5 Ways to Fix the Blue Screen Error 0x00000133

Please provide the English content you want translated, and I'll do my best to translate it into Chinese.

Have you encountered the BSOD error 0x00000133 while starting up your system? This particular Blue Screen of Death (BSOD) error is referred to as a DPC_WATCHDOG_VIOLATION. It's a bug that has been recently encountered in Windows. Here, DPC stands for "Deferred Procedure Call," which is a mechanism in the operating system.

The Blue Screen error 0x00000133 is a common issue reported by many users. Therefore, Microsoft is actively working on resolving this particular error. Fortunately, there are a few troubleshooting methods you can try to get rid of this issue. However, understanding the possible causes leading to this error is crucial beforehand.

For example, issues with software or hardware compatibility might cause the BSOD error 0x00000133. Additionally, problems with your CPU or graphics card could be to blame. Driver issues can also lead to this error. Here, we'll discuss various methods to resolve the BSOD error 0x00000133.

How to Fix the Blue Screen Error 0x00000133 in Windows 10

Error 0x00000133 is a common Blue Screen of Death (BSoD) error in Windows 10. Fortunately, this issue is easily fixable, and you can resolve it using various methods. Check out the solutions listed here.

Important: Start in safe mode first.

Even with regular updates and error checking, Windows can still run into all sorts of issues. That's why it's often helpful to boot your system into Safe Mode. Curious about Safe Mode?

Safe Mode is a built-in diagnostic mode in Windows that provides you with a basic Windows state, loading only a minimal number of drivers and files. Checking for issues in this mode can help you determine the root cause. Additionally, it makes troubleshooting easier.

There are three different safe modes, and you can choose the one that best suits your needs. It's worth noting that a system_service_exception error can lead to boot issues. Hence, it's necessary to enter Safe Mode for checking and resolving the problem. You can apply the fixes listed in the Safe Mode article below.

Fix list:

1. Change SATA AHCI Controller Driver 2. Roll Back the Driver 3. Repair System Files with SFC 4. Run Disk Check/Repair 5. Restore Windows 10

Fix 1: Change the SATA AHCI controller driver

The DPC_WATCHDOG_VIOLATION error in Windows 10 can be caused by the SATA AHCI driver. In this case, changing the SATA AHCI controller driver might resolve the issue.

Please see the steps you need to follow –

1. Hold down the Windows key + R at the same time. This will open the "Run" dialog box. Type in devmgmt.msc, then click the OK button.

Step 2: This opens the "Device Manager." Expand the "IDE ATA/ATAPI Controllers" option. Click on the SATA AHCI Controller.

Step 3: Now, click on “Update Driver.” This will prompt a dialogue box. Here, you need to click on “Search automatically for updated driver software.” Alternatively, you can also choose “Browse my computer for driver software.”

4. Click “Browse my computer for driver software.” Click “Next.” Select “Standard SATA AHCI Controller.” Click “Next.” Wait for the process to complete. Restart your system and check if the error has been resolved.

Solution 2: Roll back the driver

Have you recently checked for any available updates on your computer's drivers? If you have, ensure that the updated versions are compatible with your system. Incompatibility can often lead to a Blue Screen of Death error 0x00000133.

What to do if the latest driver version is not compatible with your current system? The only solution to this problem is to roll back the driver. Rolling back means getting an earlier version of the driver. To do this, you need to follow these steps:

Step 1: Press Windows + R at the same time. This will open the "Run" dialog box. Type in devmgmt.msc, then click OK to open the Device Manager.

Step 2: Next, select "Display adapters." Right-click on this option and choose Properties. Go to the Driver tab. Here, you will need to select Roll Back Driver.

Step 3: Click OK. Restart your computer and check if the error still occurs.

Fix 3: Repair System Files with SFC

You might not know it, but corrupted or missing system files can also cause a blue screen error. You can run the SFC (System File Checker), an excellent command-line tool that helps identify and fix corrupted or missing files in your system. This utility command can resolve various issues within the operating system.

To run the SFC command, follow these steps:

Step 1: Press Windows + R simultaneously to open the "Run" dialog box. Type cmd in the field, then press Shift + Ctrl + Enter to open the Command Prompt with administrator privileges.

Step 2: Type sfc /scannow in the Command Prompt window, and then press Enter on your keyboard. Wait for the message "Verification 100% complete."

Step 3: Close the Command Prompt window, and restart your system. Check to see if the problem is resolved.

Fix 4: Run a disk check/repair

Sometimes, the blue screen error 0x00000133 can be caused by a damaged hard drive. In this case, you can use the Disk Check tool or chkdsk.exe. It's an excellent Windows utility that checks for potential issues with your hard disk and fixes them.

Here are the steps you can follow to check or repair your disk:

Step 1: Press Windows + R simultaneously to open the "Run" dialog box. Type cmd in the box, then press Shift+Ctrl+Enter to open Command Prompt with administrator privileges.

Step 2: Type chkdsk x: /f in the Command Prompt window, where "x" is the letter of the drive you want to scan. Press Enter.

Step 3: Type Y and wait for the scan to finish. When it's done, reboot the system.

Note: Please keep in mind that the scanning and fixing process can take a long time. Therefore, schedule this task for a time when you will not need to use your computer.

Fix 5: Recover Windows 10

Lastly, if none of the above methods could fix the 0x00000133 blue screen error, you could resort to system restore. Please note that system restore will roll back software and drivers. You'll be returned to a previous state of the operating system and might miss out on some latest updates and files. Thus, it's recommended to back up your personal files before choosing the Windows 10 system restore process.

The steps below will guide you through the process of recovering Windows 10:

Step 1: Press the Windows key + Pause keys at the same time. Choose 'System Properties'. Now, click on the 'System Restore' button.

Step 2: Click “Next.” Choose a specific restore point. This means you'll have to select a particular date and time. Click “Next” when done.

Step 3: Follow the on-screen instructions. Restart your system and check if the 0x00000133 BSOD error still appears.

How can I recover data from a computer that won't start?

Are you facing any difficulty in fetching the data? Are you having any problem accessing your computer? Have you lost your important data while choosing Windows recovery? Well, all these problems have a simple solution.

If you encounter boot issues and wish to recover data, you can opt for a reliable data recovery software like the Data Recovery Wizard tool. It's an excellent choice for easily retrieving deleted or lost data.

When your operating system encounters issues that lead to a crash or failure to boot, you can use the Data Recovery Wizard with bootable media. It's specifically designed to help you recover data after a system crash. With this tool, you can access lost files when there's a problem with system startup.

In addition, the software creates bootable media that enables the operating system to run. This makes it easy to recover lost data.

Another unique feature is the ability to preview data (audio files, photos, etc.) before recovery. Check what you're going to restore and then start the recovery process.

Step 1: Create a Bootable Disk

Launch Data Recovery Wizard, select “Crashed PC Recovery” and click Recover.

Select “Crashed PC Recovery”.

Select an empty USB drive to create the bootable drive, then click “Create.”

Warning: When creating a bootable disk, tools Data Recovery Wizard will wipe out all the data saved on your USB device. Please back up important data in advance.

Step 2: Boot your computer from the bootable USB drive

Connect the bootable disk to the unbootable computer, and change the computer's boot order in BIOS. For most users, this will involve restarting the computer and pressing F2 to enter BIOS while it's booting up.

Set the “Boot Order” to boot from the “Removable Device” (the bootable USB drive) instead of the hard drive. Press “F10” to save and exit.

Restart from the bootable USB

Step 3: Recover data from the crashed system/computer

Launch the tool - Data Recovery Wizard from the bootable media. Select the drive you wish to scan for all lost files. Preview and recover the required files to a secure location.

Conclusions

The Blue Screen error 0x00000133 is a common issue in the Windows 10 operating system. This error is typically caused by compatibility issues between software, drivers, and the system. However, there are several ways to resolve this problem. You can roll back drivers or perform a system restore in Windows.

What if the system fails to boot? In such a scenario, the ideal solution would be to use the Data Recovery Wizard tool. You could use the software with the simple steps mentioned above. Moreover, you even get the provision to preview photos and audio before selecting the recovery.