Free image compression
Free image watermark
Free image edit
Free QR code
Free Image Format ConversionSSDs (Solid State Drives) are the latest sensation in the storage industry, and Samsung currently dominates the market with exceptional performance across all price ranges. If you have recently upgraded from a hard drive to an SSD and encountered an error during the cloning process, displaying errors such as 400180 [061b34], 301001 [0497c9], or others, don't panic!
Continue reading this article as we will reveal the causes of the "Samsung SSD clone failed" error and guide you on how to resolve it!
Why Samsung SSD Cloning Failed
Samsung has developed the Samsung Data Migration software to facilitate configuration, backup, cloning, and various other tasks for users. If you encounter errors with the mentioned error codes or any others while cloning your SSD using this tool, the issues could stem from several factors:
- The SSD has some bad sectors.
- The SSD is not properly connected or disconnected.
- The SSD might be encrypted; if so, decrypting it will allow you to clone it.
- A few sectors on the SSD could be fragmented.
- The SSD might have been accidentally converted to a dynamic disk.
- Page files on the disk could be enabled.
- Hibernation could be enabled.
Now that you're aware of a few reasons behind the failure of Samsung SSD cloning, let me guide you on how to resolve this issue as well.
How to Solve the Problem of Samsung SSD Cloning Failure
Therefore, there are seven different methods to resolve the "Samsung SSD clone failed" error and create a clone of your Samsung SSD.
Continue reading to discover the seven additional solutions that will assist you.
Fix 1: Check for Bad Sectors
Bad sectors on an SSD indicate that a section of the disk has become corrupted and is no longer accessible by your computer. The tools Partition Master is a comprehensive, all-in-one disk utility and configuration manager that allows you to execute various commands with just a few clicks. It can perform a Surface Test to help you identify all the bad sectors on your SSD.
With just a few clicks, Partition Master can accomplish the same task reliably. If you wish to examine and repair bad sectors on your SSD, download Partition Master and utilize it to detect and mend faulty bad sectors.
Step 1. Open AOMEI Partition Assistant. Right-click the disk that you wish to check, and then click "Surface Test".
Step 2. The operation will be performed immediately, and all bad sectors will be marked in red.
Fix 2: Decrypt BitLocker on Samsung SSD
Windows provided a feature called "BitLocker Encryption." If your SSD is encrypted with BitLocker, you'll need to decrypt it before cloning. Here's how to disable BitLocker: 1. Click on the Start button. 2. Type "BitLocker" in the search bar and select "Manage BitLocker" from the results. 3. Select the drive you want to decrypt (usually the C: drive). 4. Click on "Turn Off BitLocker." 5. Follow the on-screen instructions to complete the decryption process. This may take some time depending on the size of your data. 6. Once the decryption is finished, proceed with cloning the SSD using the cloning software. Remember that turning off BitLocker will temporarily leave your data unencrypted. It's essential to encrypt the cloned SSD again after the process if you want to maintain the security provided by BitLocker.
Step 1. Click on the "Start" button, then search for and open "Control Panel."
Step 2. Open "System and Security" and click "Bitlocker Drive Encryption."
Step 3. Click on "Turn off BitLocker."
Step 4. Next, in the popup window that appears, click on "Turn off BitLocker."
Once your SSD is decrypted, attempt to clone your drive, and it should hopefully function properly now.
Fix 3: Defragment the Drive
If there are numerous fragments on your SSD, you can utilize a disk defragmenter tool to manage it. Here's how to defragment the drive: 1. Open "Defragment and Optimize Drives" on your Windows computer. You can do this by searching for it in the Start menu or by typing "defragment" in the search bar. 2. In the "Optimize Drives" window that appears, select the SSD drive you want to defragment. 3. Click on "Analyze" to assess the fragmentation level of the SSD. Note that modern SSDs typically have less fragmentation compared to traditional HDDs. 4. If the analysis suggests defragmentation is necessary, click on "Optimize" or "Defragment." However, keep in mind that frequent defragmentation might not be recommended for SSDs as it can shorten their lifespan. 5. Wait for the process to complete. It should be relatively quick on an SSD. Remember that for optimal performance, it's essential to keep your software and operating system up to date.
Step 1. Click on the "Windows" button and open the "Control Panel."
Step 2. Look for "Administrative Tools" or "Windows Tools."
Step 3. Select "Defragment and Optimize Drives" and then click "Optimize."
That's correct! If this didn't assist you, proceed to explore our other solutions!
Fix 4: Disable Page Files
Page files refer to a section of your hard disk that is designated to function as RAM (Random Access Memory). This becomes particularly beneficial when you're running memory-intensive applications and your actual RAM is already at capacity. Other applications can then utilize the portion of the SSD (Solid State Drive) designated as RAM to continue operating smoothly.
Here's how to disable Page Files in English: 1. Press the "Windows" key + "R" on your keyboard to open the Run dialog box. 2. Type "sysdm.cpl" in the Run box and press "Enter" to open System Properties. 3. In the System Properties window, click on the "Advanced" tab. 4. Under the "Performance" section, click on the "Settings" button. 5. In the Performance Options window, click on the "Advanced" tab again. 6. Under the "Virtual Memory" section, click on the "Change" button. 7. Deselect the "Automatically manage paging file size for all drives" checkbox. 8. Select the drive where your Page File is currently located (usually the primary drive, C:). 9. Choose "No paging file" from the "Size" drop-down menu. 10. Click "Set" to apply the changes. 11. A warning message may appear, informing you about the risks of disabling the Page File. If you're sure you want to proceed, click "Yes." 12. Finally, click "OK" to close all windows and apply the changes. Please note that disabling the Page File might negatively impact system performance, especially if you have limited RAM. It's recommended to only do this if you have sufficient RAM or after consulting with an expert.
Step 1. Click on the "Start" button and search for "View advanced system settings."
Step 2. Choose "Settings" under the "Performance" section.
Step 3. Click on the "Advanced" tab and then select "Change."
Step 4. Deselect "Automatically manage paging file size for all drives" and choose "No paging file," then click "Set."
Step 5. Lastly, click on "OK."
Fix 5: Convert Dynamic Disk to Basic
If you weren't surprised yet, yes, using the tool Partition Master. It is an excellent tool for disk partitioning, and it also allows you to convert dynamic disks back to basic.
It's not difficult to use. Here's how:
Step 1. Install and launch tools Partition Master, then go to Disk Converter.
Step 2. Choose the disk conversion mode that suits your requirement:
- Convert Basic to Dynamic: convert a Basic disk to Dynamic.
- Convert Dynamic to Basic: convert a Dynamic disk to Basic.
Step 3. Select the target disk - Basic or Dynamic, confirm you've selected the correct disk, and click "Convert" to start.
0:00 - 0:18 Convert Basic Disk to Dynamic Disk; 0:19 - 0:36 Convert Dynamic Disk to Basic Disk.
Moreover, besides being a powerful partition conversion tool, Partition Master can also help you convert NTFS to FAT32, or convert MBR to GPT and vice versa.
Fix 6: Disable Hibernation Mode
继续操作以禁用休眠模式。
Step 1. Click on the "Start" button and search for "command prompt."
Step 2. Choose "Run as administrator."
Step 3. Type the command "powercfg /hibernate off" in the prompt.
Step 4. You have successfully disabled hibernation mode.
Fix 7. Try a Reliable Tool to Clone Samsung SSD When the built-in cloning options fail to work or you need a more efficient and user-friendly method, using a professional third-party tool can be a great solution. One such tool is the Samsung Data Migration Software. Here's how to use it: 1. **Download Samsung Data Migration Software**: Visit the [Samsung官网](https://www.samsung.com/semiconductor/minisite/ssd/software/data-migration/) and download the Samsung Data Migration Software for your operating system. 2. **Install the Software**: Once downloaded, install the software on your computer. Ensure that your Samsung SSD is connected to your system. 3. **Launch the Software**: Open Samsung Data Migration and follow the on-screen instructions. 4. **Select Source and Destination Drives**: In the software, choose your current HDD as the source and your new Samsung SSD as the destination. 5. **Start Cloning**: Review the settings and click on "Start" to initiate the cloning process. This may take some time, depending on the size of your data. 6. **Finish and Reboot**: After the cloning is complete, safely eject the original drive, and then boot from your new Samsung SSD. Remember, while Samsung Data Migration is a reliable tool, there are also other reputable cloning software options available, such as Acronis True Image, tools Todo Backup, or AOMEI Backupper. Choose one that suits your needs and preferences.
If you're unable to clone using Samsung's Data Migration software, you can utilize the cloning function in AOMEI Partition Assistant to clone your Samsung SSD. It supports both disk cloning and system cloning. Employing AOMEI Partition Assistant for cloning reduces the chances of failure and enables you to create a clone of your SSD with just a few simple steps.
Here's how it can be done:
Step 1. Select the source disk.
- Click "Clone" from the left menu. Select "Clone OS Disk" or "Clone Data Disk" and click "Next".
Choose the source disk and click "Next".
Step 2. Select the target disk.
- Translate into English:
- Select the desired HDD/SSD as your destination and click "Next" to proceed.
- Read the warning message and confirm by clicking the "Yes" button.
Step 3. View the disk layout and edit the target disk partition size.
When the program warns you that it will erase all data on the target disk, click “Continue” (If you have valuable data on the target disk, back it up beforehand).
You can choose "Autofit the disk," "Clone as the source," or "Edit disk layout" to customize your disk configuration. (Select the last option if you wish to allocate more space to the C drive.)
Step 4. Click "Start" to initiate the disk cloning process.
Apart from that, AOMEI Partition Assistant also supports to clone SD card, USB, or other drives.
Conclusion
Samsung's innovation in SSD technology is truly remarkable, but similar to any other product, their SSDs can also encounter errors or issues.
When encountering the error "Samsung SSD Clone Failed" while cloning your Samsung SSD, the solutions provided above should be of assistance. Alternatively, if you wish to save time and promptly create a clone of your Samsung SSD without dealing with the issue extensively, consider using a reliable cloning tool.
Download the tool Partition Master and create a clone of your Samsung SSD in just a few minutes.
"FAQ: Samsung SSD Cloning Failed"
Here is some additional information regarding Samsung SSD cloning issues:
1. Why is Samsung Data Migration not functioning properly?
It could be due to the following reasons:
- You have installed an outdated version of the Samsung Data Migration software.
- The hard drive or SSD does not have an operating system (OS) installed.
- The drive might be encrypted.
- The Samsung SSD is incompatible.
- Your Samsung SSD has bad sectors.
2. How do I resolve the Samsung Data Migration cloning failure?
You should first identify the root cause, and then, by following the aforementioned solutions, you should largely resolve the issue. If that doesn't work or if you're seeking an effortless way to clone your SSD, simply utilize the tool Partition Master to clone it quickly.
3. Can I use Samsung cloning software with other SSDs?
No, you won't be able to use Samsung's cloning software, "Samsung Data Migration," with SSDs from other manufacturers. This software is specifically designed to work with Samsung SSDs and is not compatible with SSDs from different brands.