right-click the device with the Error Code 43 and select Disable.

Step 3: Click "Yes" to confirm.

Step 4: Click on the device again, and select Enable Device.

5. Restart your computer for the changes to take effect.

After that, you can check whether the device is operating correctly.

Important: Recover Data from USB with Error Code 43 in Windows 10

As USB error code 43 may lead to the failure of Windows operating system in detecting or recognizing USB drives, making USB data inaccessible. So, it's quite necessary to learn how to recover data from an unrecognized external hard drive.

As long as your device can be detected by Disk Management, you can recover lost, inaccessible, or unreadable data from an external USB flash drive with Error Code 43.

Here, Reliable Data Recovery Wizard Professional tool can help you.

In a few minutes, you'll recover your USB data from the Code 43 error in Windows 10:

Step 1: Select the USB drive to scan

Launch the data recovery wizard, select the USB drive where you lost your important files, and hit “Scan” to begin.

Select the USB drive

Step 2: Preview and check USB Drive Data

After the scan is complete, you can use the filter options and search function to locate specific file types quickly.

Step 3: Recover Data from Flash Drive

Once the scan is complete and lost USB drive files are found, click on “ Recover ” to restore them. You should save the recovered files to a secure location on your computer instead of saving them back to the USB drive.

Conclusions

On this page, we've gathered 3 quick fixes and 3 reliable solutions to help you resolve the Code 43 error on your USB, external hard drive, or even hard disk.

In the process, we recommend that you use data recovery software to retrieve important data as soon as the device becomes detectable.

In addition, it's important to regularly back up all essential files using a third-party system backup software like Todo Backup.

"Frequently Asked Questions about 'Code 43 USB Error on Windows 10'"

If you're still having trouble, don't worry. Read these

What is the USB Code 43 issue?

You may see the following error: Windows has stopped this device because it has reported problems. (Code 43). This typically means that there is a loss of communication between the hard drive and the driver (not from Seagate, but from Windows) or that the driver has crashed.

2. What if my USB port isn't working?

Fix the issue where the USB port is not working in Windows with the solutions provided.

1. Restart your computer and reconnect your device to it.
2. Try using a different USB cable and a different USB port on your computer.
3. Check if your computer displays any error messages related to the USB port.
4. Modify your power management settings for the USB port.

3. How can I get around blocked USB ports?

Here are the steps to bypass a blocked USB port:

Click the "Start" button, then type "Device Manager." Click on "Universal Serial Bus controllers" to view the list of USB ports on your computer. Right-click each USB port, then click "Enable." If this doesn't reactivate the port, right-click each one again and select "Uninstall."